RocketSmith is an agentic system which intelligently automates the DFAM process for the development of high powered rockets suitable for launch. The system utilizes a large language model to orchestrate the execution of software tools to validate design characteristics such as flight stability and generate the parametric design components for the rocket assembly. A collection of subagents and skills enable optimization workflows of flight parameters via iteration in both zero-shot and human-in-the-loop workflows. With this system, four distinct high power rockets with various motor and assembly configurations were developed utilizing the unique design capabilities of additive manufacturing. These assembly components were fabricated using various FDM printers, manually evaluated for flight readiness, and flight tested at a launch event. From these tests, all rockets achieved a stable launch and two of the four rockets were successfully recovered in reflyable condition. The altimeter data validated that the rockets achieved an altitude 80% of the expected apogee predicted by the agentic system, establishing consistency between simulation and experimentation.
Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.
The automated design of agentic systems offers a promising pathway for scaling large language models (LLMs) beyond single-agent reasoning. While prior work has advanced task performance through handcrafted or automatically generated multi-agent workflows, robustness is often treated as an afterthought, leaving systems vulnerable to external adversaries and internal failures. We propose AutoRAS, a framework for the Automated design of Robust Agentic Systems. AutoRAS formulates system design as generating a sequence of symbolic primitives that jointly encode structural connectivity and behavioral actions, and learns to optimize this sequence using execution-derived safety signals and flow-based sequence-level objectives. Extensive experiments show that AutoRAS achieves the best performance in both vanilla and adversarial settings, with the smallest performance degradation under attacks. Further analyses demonstrate strong transferability, stable optimization behavior, stability across primitive sets, and favorable cost trade-offs. Our code is available at \href.
Parts manufactured with Fused Deposition Modeling (FDM) often require Design for Additive Manufacturing (DFAM) modifications to ensure printability, structural integrity, and reduced post-processing. Current slicers identify defects such as steep overhangs but are unable to modify the underlying geometry. This work presents AgentsCAD, a multi-agent system that bridges raw boundary-representation (B-Rep) geometry and Large Language Model (LLM) reasoning to automate targeted DFM. The workflow begins by parsing a STEP file. The agentic system detects overhangs above a 45°threshold, constructs a face-adjacency topology graph, and optionally injects semantic feature labels from a GraphSAGE model trained on MFCAD++ (59,665 parts), before dispatching a Claude Sonnet design-reasoning agent that recommends reorientations, fillets, chamfers, and similar modifications. A GPT-4o vision-language verifier inspects rendered views to confirm geometric integrity. Outputs include a modified STEP file and a human-readable report. A test case on a birdhouse model demonstrates that the system correctly diagnoses overhangs, selects appropriate defect mitigation strategies, and proposes physically valid corrections, partially solving the geometry-to-language translation problem central to LLM-driven CAD modification.