Abstract
We establish finite-sample closed-loop stability guarantees for Model Predictive Path Integral (MPPI) control applied to discrete-time Linear Time-Invariant (LTI) systems with additive Gaussian process disturbances. The key observation is that, for unconstrained LTI/quadratic systems with the DARE terminal cost, the exact finite-horizon MPC law has the same first control action as the infinite-horizon LQR law for every planning horizon. Thus, finite-sample MPPI can be analyzed as a stochastic perturbation of LQR. First, we show that the MPPI control law approximates the LQR feedback with high probability. The approximation error decomposes into a Monte Carlo term that decreases with the sample count and an infinite-sample temperature bias that persists at finite temperature but vanishes as the temperature is reduced. The resulting constants are written in terms of the horizon-dependent stacked cost matrices, making explicit that the finite-sample certificate is parametrized by the selected planning horizon. Second, we use a Lyapunov perturbation argument to prove practical exponential stability in expectation. On sample paths that remain in a compact Lyapunov sublevel set over a finite operating horizon, the expected state norm decays exponentially up to three residual floors: a process-noise floor, an MPPI approximation floor, and a confidence floor from the per-step sampling failure probability. The sufficient sample threshold is explicit and computable from the DARE solution, LQR stability margin, MPPI sampling parameters, temperature, and planning horizon. In the joint limit of infinite samples and vanishing temperature bias, the result recovers the stochastic LQR stability bound.
Explore similar work
Mar 31, 2026eess.SY
Classical proportional--integral--derivative (PID) control remains widely used in industrial control systems, while model predictive control (MPC) is actively studied to achieve higher performance for systems with nonlinear dynamics. Model predictive path integral (MPPI) control is a sampling-based MPC method that optimizes control inputs without gradient calculations and can handle non-differentiable models and objective functions. However, conventional MPPI directly samples control-input sequences, which can produce large temporal input increments and causes the optimization dimension to grow with the prediction horizon. This study proposes MPPI--PID control, which uses MPPI to optimize PID gains online instead of directly optimizing the control-input sequences. By replacing high-dimensional input-sequence optimization with low-dimensional gain-space optimization while retaining the PID structure, the proposed formulation improves sampling efficiency and promotes smoother control inputs. Theoretical analyses are provided for a unified path-integral update, the relation between optimization dimension and effective sample size, and the temporal correlation of input perturbations induced by the PID structure. The method is evaluated on a learning-based path following of a mini forklift using a residual-learning dynamics model that combines a physical model and a neural network identified from real-machine driving data. Numerical results show that MPPI--PID improves tracking performance over fixed-gain PID, yields smaller input increments than conventional MPPI, and maintains favorable performance under reduced sampling budgets.
Teruki Kato, Koshi Oishi, Seigo Ito
Jul 8, 2026eess.SY
Sampling-based model predictive control methods handle nonlinear dynamics and complex cost landscapes through Monte Carlo rollouts, yet typically employ fixed constraint penalties that do not adapt to model-plant mismatch. This paper proposes Residual-Conservative Model Predictive Path Integral Control (RC-MPPI), a sampling-based MPC framework that modulates safety conservatism online using the prediction-execution residual. RC-MPPI combines three coupled mechanisms: residual-dependent constraint tightening, adaptive safety-cost shaping, and residual-adaptive sampling modulation through exploration contraction and temperature relaxation. The temperature adaptation reflects a key insight: when the model is inaccurate, rollout cost evaluations become unreliable, and increasing temperature reduces overcommitment to apparent cost rankings. Under Lipschitz dynamics and sub-Gaussian disturbances, we derive probabilistic bounds on constraint violation and show that the joint effect of the adaptive mechanisms reduces violation probability as the residual grows. A rollout-cost uncertainty analysis further shows that model-plant mismatch perturbs MPPI importance weights in proportion to residual magnitude and inversely with temperature, providing theoretical justification for residual-adaptive temperature relaxation. Simulations on an LTI point-mass system and a planar 2R manipulator show improved safety margin, success rate, and control efficiency compared with vanilla MPPI under significant model-plant mismatch.
Hyung-Jin Yoon, Hunmin Kim
Jul 9, 2026eess.SY
We study Model Predictive Path Integral (MPPI) control for nonlinear systems with additive process disturbances whose covariance is unknown, spatially varying, and slowly time-varying. A mismatched disturbance covariance produces a persistent penalty in closed-loop stability certificates, while online estimation can reduce this penalty as data are collected. We propose a cell-wise recursive covariance estimator with spatial diffusion and prove a finite-horizon error bound that separates stochastic-approximation error, spatial-smoothing bias, and temporal-drift effects. The diffusion kernel is chosen to be reversible with respect to the stationary visitation measure, making the diffusion operator dissipative in the weighted Lyapunov analysis. We then substitute the resulting covariance estimate into the MPPI sampling distribution and derive an adaptive stability certificate with an explicit learning penalty. The main result is a payoff theorem: after a computable crossover time, the adaptive controller achieves a strictly tighter certified stability bound than any fixed covariance choice whose mismatch exceeds the residual smoothing and drift allowance. Numerical experiments illustrate the estimator convergence and the resulting stability-tightening effect.
Hyung-Jin Yoon, Hunmin Kim