Abstract
Rolling motion planning is challenging because rolling contact imposes nonholonomic constraints and the configuration evolves on a curved manifold. The problem becomes substantially harder in multi-contact settings, where multiple bodies roll without slip and the contact states are coupled. This paper presents a new framework for multi-contact path planning in spherical rolling robotics under no-slip constraints. We first derive a compact kinematic model for multi-sphere rolling using Montana's contact-coordinate formulation, where each contact is represented by a stacked five-state vector. Building on this model, we construct a Voronoi-based roadmap directly on the spherical contact manifold, incorporating spherical-cap obstacles and mutual-exclusion regions via on-manifold collision checking, and refine discrete graph paths using manifold-consistent log-exp smoothing. The resulting smoothed surface paths are then lifted to admissible multi-contact rolling motions through the derived Montana kinematics and validated via forward simulation. We further evaluate feasibility and path quality versus trajectory smoothness, Voronoi seed density, and computation time. The proposed framework provides a foundation for extending the method to non-spherical geometries, time-varying obstacle environments, and experimental validation on physical rolling robotic platforms.
Explore similar work
Jun 20, 2026cs.RO
This paper presents a full nonlinear constrained dynamic model of MonoRollBot, a novel 3-DoF spherical rolling robot driven by a single motor, a lead-screw transmission, and a spring-coupled internal moving mass, together with motion analysis of its behavior. To the best of our knowledge, this is one of the first full nonlinear nonholonomic models reported for a mono-actuated, super-underactuated spherical rolling robot of this kind. Because rolling without slipping is nonholonomic, the dynamics are derived using the Lagrange--d'Alembert formulation, with the lead-screw relation imposed as a holonomic constraint and the rolling condition imposed in Pfaffian form. The formulation retains the complete generalized coordinates of shell translation, shell attitude, screw travel, nut rotation, and radial mass motion. Simulations and representative motion studies show qualitative agreement with prototype behavior and reveal how gravity, compliance, and inertia jointly shape the locomotion and motion capabilities of this strongly underactuated robot. The resulting model also provides a mechanically consistent basis for future state estimation and hybrid controller design for this nonholonomic mono-actuated rolling robot.
Lakshmesha Krishnapa, Ahnaf Sharaar Mazahar, Seyed Amir Tafrishi
May 27, 2026cs.RO
We propose an optimization-based framework for robust contact-rich manipulation. Recent contact-implicit methods enable online hybrid planning across contact modes, allowing closed-loop manipulation for a given target state and contact location sequence of the robot and object. However, most existing approaches lack the ability to autonomously reason and generate diverse contact location sequences and manipulation trajectories, i.e., active contact location selection, which limits their applicability to relatively simple tasks. Active contact location selection is challenging due to complementarity in contact dynamics and the sparse gradients, making the design of a unified framework for contact selection and planning difficult. To address these challenges, we introduce Simultaneous Contact Selection and Planning (SCSP), a cascaded optimization framework comprising Contact Selection Optimization (CSO) and Contact Planning Optimization (CPO). CSO leverages a surrogate contact model and discrete-continuous optimization to efficiently resolve the nonsmoothness and coupling in contact selection, enabling online global searching of optimal contact locations. CPO performs prior-guided contact planning by evaluating the reference contact locations produced by CSO and generating corresponding manipulation trajectories in real time for redundant manipulators. Extensive simulations and real-world experiments demonstrate that SCSP produces diverse manipulation behaviors and robust control under inaccurate dynamics and perceptual noise. We further validate the generalization of the framework on challenging manipulation tasks. Project website: \href{https://sites.google.com/view/scsp-robot}{https://sites.google.com/view/scsp-robot}.
Zhe Zhang, Xingrong Diao, Haoxiang Liang +4
Apr 17, 2026cs.RO
Continuum robots are well suited for navigating confined and fragile environments, such as vascular or endoluminal anatomy, where contact with surrounding structures is often unavoidable. While controlled contact can assist motion, unfavorable contact can degrade controllability, induce kinematic singularities, or introduce safety risks. We present a contact-aware planning approach that evaluates contact quality, penalizing hazardous interactions, while permitting benign contact. The planner produces kinematically feasible trajectories and contact-aware Jacobians which can be used for closed-loop control in hardware experiments. We validate the approach by testing the integrated system (planning, control, and mechanical design) on anatomical models from patient scans. The planner generates effective plans for three common anatomical environments, and, in all hardware trials, the continuum robot was able to reach the target while avoiding dangerous tip contact (100% success). Mean tracking errors were 1.9 +/- 0.5 mm, 1.2 +/- 0.1 mm, and 1.7 +/- 0.2 mm across the three different environments. Ablation studies showed that penalizing end-of-continuum-segment (ECS) contact improved manipulability and prevented hardware failures. Overall, this work enables reliable, contact-aware navigation in highly constrained environments.
Aedan Mangan, Kehan Long, Ki Myung Brian Lee +3