Abstract
Improvements in the technical performance of human--robot interaction (HRI) systems do not automatically translate into differences that human users can detect during live interaction. This paper investigates whether a 15 percentage point gain in end-to-end task success (from 75% in a multimodal baseline system to 90% in an improved configuration identified through a prior ablation study) is sufficient to produce consistent and measurable differences in user perception. The baseline system combines Whisper for speech recognition, Florence-2 for open-vocabulary object detection, LLaMA 3.1 for action extraction, and an interval Type-2 fuzzy logic controller for motion execution. The improved configuration replaces the perception and language modules with Grounding DINO + SAM and Qwen 3.5 9B, respectively, while retaining the same controller. A within-subject user study with 24 participants compared both systems on the same tabletop object-grasping task. After interacting with each configuration, participants rated perceived speed, reliability, and overall competence and fluency on a 7-point Likert scale. Results show that 17 out of 24 participants (70.83%) preferred the improved system (exact binomial test, p = 0.043, h = 0.43), and all three perceptual constructs were rated significantly higher for the improved configuration after Holm correction, with large to very large effect sizes (p < 0.001). These findings confirm that the identified technical improvements are perceptible to users in direct interaction and underscore the importance of complementing benchmark evaluation with user-centred evidence when assessing robotic manipulation pipelines.
Explore similar work
May 1, 2026cs.RO
This manuscript extends our previous multimodal human-robot interaction system by introducing a controlled ablation study of the three modules that most strongly influence end-to-end performance: the large language model used for action extraction, the perception system used for visual grounding, and the controller used for motion execution. The goal is not to redesign the full pipeline, but to isolate the contribution of each component under a common experimental protocol and then evaluate the best combinations end-to-end. We therefore compare three language models, five perception configurations, and three controllers, followed by a second-stage factorial study over the best candidates. The resulting analysis is intended to clarify which choices primarily affect execution time, which primarily affect success rate, and where the largest engineering gains are likely to come from in future revisions of the system.
Zi Tian, Guanting Shen
Jun 19, 2026cs.RO
We present R2HandoverSim, a simulation benchmark for robot-to-human (R2H) object handovers. Although R2H handover methods have advanced rapidly, the lack of standardized evaluation protocols impedes objective comparison. Our benchmark enables reproducible evaluation by systematically comparing four baselines on their predicted shared grasp poses. We conduct a user study with 30 participants, analyze baseline performance, and show that simulation results correlate with real-world evaluation outcomes. Crucially, five complementary metrics (planning feasibility, reachability, grasp stability, grasp affordance, and safety) better reflect user-perceived handover quality than overall success rate alone. Website and code: https://robot-future.github.io/r2handoversim/.
Hanxin Zhang, Abdulqader Dhafer, Hongbiao Dong +1
Sep 3, 2026cs.RO
This paper presents an experimental design for constructing a multimodal dataset to analyze user engagement in human-robot interaction (HRI). Prior studies have mainly relied on observable behavioral cues, with limited frameworks integrating physiological signals. We therefore propose a structured data-collection protocol to build a multimodal dataset that includes wearable physiological signals, behavioral data, and self-report measures under different levels of task complexity defined in this experiment.
Buwan Kim, Wonse Jo