astro-ph.IMJun 26, 2026

Differentiable design of the PIAA-ZWFS: a flexible wavefront sensor that approaches the fundamental limit

Authors: A. K. TarasS. Y. HaffertL. Desdoigts

Abstract

Extreme adaptive optics (AO) is necessary for high contrast astronomy at scales of the habitable zone of nearby systems. We seek to evaluate wavefront sensors that approach fundamental limits of wavefront sensing, enabling adaptive optics systems to run faster or on fainter targets. We present the phase-induced amplitude apodisation Zernike wavefront sensor (PIAA-ZWFS): an adaptation of the conventional Zernike wavefront sensor (ZWFS) that leverages lossless apodisation of the pupil to concentrate the starlight in the focal plane. We optimise and evaluate the sensor with a differentiable modelling framework, drawing on concepts from Bayesian experimental design to minimise the variance of a maximum likelihood estimator that uses the system in the high Strehl regime. Our architecture shows state-of-the-art performance in simulation for different apertures, bandwidths, photon fluxes and source sizes, closing the gap to the fundamental limit by a factor 10 (2.5) compared to the conventional ZWFS (optimised ZWFS) in a typical photon-limited case. For extended sources, we show that even an ideal point source sensor rapidly becomes sub-optimal, and our system outperforms it for stellar diameters larger than 0.8λ/D. We verify that these gains do not come at the cost of dynamic range with either linear or non-linear reconstructors. Finally, we present a proof that there must be a trade-off between the information gained about amplitude and phase errors for any wavefront sensor. The PIAA-ZWFS is a viable wavefront sensor operating near the fundamental sensitivity limits.

Explore similar work

Jun 24, 2026physics.optics

Hybrid deep learning-based phase diversity method for wavefront reconstruction

The efficiency of high-power laser systems is limited by wavefront distortions in the beam, particularly non-common path aberrations, which reduce the peak intensity at the focal plane. Compensating for these aberrations requires the calibration of the adaptive optics system. Conventional calibration methods rely on a time-consuming iterative optimization that is highly sensitive to initial conditions. While deep learning-based models offer high speed, they often demonstrate insufficient accuracy. In this work, we present a hybrid wavefront reconstruction method that combines a convolutional neural network to generate an initial estimate of the wavefront distortions, with the L-BFGS (Limited-memory Broyden-Fletcher-Goldfarb-Shanno) algorithm for its subsequent refinement. In numerical simulations, the method achieved an efficiency of 0.99\sim 0.99 in 80% of the cases for a root-mean-square (RMS) of wavefront distortions ranging from 0 to 1.3λ1.3λ. In a physical experiment, for initial wavefront distortions with RMS values from 0.15 to 0.6λ0.6λ, the method achieved an efficiency of 0.75\sim 0.75. As a result, focusing with a Strehl ratio of 0.96±0.020.96 \pm 0.02 was attained within 2 to 4 iterations of the algorithm, confirming the applicability of the method for the fast and accurate calibration of adaptive optics systems under real experimental conditions.
Y. Rodimkov, A. Kotov, K. Burdonov +4
May 13, 2026physics.optics

DeepFilters: Scattering-Aware Pupil Engineering with Learned Digital Filter Reconstruction for Extended Depth of Field Microscopy

Extended depth of field microscopy encodes axial information into a single acquisition through engineered point spread functions, but conventional and deep optics approaches are subject to degradation in scattering tissue. We introduce DeepFilters, a scattering-aware deep optics framework that jointly optimizes a parameterized pupil filter and a digital-filter-based reconstruction network through a calibrated differentiable forward model to achieve broad generalization without retraining. Incorporating empirical scattering kernels, physics-guided regularization, and a hybrid genetic-gradient initialization strategy, DeepFilters extends the PSF from 16 micron to >400 micron in clear media and enables signal recovery beyond 120 micron deep in biological tissues, validated across fixed brain slices and sea urchin embryos.
Joseph L. Greene, Suet YIng Chan, Qilin Deng +8
May 4, 2026cs.DC

(POSTER) From Sensors to Insight: Rapid, Edge-to-Core Application Development for Sensor-Driven Applications

Scientists increasingly rely on sensor-based data; however transforming raw streams into insights across the edge-to-cloud continuum remains difficult due to the breadth of expertise required to coordinate the necessary data and computation flow. This paper introduces a pattern-based, AI-assisted methodology for rapid development of sensor-driven applications. Using Pegasus workflows executing on the FABRIC testbed, we demonstrate a 5-step development loop that shifts workflow construction and deployment from code-first to intent-first design. Starting from an existing Orcasound hydrophone workflow as a reusable template, we generate and refine workflows for air quality, earthquake, and soil moisture monitoring applications. We further show how these workflows extend to edge resources-including BlueField-3 DPUs and Raspberry Pis-through configuration and placement rather than workflow redesign. Our evaluation, from the perspective of a novice Pegasus user, shows that AI-assisted pattern reuse compresses multi-stage workflow development to 1-1.5 days per workflow while preserving the rigor and portability of workflow-based execution.
Komal Thareja, Anirban Mandal, Ewa Deelman