VFILC: Accurate Frequency Extrapolations in Imitation Learning via Sampling Frequency ILC

Fast execution of contact-rich manipulation is critical for practical deployment, yet providing fast demonstrations for imitation learning (IL) remains challenging: humans cannot demonstrate at high speed, and naively accelerating demonstrations alters contact dynamics and induces large tracking errors. We present a method to autonomously refine time-accelerated demonstrations by repurposing Iterative Reference Learning Control (IRLC) to iteratively update the reference trajectory from observed tracking errors. However, applying IRLC directly at high speed tends to produce larger early-iteration errors and less stable transients. To address this issue, we propose Incremental Iterative Reference Learning Control (I2RLC), which gradually increases the speed while updating the reference, yielding high-fidelity trajectories. We validate on real-robot whiteboard erasing and peg-in-hole tasks using a teleoperation setup with a compliance-controlled follower and a 3D-printed haptic leader. Both IRLC and I2RLC achieve up to 10x faster demonstrations with reduced tracking error; moreover, I2RLC improves spatial similarity to the original trajectories by 22.5% on average over IRLC across three tasks and multiple speeds (3x-10x). We then use the refined trajectories to train IL policies; the resulting policies execute faster than the demonstrations and achieve 100% success rates in the peg-in-hole task at both seen and unseen positions, with I2RLC-trained policies exhibiting lower contact forces than those trained on IRLC-refined demonstrations. These results indicate that gradual speed scheduling coupled with reference adaptation provides a practical path to fast, contact-rich IL.

Imitation learning for robotic manipulation relies on large sets of human demonstration trajectories, which are often noisy and temporally irregular due to variable operator speed, intermittent pauses, and inconsistent action density. A common preprocessing strategy is time-uniform downsampling to shorten sequences, but it cannot effectively remove speed-induced non-uniformity or redundant pauses. This mismatch degrades data quality and hinders policy learning. To address this issue, we propose Information-Standardized Trajectory Resampling (ISR), an offline preprocessing method for effective imitation learning. ISR resamples each trajectory by enforcing approximately equal information distance between adjacent points. Specifically, we map trajectories onto an information-modulated Riemannian manifold and perform geodesic-equidistant parameterization. We construct an information-intensity field from velocity and acceleration norms: the velocity term removes small-motion redundancy, while the acceleration term preserves high-curvature and fine-manipulation phases. We evaluate ISR on three real-world manipulation tasks with mainstream imitation learning policies. Compared with the baseline time-uniform 3x downsampling, ISR improves task success rates by about 25%, remains robust across datasets collected from different operators, and reduces both dataset size and training cost. The code and videos are publicly available at https://d-robotics-ai-lab.github.io/isr.page.

Flow matching trains a neural network to regress the conditional velocity along a linear interpolant between noise and data, and the number of network evaluations~(NFE) sets the cost of sampling. The straight-line interpolant carries an implicit choice: the sample moves at constant speed throughout the trajectory. We relax this choice and introduce Velocity Scheduled Flow Matching~(VSFM), which replaces the conditional target $x_1 - x_0$ with $v(t)(x_1 - x_0)$ for any nonnegative profile $v:[0,1]\to\mathbb{R}_{\geq 0}$ satisfying $\int_0^1 v\,dt = 1$. We study six polynomial profiles drawn from motion planning. The first use of VSFM is at inference time: a pretrained linear flow-matching model can be sampled under any admissible profile by integrating its ODE on a non-uniform $τ$-schedule, with no retraining and no additional computation; on CIFAR-10 this lowers FID by up to $19.8\%$. Training from scratch under a braking profile gives a further reduction of $17.4\%$ at $4$~NFE. Both gains follow from the local truncation error of the Euler integrator on the induced grid.