Industrial robotic object handling often involves boxes and packages whose mass and center of mass are not known in advance. These uncertainties affect the force--moment balance required for stable lifting, and improper regulation of contact wrenches can lead to slip, object drop, orientation deviation, or excessive squeezing. This paper presents a friction-aware dual-arm box-handling framework for objects with unknown inertial properties. The proposed approach estimates the object mass and center of mass online from measured contact wrenches, and computes friction-feasible contact forces and torsional moments through a second-order cone program (SOCP) under ellipsoidal friction-limit-surface constraints. An offline trajectory refinement stage is also included to reduce undesired object--environment contact when geometric constraints are present. By enforcing friction feasibility as a hard constraint and minimizing contact effort within the feasible region, the framework achieves stable lifting without treating slip avoidance and excessive squeezing as separately tuned objectives. Experiments on a real dual-arm robotic system under different center-of-mass configurations demonstrate that the method lifts objects with unknown inertial properties while maintaining stable frictional contact.
Accurately estimating object mass and friction is fundamental to reliable robotic manipulation. While interactive perception is powerful, most approaches rely on specialized hardware like force/torque sensors, limiting scalability. This paper introduces PhyPush, a physics-guided Transformer that estimates an object's mass and friction coefficient using only end-effector velocity from a single push, data readily available on standard robotic arms. By incorporating Newton's second law and the Coulomb friction model through a physics-guided loss, the model improves physical consistency and generalizes to unseen objects and surfaces. Across diverse setups, PhyPush consistently achieves highly accurate estimations in challenging out-of-domain conditions. In simulation, it reduces error by over 10% compared to a baseline with privileged force data, while in real-world experiments, it successfully zero-shot transfers from simulation to outperform a purely data-driven baseline.
Koyo Fujii, Luis Figueredo, Praminda Caleb-Solly +4
Unknown payloads can strongly affect compliant robotic manipulation, especially when the payload center of mass is not aligned with the tool center point. In this case, the payload generates an offset wrench at the robot wrist. During motion, this wrench is not only related to payload weight, but also to payload inertia. If it is not modeled, the compliant controller can interpret it as an external interaction wrench, which causes unintended compliant motion, larger tracking error, and reduced transport accuracy. This paper presents a wrench-aware admittance control framework for unknown-payload pick-and-place using a UR5e robot. The method uses force-torque measurements in two different roles. First, a three-axis translational excitation term is used to reduce payload-induced force effects during transport without making the robot excessively stiff. Second, after grasping, the controller first estimates payload mass for transport compensation and then estimates the payload CoM offset relative to the TCP using wrist force-torque measurements collected during the subsequent translational motion. This helps improve object placement and stacking behavior. Experimental results show improved transport and placement performance compared with uncorrected placement while preserving compliant motion.
Estimating the 3D center of mass of unknown objects is challenging when grasping is infeasible, geometry is irregular, or mass distribution is uneven. We present a force-based method that estimates CoM height and mass from a single sub-critical tipping experiment by a robot manipulator. The robot applies a quasistatic elevated push and retract motion, using force-angle measurements recorded during tipping to identify parameters from the object trajectory. Our proposed push-retract cycle mitigates frictional bias, enabling generalized fitting. We experimentally validate our method using a robot manipulator with a six-axis force torque sensor on varying types of objects without prior shape information and without specific models. We also propose a method to prevent toppling, keeping the object in a sub-critical tipping regime by leveraging a safety margin. In experimental studies, our method recovers mass, CoM height, and toppling angle with relative errors below 5.0 percent across all unknown objects. This work demonstrates reliable 3D inertial parameter estimation under proper safety thresholds in tipping. Our proposed method informs and enables reliable non-prehensile manipulation and robotic grasping of challenging objects that were previously infeasible.