Organizations: Indian Institute of Science Bangalore India · Robert Bosch Centre for Cyber Physical Systems Bangalore India · Ahmedabad University Ahmedabad India
Quadruped robots are often designed with rigid feet to simplify control and maintain stable contact during locomotion. While this approach is straightforward, it limits the ability of the legs to absorb impact forces and reuse stored elastic energy, leading to higher energy expenditure during locomotion. To explore whether compliant feet can provide an advantage, we integrate foot compliance into a reinforcement learning (RL) locomotion controller and study its effect on walking efficiency. In simulation, we train eight policies corresponding to eight different spring stiffness values and then cross-evaluate their performance by measuring mechanical energy consumed per meter traveled. In experiments done on a developed quadruped, the energy consumption for the intermediate stiffness spring is lower by ~ 17% when compared to a very stiff or a very flexible spring incorporated in the feet, with similar trends appearing in the simulation results. These results indicate that selecting an appropriate foot compliance can improve locomotion efficiency without destabilizing the robot during motion.
Learning-based quadrupedal locomotion typically relies on complex reward formulations that entangle task specification, operational limits, gait preference, and terrain adaptation within a single optimization objective. We instead treat these functions through distinct mechanisms: rewards for task specification, constraints for operational limits, energy minimization for gait preference, and exteroceptive perception for adapting energy use to terrain difficulty. We show that these components jointly enable efficient, terrain-adaptive locomotion, and that removing each component exposes a distinct failure mode. Our formulation removes explicit gait priors (including air-time, contact-count, and foot-clearance targets) in favor of emergent behavior. Compared to a conventional complex-reward baseline, our formulation achieves comparable terrain traversal while reducing cost of transport by 56% and operational-limit violations by 96%. The resulting policies transfer zero-shot to a physical Unitree Go2 using LiDAR-based elevation mapping. Project website with videos: https://tinyurl.com/locomposition.
Loukas Kordos, Leonard T. Franz, Simon Rappenecker +4
Quadruped mammals coordinate sagittal spinal bending with axial extension and compression during dynamic locomotion. Yet most robotic quadrupeds use rigid trunks, passively compliant spines with fixed properties, or actively controlled spines that track prescribed trajectories. Whether actively regulated spinal compliance can support faster dynamic locomotion remains unclear. We present SPARC, a compact 1.26-kg, 3-DoF sagittal-plane spine that combines revolute and prismatic motion with independently tunable task-space stiffness and damping. A floating-base impedance controller renders the desired task-space compliance, and benchtop tests show that the fitted axial stiffness matches commanded values within 1.5%. We integrate SPARC into an 8-DoF quadruped and evaluate it across 97 bounding trials under three spine configurations: impedance-controlled SPARC, the same SPARC module held near a fixed pose using position control, and a lightweight rigid spine. Impedance-controlled SPARC reaches 1.029 m/s, compared with 0.769 m/s for position-controlled SPARC and 0.673 m/s for the rigid spine. Impedance-controlled SPARC reaches higher speeds with larger axial motion and greater mechanical power exchange, while at matched speed it has a higher electrical cost of transport than the rigid spine, revealing an energetic trade-off. Code and hardware are available at: https://github.com/YueWang996/sparc
Human legs exhibit high efficiency, agility, and impact absorption, with toes playing a crucial role in these capabilities. While many attempts have been made to implement human-like toes in robots, they have not fully replicated human characteristics nor rigorously validated their benefits. We propose a 14-DOF biped robot emulating human toes' lightweight, high-torque, robust nature. To quantitatively analyze the effectiveness of the active toes in terms of agility, efficiency, and impact absorption, we developed a high-fidelity simulation training environment that reflects actual actuators with coupled transmissions and accurate power consumption. To ensure a fair comparison between configurations with and without active toes, we designed a minimal RL reward function and applied an identical training procedure to both. The simulation results indicate that, at 1.33 m/s walking, the toe-equipped robot reduced CoT by 17.5% and heel-strike GRF by 5.0% compared with the toe-ablation configuration. On the agility test, average and maximum path deviation decreased by 25.0% and 34.0%, respectively.