OpenSeisML: Open Large-Scale Real Seismic and well-log Dataset for Generative AI
Authors: Ipsita Bhar, Huseyin Tuna Erdinc, Thales Souza, Charles Jones, Felix J. Herrmann
Organizations: Georgia Institute of Technology, Atlanta, USA · Osokey Ltd, Henley-on-Thames, UK
Abstract
The advent of machine learning (ML) and computer vision has significantly accelerated seismic inversion workflows by reducing the computational cost of traditionally expensive iterative methods. However, the development and evaluation of ML methods remain limited by the scarcity of realistic velocity models, as most high-quality data are privately owned by oil and gas companies. To address this gap, we present OpenSeisML, a collection of real seismic datasets designed to support generative AI (Gen-AI) workflows for seismic inversion. The datasets are curated from publicly available surveys in the UK National Data Repository (NDR). When seismic volumes are in the time domain and wells are in depth, a time-to-depth conversion is required. We use checkshot data to establish the time-depth relationship and construct a velocity model through interpolation for accurate conversion of post-stack seismic data. Here, we present an automated data curation pipeline that enables seismic data preparation while ensuring reproducibility. The objective is to train a generative model that captures the statistical distribution of subsurface properties, enabling the synthesis of multiple statistically consistent realizations for uncertainty quantification which can act as a prior for seismic inversion.
Full waveform inversion (FWI) is the gold standard for subsurface imaging, with applications from carbon sequestration to energy and mineral exploration to earthquake hazard assessment. Machine learning approaches to FWI need field-scale, geologically diverse, and physically realistic training data, but existing resources such as Marmousi, SEAM, and OpenFWI fall short on spatial extent, temporal extent, geological diversity, and physical realism. We address these limitations with SubsurfaceGen, a GPU-accelerated generator for 3D velocity models and seismic data. Along with SubsurfaceGen, we release a paired dataset of 4,276 2D velocity slices, 5 s wavefields, and 8 s shot gathers drawn from 42 realistic, field-scale 3D velocity models, each spanning 10 km x 10 km laterally and 6.19 km deep at 10 m resolution. The dataset spans six geological settings -- four built with SubsurfaceGen and two drawn from prior sources -- relevant for carbon sequestration and hydrocarbon exploration. We use this dataset to evaluate neural operators on wavefield prediction and encoder-decoders on end-to-end velocity inversion, holding out one geological setting for out-of-distribution testing. These experiments surface failure modes at field-scale and demonstrate how SubsurfaceGen and the associated dataset can impact ML-based FWI.
Self-supervised learning (SSL) has emerged as a promising approach to seismic data denoising as it does not require clean reference data. In this work, the deployment of the Noisy-as-Clean (NaC) method was evaluated for real seismic data denoising under controlled conditions. Two independent seismic acquisitions, each comprising noisy and filtered data, were organized into four real datasets. The NaC SSL method was adapted to add real noise to the noisy input, controlled by a parameter. An experimental protocol with ten experiments was designed to compare different strategies for deploying the NaC SSL method with the supervised learning baseline, using identical network topology and hyperparameters. The models were evaluated in terms of denoising performance, computational cost, and generalization capability. The results show that the synthetic additive white Gaussian noise (AWGN) is inadequate for the denoising of seismic data within the NaC method, and performance strongly depends on the compatibility between the injected and actual noise characteristics. Furthermore, both the characteristics of the seismic data and the noise level influence the performance of the model. Self-supervised fine-tuning on test data has improved SSL performance, whereas no such gain was observed for fine-tuning of supervised models. Finally, NaC has shown to be a simple, effective, and model-independent method that offers a feasible solution for the denoising of real seismic data.
Giovanny A. M. Arboleda, Claudio D. T. de Souza, Carlos E. M. dos Anjos +6
The application of generalist multimodal models (GMMs) to specialized scientific domains remains limited due to the scarcity of comprehensive domain-specific datasets that integrate multiple data modalities beyond text and images. In seismology, understanding earthquake phenomena requires the synthesis of timeseries waveform data, geographical imagery, and contextual metadata, a multimodal integration absent in existing seismic datasets. We present MultiSeismo, a large scale structured multimodal seismic dataset, comprising over 16K seismic events spanning 13 years (2010 to 2023) across diverse geographical regions. Each event data integrates waveform recordings from global station networks, intensity maps, population exposure visualizations, and a comprehensive textual description within a standardized JSON format. We additionally develop MISCE, a multimodal instruction set on top of raw data to enable supervised training and evaluation of GMMs on seismic reasoning tasks ranging from basic information retrieval to complex cross modal analysis. We leverage MISCE to finetune an existing multimodal model (Unified IO 2) enhanced with a specialized timeseries encoder, which yields SeisModal, the first domain specific multimodal model for comprehensive seismic analysis. Evaluation of state of the art multimodal models on MultiSeismo reveals significant challenges, particularly with time-series data processing for general purpose models, while demonstrating SeisModal's superior performance on seismic multimodal reasoning tasks. These results prove that MultiSeismo provides a rigorous benchmark for future multimodal research in seismology and validate the success of our domain specific architectural adaptations.