This work addresses sequentially grasping multiple objects with a single dexterous hand without releasing those already held. Most dexterous grasping methods commit all of the hand's degrees of freedom to a single object, underutilizing its dexterity and leaving no redundancy for subsequent grasps. The proposed solution, MoDex, is a diffusion policy that predicts the next gripper pose directly from observations, conditioned on an opposition space and point cloud. The opposition space condition specifies which fingers participate in the current grasp, enabling the gripper to use only a subset of its available degrees of freedom while reserving the remaining degrees of freedom for subsequent grasps. To facilitate sim-to-real transfer, MoDex is trained in two stages: first through imitation learning on expert demonstrations, and subsequently through reinforcement learning fine-tuning, which consistently improves success rates over the pre-trained policy. We evaluate MoDex in simulation on a MuJoCo-based Franka Emika Panda robot equipped with an Allegro Hand and on the corresponding real-world hardware platform. Across both simulation and real-world experiments, MoDex achieves higher success rates than the evaluated learning-based baselines, improving performance by 2.92-17.92% and 6.67-17.78%, respectively. Project page: https://modex2026.github.io/.
Dexterous robot hands offer rich opportunities for multifunctional manipulation, where a robot must execute multiple skills in sequence while maintaining control over previously grasped objects. Most prior work in dexterous manipulation focuses on single-object, single-skill tasks. In contrast, our insight is that many sequential tasks require resource-aware grasps that conserve fingers for future actions. In this paper, we study sequential grasp-conditioned dexterous manipulation, where a robot first grasps an object and then performs a second, distinct manipulation subtask while preserving the initial grasp. We introduce HANDFUL, a learning framework that models finger usage as a limited resource and encourages exploration of resource-aware grasps through finger-level contact rewards. These grasps are subsequently selected for downstream tasks via curriculum-based policy learning. We further propose HANDFUL-Bench, a simulation benchmark that introduces sequential dexterous manipulation tasks across multiple secondsubtask objectives, including pushing, pulling, and pressing, under a shared grasp-conditioned setup. Extensive simulation results demonstrate that prioritizing resource-aware grasps improves second-subtask success and robustness compared to a baseline that greedily optimizes the initial grasp before attempting the second subtask. We additionally validate our approach on a real dexterous LEAP hand. Together, this work establishes resource-aware grasp planning as a key principle for multifunctional dexterous manipulation. Supplementary material is available on our website: https://handful-dex.github.io.
Dexterous manipulation requires planning a grasp configuration suited to the object and task, which is then executed through coordinated multi-finger control. However, specifying grasp plans with dense pose or contact targets for every object and task is impractical. Meanwhile, end-to-end reinforcement learning from task rewards alone lacks controllability, making it difficult for users to intervene when failures occur. To this end, we present GRIT, a two-stage framework that learns dexterous control from sparse taxonomy guidance. GRIT first predicts a taxonomy-based grasp specification from the scene and task context. Conditioned on this sparse command, a policy generates continuous finger motions that accomplish the task while preserving the intended grasp structure. Our result shows that certain grasp taxonomies are more effective for specific object geometries. By leveraging this relationship, GRIT improves generalization to novel objects over baselines and achieves an overall success rate of 87.9%. Moreover, real-world experiments demonstrate controllability, enabling grasp strategies to be adjusted through high-level taxonomy selection based on object geometry and task intent.
Large-scale dexterous grasp datasets encode rich priors over hand-object interaction, but their use has largely been confined to grasp generation and pick-and-place manipulation. We study whether such data can instead support functional dexterity in articulated tool use, where a robot must acquire a tool, maintain contact, and operate its functional moving parts. We adapt a hierarchical imitation learning framework that combines high-level hand sub-goal prediction with a low-level goal-conditioned controller. We construct a 355k-trajectory grasp-pretraining dataset from large-scale dexterous grasp annotations and use it to pretrain the low-level controller. The controller is then fine-tuned on downstream task demonstrations. To evaluate this setting, we introduce DexCraft, a simulation benchmark with six articulated tool-use tasks requiring coordinated finger motion. Across simulation and real-world experiments, our approach outperforms end-to-end diffusion policy baselines and hierarchical policies trained from scratch. In the real world, it improves full-task success by 33.3 percentage points over DP3. These results show that grasp datasets can serve not only as resources for grasp synthesis, but also as scalable pretraining data for contact-rich dexterous manipulation. Videos are shown on https://yingyuan0414.github.io/grasp2dexterity/ .