Handheld data collection systems, such as the Universal Manipulation Interface (UMI), enable scalable data collection across diverse environments but only capture observed actions rather than the desired actions executed by a robot controller. In contrast, teleoperation captures desired actions directly, but requires a robot in-the-loop. We revisit this trade-off through the lens of action validity across task phases. We observe that handheld trajectories provide valid supervision in tolerant, free-space phases, but can be poor supervision targets for contact-sensitive phases, requiring high stiffness to minimize tracking errors, resulting in large contact forces. We study the interaction between these two supervision types for contact-rich manipulation and find that training policies that combine handheld data with a small number of targeted teleoperated demonstrations provide an effective hybrid strategy. Specifically, rather than teleoperating the entire task, we only collect partial teleoperated demonstrations for task segments where base handheld policies fail. However, naively mixing handheld and teleoperated phase-specific data yields worse performance than training on handheld data alone. To address this mismatch between observed and desired supervision, we propose Bi-modal Routing for Imitation Data via Gated Experts (BRIDGE), a mixture of diffusion policy experts that routes between specialist task phase heads conditioned on the current robot state. Notably, our approach enables task-phase specific use of desired actions during contact sensitive segments and improves success rates over handheld-only baselines by up to 36.7% across three contact-rich manipulation tasks.
Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.
Contact-rich manipulation tasks such as tight-clearance insertion, connector mating, polishing, and surface-conforming wiping remain difficult for data-driven controllers because they couple discontinuous contact dynamics, partial observability, and strict safety constraints. No single sensing modality suffices: vision supplies global context before contact, force/torque (F/T) feedback governs interaction after contact, and proprioceptive pose provides a consistent kinematic backbone. Most prior imitation-learning policies for contact-rich tasks operate on uni- or bi-modal signals, and the few that fuse three modalities typically adopt off-the-shelf attention modules with no explicit prior on how attention mass should be distributed across task-relevant regions. We present Spacetime Optimal-Transport Attention (SO-TA), a tri-modal fusion backbone that replaces softmax-normalized patch attention by an entropy-regularized Optimal Transport (OT) alignment between force-pose-derived sub-queries and visual patches. Explicit marginal constraints act as a structured inductive bias for contact-rich tasks, encouraging conditioning-aware spatial selection that is stable across illumination, distractors, and partial occlusion. SO-TA is paired with a diffusion-based sequence policy mapping observation windows to pose-action chunks. We evaluate SO-TA on three real-robot tasks: tight peg-in-hole assembly, BCM wiring-connector insertion, and curved-surface mark erasing. With ~200 rollouts per condition, SO-TA reaches 100% success on tight peg-in-hole versus 93% for cross-attention at matched capacity, and retains 82.5% success under illumination, distractor, and partial-occlusion perturbations where a concatenation baseline drops to 43.5%. OT-derived patch heatmaps and leave-one-out modality-influence ratios provide interpretable, phase-dependent diagnostics.
Behavior cloning for robot manipulation relies on expert demonstrations. However, for tasks that require dynamic stability, precise contact timing, or dexterous coordination, human operators may find it hard or even impossible to collect data. We study this infeasible-demonstration regime and propose GLIDE: Guardrails for Learning from Infeasible Demonstrations Efficiently, a framework that infers task-specific failure modes and converts them into executable guardrails for data collection and policy deployment. Given a task description and the conditioning teleoperation code, GLIDE writes guardrails that use system states to filter teleoperation and policy commands, constrain failure-prone actions, and iteratively improve from trajectory feedback. Across three tasks, GLIDE discovers emergent guardrails that go beyond domain-expert hardcoded ones, improving data collection over naive VR teleoperation and domain-expert hardcoded guardrails. After refinement, GLIDE raises data-collection success from 0-10 percent to 70-90 percent across the three tasks. During policy execution, mixed-data guarded policies reach 70 percent, 60 percent, and 60 percent success on Tomato plate transfer, Marker handover and stand, and Wine serving tasks. These results show that GLIDE can support policy learning when direct demonstrations are infeasible. Project website: http://guardrail-policy.github.io/