cs.ROJun 24, 2026

SA-LIVO: Efficient LiDAR-Inertial-Visual Odometry with Subspace-Aware Degeneracy Handling

Authors: Yinong Cao, Xin He, Yuwei Chen, Shijie Liu, Chunlai Li, Jianyu Wang

Abstract

Tightly coupled LiDAR-visual-inertial odometry (LIVO) fuses precise geometric depth with complementary visual measurements, yet its exteroceptive sensors face independent failure modes: LiDAR degenerates when scan geometry is under-constrained, while visual measurements degrade under adverse illumination or texture absence. Existing countermeasures, including binary degeneracy detection, covariance inflation, and scene-level quality gating, operate at the modality level and leave the direction-dependent structure of the joint information matrix unaddressed. Consequently, visual residuals enter pose directions where LiDAR is well-constrained, while in deficient directions visual compensation disperses across the full state space rather than concentrating where needed. We propose SA-LIVO, a LiDAR-inertial-visual odometry system addressing these limitations through direction-selective fusion and information-efficient processing. The Subspace-Aware Information Fusion (SAIF) framework eigendecomposes the joint LiDAR-visual information matrix and applies a linear-clamp soft gate per eigendirection, attenuating degenerate directions while preserving observable ones at full strength. LiDAR and visual residuals are then jointly optimized in one InEKF loop at a shared linearization point. Since visual information contributes only where LiDAR is deficient, photometric Jacobians are assembled once before the loop and reused across iterations, avoiding the per-iteration cost of conventional iterated filters. Experiments on 29 sequences from three benchmarks (HILTI'22, New College, Oxford Spires) and concurrent-degradation scenarios show accuracy competitive with the strongest baselines and bounded drift where competing systems diverge. SA-LIVO averages 12.3 ms per frame on a laptop CPU and 26.8 ms on an embedded ARM board without GPU, with 3.6-6.3x lower peak memory. The code will be open-sourced.

Explore similar work

CardsList
Jun 17, 2026cs.RO

FAST-LIVGO: A Degeneracy-Robust LiDAR-Inertial-Visual-GNSS Fusion Odometry

Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative constraints without augmenting historical anchor states. We further design a degeneracy-aware dual-mode outlier rejection strategy that switches between LIVO-prior-guided rejection and GNSS-aided recovery according to the LIVO degeneracy level. Experiments on the public M3DGR dataset and a custom 20~m/s fixed-wing UAV dataset demonstrate that our system reduces accumulated drift and map ghosting, outperforming state-of-the-art methods in accuracy and robustness.
Zhiyu Chen, Chunran Zheng, Jiayu Wen +4
Robust Lidar-Inertial OdometryOdometryState EstimationRejection
AskPDF
Aug 6, 2026cs.RO

KILVO: Kinematic-Inertial-LiDAR-Visual Odometry with Robust Multimodal Adaptation for Humanoid Robots

This article presents a kinematic-inertial-LiDAR-visual odometry for humanoid robots, called KILVO. Tailored to the platform features, requirements, and real-world complexity, it fully utilizes the sensors commonly equipped on humanoid robots, including joint encoders, IMU, LiDAR, and camera, within an asynchronous-sequential hybrid error-state iterated Kalman filter (ESIKF). Specifically, inertial data are used for prediction, leg kinematics are processed asynchronously at a high rate and provide proprioceptive constraints, while exteroception is updated sequentially, first by registering LiDAR points for geometric priors and then by updating the visual component via photometric errors. Moreover, the framework is elaborately designed with multimodal adaptation for resilience to sensor failures. A compact contact estimation module is also developed, sharing information with state estimation without additional sensors. Extensive experiments on public datasets and in the real world across multiple humanoid robots, gait patterns, and scenarios demonstrate that KILVO achieves highly competitive accuracy, efficiency, and output rates, with strong robustness against sensor degradation and failures, making it more suitable for humanoid robots than state-of-the-art fusion methods. Our code and datasets are released on GitHub.
Jixin Gao, Fucheng Liu, Teng Zhang +1
Robust Lidar-Inertial OdometryEgo-MotionHumanoid Robots
AskPDF
Sep 16, 2026cs.RO

Dynamic-LIVO: A Dynamic-Aware LiDAR-Inertial-Visual Odometry System Using Spatio-Temporal Normals

This paper proposes Dynamic-LIVO, a dynamic-aware LiDAR-Inertial-Visual Odometry (LIVO) system for robust state estimation and static colored mapping in dynamic environments. Dynamic-LIVO employs Spatio-Temporal (S-T) normal analysis to identify dynamic LiDAR points and propagates the resulting classification to both LiDAR-inertial and visual-inertial updates, preventing dynamic LiDAR measurements and their associated visual observations from affecting state estimation and mapping. However, S-T normal estimation can be unreliable in newly observed and spatially sparse regions due to insufficient spatio-temporal observations. To address this issue, we introduce a time-delayed S-T normal estimation strategy that defers the classification of insufficiently constrained points and re-evaluates them as additional observations become available. This strategy improves dynamic classification reliability while preserving valid static points for map construction. Extensive experiments on public and self-collected datasets with diverse sensor configurations demonstrate that Dynamic-LIVO improves localization accuracy and produces cleaner static colored maps in challenging dynamic environments. The source code and self-collected dataset will be publicly released upon acceptance.
Zhixin Zhang, Samuel Ahiwe, Matthew Hale +2
Robust Lidar-Inertial Odometry
AskPDF