CRB-Guided Framework Design and Resource Allocation for Indoor mmWave ISCC Systems

Integrated Sensing and Communication (ISAC) combines sensing and communication to efficiently utilize wireless resources and is emerging as a key paradigm for next-generation wireless networks. By leveraging the wide bandwidth, high frequencies, and massive antenna arrays of 5G-Advanced and 6G systems, ISAC enables physical-layer sensing using Channel State Information (CSI). The 3rd Generation Partnership Project (3GPP) Release 19 identifies 32 potential ISAC use cases, with particular emphasis on detecting and tracking moving objects. In this work, we address the Sensing for Railway Intrusion Detection use case, where intruders, including wildlife, entering a railway track can pose serious collision risks. We generated 22,695 CSI matrices with corresponding ground truth using a 3D-rendered railway environment and the Sionna radio simulator. We developed a machine learning model combining a three-dimensional Convolutional Neural Network (3D CNN) and Bidirectional Long Short-Term Memory (BiLSTM) network to detect intruders in the track danger zone and estimate their real-time position relative to the train, velocity, and time to collision. On synthetic CSI data, the model achieves 99.57% intruder-detection accuracy on a balanced test set and a combined Mean Absolute Error (MAE) of 0.4240 for position, velocity, and time-to-collision prediction. These results demonstrate the potential of CSI-based ISAC sensing with machine learning for reliable railway intrusion detection. The complete codebase for CSI generation, preprocessing, and model development is publicly available at https://github.com/EdgeIntelligenceLab/6g-isac-railway-intrusion-detection.

In this paper, we study an unmanned aerial vehicle (UAV)-assisted integrated sensing and communication (ISAC) system, where a UAV enhances the sensing capability of a base station (BS) towards a target while ensuring reliable communication towards a downlink user. This architecture is practically attractive for future wireless networks due to the UAV's controllable mobility and adaptive sensing coverage in wireless environments. The sensing performance is characterized by the average Cramér-Rao bound (CRB), which quantifies the minimum variance of the unbiased angle-of-arrival estimation. To enhance the sensing performance, the UAV trajectory and beamforming parameters are jointly optimized under power and mobility constraints, while satisfying communication requirements to the downlink user. To address the resulting non-convex problem, we employ null-space projection for beamforming design and adopt deep reinforcement learning for the trajectory optimization over a discrete-time scale. In each time slot, beamforming is optimized based on the channel state information to improve CRB performance while mitigating interference between the BS and the communication user. Simulation results demonstrate that the proposed method significantly reduces the time-averaged CRB by over 10%, compared with the ISAC system without UAV assistance, and also achieves a higher sensing accuracy than both the fixed-UAV-trajectory and the maximum-ratio-transmission-based beamforming benchmarks.

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.