Dynamic-LIVO: A Dynamic-Aware LiDAR-Inertial-Visual Odometry System Using Spatio-Temporal Normals

Robust state estimation and mapping in long-term, large-scale, and highly dynamic environments remains a key challenge in robotics. Existing LiDAR-Inertial-Visual Odometry (LIVO) systems achieve strong local accuracy but suffer from accumulated drift over long distances and may fail in geometrically degraded or textureless scenes. Meanwhile, GNSS-aided fusion frameworks often rely on LiDAR or visual odometry for state prediction and outlier rejection, making them vulnerable when odometry degenerates. To address these limitations, we propose a tightly coupled LiDAR-Inertial-Visual-GNSS fusion framework based on an Error-State Iterated Kalman Filter. An online spatiotemporal alignment module using Dynamic Time Warping is introduced for highly dynamic conditions. To better exploit GNSS precision, we develop observation models based on Doppler shifts and fixed-anchor Time-Differenced Carrier Phase, providing millimeter-level relative constraints without augmenting historical anchor states. We further design a degeneracy-aware dual-mode outlier rejection strategy that switches between LIVO-prior-guided rejection and GNSS-aided recovery according to the LIVO degeneracy level. Experiments on the public M3DGR dataset and a custom 20~m/s fixed-wing UAV dataset demonstrate that our system reduces accumulated drift and map ghosting, outperforming state-of-the-art methods in accuracy and robustness.

Tightly coupled LiDAR-visual-inertial odometry (LIVO) fuses precise geometric depth with complementary visual measurements, yet its exteroceptive sensors face independent failure modes: LiDAR degenerates when scan geometry is under-constrained, while visual measurements degrade under adverse illumination or texture absence. Existing countermeasures, including binary degeneracy detection, covariance inflation, and scene-level quality gating, operate at the modality level and leave the direction-dependent structure of the joint information matrix unaddressed. Consequently, visual residuals enter pose directions where LiDAR is well-constrained, while in deficient directions visual compensation disperses across the full state space rather than concentrating where needed. We propose SA-LIVO, a LiDAR-inertial-visual odometry system addressing these limitations through direction-selective fusion and information-efficient processing. The Subspace-Aware Information Fusion (SAIF) framework eigendecomposes the joint LiDAR-visual information matrix and applies a linear-clamp soft gate per eigendirection, attenuating degenerate directions while preserving observable ones at full strength. LiDAR and visual residuals are then jointly optimized in one InEKF loop at a shared linearization point. Since visual information contributes only where LiDAR is deficient, photometric Jacobians are assembled once before the loop and reused across iterations, avoiding the per-iteration cost of conventional iterated filters. Experiments on 29 sequences from three benchmarks (HILTI'22, New College, Oxford Spires) and concurrent-degradation scenarios show accuracy competitive with the strongest baselines and bounded drift where competing systems diverge. SA-LIVO averages 12.3 ms per frame on a laptop CPU and 26.8 ms on an embedded ARM board without GPU, with 3.6-6.3x lower peak memory. The code will be open-sourced.

Robust and accurate odometry estimation is essential in modern robotics. In environments characterized by highly dynamic motion and sensor noise, odometry estimation becomes increasingly challenging. Autonomous racing combines both factors in an unstructured setting, where minimizing odometry latency is essential for stable closed-loop control. This paper introduces FAR-LIO, a highly optimized CUDA-accelerated LiDAR-inertial odometry framework developed for Fast, Accurate, and Robust performance. Our system leverages a novel CUDA-based voxel hashmap to enable parallelized nearest-neighbor search and efficient map updates. We employ a sparsity-aware Generalized Iterative Closest Point algorithm with adaptive thresholding on top of the CUDA-based voxel hashmap with adaptive density to achieve low-latency without compromising accuracy. An Extended Kalman Filter serves as a robust backend. It utilizes an upsampling and delay compensation strategy to fuse the LiDAR odometry with high-frequency IMU data, thereby ensuring a robust and smooth odometry output. We evaluate FAR-LIO across four different sensor setups, using both public datasets and data from two autonomous racecars driving at speeds of up to 250 km/h. FAR-LIO achieves an average 6.9% reduction in the positional error and 38.4% lower runtime compared to state-of-the-art baselines on target hardware using a single parameter set. This demonstrates its computational efficiency and broad applicability. To build upon our work, our code is available open-source on https://github.com/TUMFTM/FAR-LIO.