Dense Force Estimation with an Event-based Optical Tactile Sensor

Curved tactile fingertips for dexterous manipulation must resolve fine contact geometry, distinguish normal and tangential loads, and capture transient signals. Existing curved vision-based tactile sensors struggle to combine accurate 3D reconstruction, three-axis force estimation, and high-speed processing in a compact form. This article presents FasTac, a curved vision-based tactile sensor integrating multispectral photometric stereo, dynamic-convolution force estimation, and hardware acceleration on a field-programmable gate array (FPGA). Single-image-sensor simultaneous multispectral imaging provides spatially aligned observations for robust surface normal estimation, followed by boundary-prior fast Poisson depth reconstruction. HyperForce uses position-aware dynamic convolution to model the spatially nonuniform mechanical response of curved elastomers and estimate three-axis forces. The complete image-to-normal-force pipeline is deployed on an FPGA. Experiments show that near-infrared (NIR) illumination and the boundary prior decrease depth mean absolute error (MAE) from 0.2730 mm to 0.0415 mm; HyperForce achieves normalized mean absolute error (NMAE) values of 2.74% and 2.39% for normal and shear forces, respectively; and FPGA deployment shortens processing latency from 3.26 ms on the GPU to 1.09 ms. Multi-object reconstruction, feedback grasping, and vibration measurement validate fine geometric perception, stable force feedback, and dynamic contact sensing.

Event-based tactile sensing offers low-latency signal acquisition for contact-rich robotic interaction. This paper investigates contact-angle estimation using event streams from an event-based tactile sensor (NeuroTac) and compares three event-derived spatial contour representations: a dynamic representation capturing recent event activity, a static representation recovering a more persistent contact state, and their combined representation. Across the evaluated motion scenarios, all representation pipelines exhibited P99 processing latency below 10 ms at all tested sampling intervals, demonstrating their potential for high-frequency event-based tactile angle estimation in robotic manipulation. The static representation consistently achieved marginally better performance than the dynamic and combined representations under scenario-specific training, yielding a mean overall MAE of 0.160° during continuous sensor rolling and a stop-phase mean MAE of 0.251° during randomly inserted motion interruptions. It also exhibited smaller performance fluctuations across speed and indentation depth variations than the other two representations.

Tactile signals provide direct contact and force measurements that are essential for understanding physical interactions and enabling dexterous robotic manipulation. However, tactile sensing requires direct measurement at contact interfaces, making large-scale data collection reliant on intrusive, costly, and restrictive instrumentation. We present TouchSight, a monocular egocentric vision framework for dense full-hand contact force prediction that leverages 500 hours of pressure-glove recordings and extensive hand-object interaction (HOI) data. To address the appearance gap between gloved training data and bare-hand real-world scenarios, we construct TwinTouch-20H: 20 hours of paired visual data in which generative video models re-render gloved recordings as bare-hand observations against new backgrounds while preserving the original measured tactile labels. TouchSight predicts dense force from both gloved and generated bare-hand videos, outperforms prior contact prediction methods on OakInk2, qualitatively generalizes to natural bare-hand egocentric videos from unseen datasets, and improves consistently as glove supervision scales. These results demonstrate that dense tactile signals can be recovered from egocentric vision alone, without tactile instrumentation at capture time.