ShapeBench: A Scalable Benchmark and Diagnostic Suite for Standardized Evaluation in Aerodynamic Shape Optimization

Engineering shape optimization faces challenges in both expert-dependent problem setup and surrogate-model reliability. In practical aerodynamic design, optimization settings such as editable regions, deformation ranges, and design-preservation constraints are typically specified manually by experienced engineers, while surrogate-based optimization may become unreliable for heterogeneous geometry databases and out-of-distribution designs. To address these challenges, we propose a knowledge-constrained shape-optimization framework that translates knowledge-based constraints and user intent into quantifiable parameters of DFFD-based deformation operators, enabling engineering-aware and controllable constrained optimization. We further develop a Mixture-of-Experts Neural Operator (MoE-NO) to improve drag prediction and trend consistency over heterogeneous aerodynamic datasets. Based on the MoE-NO encoder and Mahalanobis distance, an uncertainty-estimation strategy is introduced to detect out-of-distribution geometries and selectively trigger physics-solver feedback for local sample enrichment. Experiments on in-house MPV, SUV, and Sedan datasets show that MoE-NO achieves a test-set MAPE of $1.16\%$ and a trend-prediction accuracy of $94.34\%$, outperforming the best baseline results of $1.52\%$ and $90.34\%$, respectively. Vehicle shape-optimization experiments further yield CFD-validated drag coefficient reductions of approximately $4\%$ to $10\%$.

Active multi-fidelity surrogate modeling is developed for multi-condition airfoil shape optimization to reduce high-fidelity CFD cost while retaining RANS-consistent aerodynamic metrics. The framework couples a low-fidelity-informed Gaussian process regression transfer model with uncertainty-triggered sampling and a synchronized elitism rule embedded in a hybrid genetic algorithm. Low-fidelity XFOIL evaluations provide inexpensive features, while sparse RANS simulations are adaptively allocated when predictive uncertainty exceeds a threshold; elite candidates are mandatorily validated at high fidelity, and the population is re-evaluated to prevent evolutionary selection based on outdated fitness values produced by earlier surrogate states. The method is demonstrated for a two-point problem at $Re=6\times10^6$ with cruise at $α=2^\circ$ (maximize $E=L/D$) and take-off at $α=10^\circ$ (maximize $C_L$) using a 12-parameter CST representation. Independent multi-fidelity surrogates per flight condition enable decoupled refinement. The optimized design improves cruise efficiency by 41.05% and take-off lift by 20.75% relative to the best first-generation individual. Over the full campaign, RANS evaluations were required for only 14.78% and 9.5% of the condition-specific candidate evaluations at cruise and take-off, respectively. These percentages quantify the reduction in high-fidelity usage relative to the fixed automated RANS workflow adopted as the high-fidelity reference in this study.

Accurate machine-learning models for aerodynamic prediction are essential for accelerating shape optimization, yet remain challenging to develop for complex three-dimensional configurations due to the high cost of generating training data. This work introduces a methodology for efficiently constructing accurate surrogate models for design purposes by first pre-training a large-scale model on diverse geometries and then fine-tuning it with a few more detailed task-specific samples. A Transformer-based architecture, AeroTransformer, is developed and tailored for large-scale training to learn aerodynamics. The methodology is evaluated on transonic wings, where the model is pre-trained on SuperWing, a dataset of nearly 30000 samples with broad geometric diversity, and subsequently fine-tuned to handle specific wing shapes perturbed from the Common Research Model. Results show that, with 450 task-specific samples, the proposed methodology achieves 0.36% error on surface-flow prediction, reducing 84.2% compared to training from scratch. The influence of model configurations and training strategies is also systematically studied to provide guidance on effectively training and deploying such models under limited data and computational budgets. To facilitate reuse, we release the datasets and the pre-trained models at https://github.com/tum-pbs/AeroTransformer. An interactive design tool is also built on the pre-trained model and is available online at https://webwing.pbs.cit.tum.de.