CacheMPC: Certified Cached Model Predictive Control for Quadruped Locomotion

This paper presents dynamics-relaxed model predictive control (DR-MPC), a novel MPC formulation for legged locomotion, and a tailored interior-point method (IPM) solver. The formulation combines online optimization feasibility by construction with a contact-aware input parameterization. DR-MPC moves the dynamics equality and affine input constraints into quadratic penalties and retains only nonempty box constraints. The resulting box-constrained quadratic program (QP) has a block-arrow Hessian that enables the state and affine-output directions to be eliminated through a Schur complement. The solver factors only the reduced control system after swing-force elimination and contact-aligned move blocking. For the evaluated implementations using the same DR-MPC formulation, our method achieves median end-to-end MPC speedups of $16.0\times$ over HPIPM and $4.4\times$ over OSQP, with comparable locomotion performance in simulation. DR-MPC achieves a median onboard MPC end-to-end time of $4.4$ ms and is validated on a Unitree Go1 quadruped. Open-source code will be made available after publication.

Model Predictive Control (MPC) delivers constraint-aware control, but its reliance on online optimization limits its use on systems with fast dynamics, high-dimensional models, or long horizons. Existing GPU implementations typically treat the device as a linear-algebra accelerator, leaving the optimization loop dependent on repeated kernel launches and high-latency memory transfers. This paper introduces CUDA MPC, a GPU-native MPC framework that co-designs the optimization algorithm, execution model, and memory architecture for CUDA hardware. CUDA MPC pairs a parallel-in-horizon alternating direction method of multipliers (ADMM) splitting with a fused CUDA kernel that runs the entire iterative solve on the device. Intermediate optimization variables stay in low-latency, on-chip shared memory, and a localized atomic-flag protocol synchronizes only adjacent horizon blocks, minimizing host intervention, kernel-dispatch overhead, and global-memory traffic. Across six nonlinear robotics benchmarks spanning increasing state dimension and constraint density, CUDA MPC sustains real-time rates at horizons one to two orders of magnitude longer than CPU solvers: it solves an optimization-based collision-avoidance parking problem with 100 s of lookahead within a 0.1 s sampling interval, and is the only solver evaluated that achieves both real-time execution and collision-free coordination for a centralized 10-agent swarm, where acados and CasADi return no feasible solution and require 3.5 s and 4.5 s per solve. Against tensor-framework implementations of the same ADMM splitting, the fused kernel is up to $965\times$ faster.

This paper presents a multi-phase whole-body model predictive control (MPC) approach for bipedal walking, combining a detailed whole-body model in the near horizon with a simplified single-rigid-body model in the later prediction steps. This reduces computational complexity while retaining prediction capabilities. The resulting nonlinear optimal control problem is solved entirely within the general-purpose, off-the-shelf nonlinear MPC framework acados, using sequential quadratic programming (SQP). Given a contact schedule and a target walking speed, the controller optimizes joint torques without depending on preselected footstep locations. The controller is validated in MuJoCo simulation on the 18-DoF bipedal robot HyPer-2.