High-level spatial Dubins airplane-based reference smoothing with low-level geometric tracking for quadrotor control

Many aerial tasks involving quadrotors demand both instant reactivity and long-horizon planning for obstacle avoidance, energy efficiency, or trajectory tracking. High-fidelity models enable accurate control but are too slow for long horizons. Low-fidelity planners scale but cannot directly control the system, necessitating cascaded architectures. Prevailing hierarchical approaches plan with a simplified model and use a high-fidelity controller for tracking, yet this decomposition is inherently suboptimal. The controller is limited by the coarse plan, and conventional MPC alternatives shorten the horizon to stay real-time feasible. We present UNIQUE, an MPC architecture that replaces this hierarchical stacking with temporal cascading. The planning problem is formulated as the second-tail horizon of a single multi-phase MPC, rather than being solved separately. We align costs across horizons, derive feasibility constraints for the point-mass planning model, and introduce transition constraints that convert high-fidelity states into meaningful low-fidelity states. Parallel point-mass and mixed-integer solvers address nonconvexities while incorporating progressive 3D obstacle smoothing over the planning horizon. In simulations and real flights, under equal computational budgets, UNIQUE improves closed-loop tracking by up to 75% compared with standard MPC and hierarchical baselines. Ablations and Pareto analyses confirm performance gains across variations in horizon, constraint approximations, and smoothing schedules.

Quadrotors flying in tight formations are severely affected by turbulent aerodynamic interactions, such as downwash, that can cause catastrophic collisions if left unmodeled. To compensate for these effects, we propose a physics-informed residual dynamics learning framework that captures complex aerodynamic interactions while ensuring the joint multi-quadrotor system remains differentially flat. We leverage this preserved flatness to design a computationally efficient feedback linearization controller that is easily tunable with linear control techniques and cancels aerodynamic disturbances via feedforward compensation. Hardware experiments demonstrate our framework reduces average tracking errors by 31% compared to nominal baselines. Crucially, our lightweight approach matches the tracking performance of state-of-the-art nonlinear model predictive control (NMPC) while requiring an order of magnitude less computation. We are the first to show that stable, tight formation flight can be achieved with under 30 seconds of training data and a 5ms loop rate, unlocking high-fidelity aerodynamic compensation for compute-constrained flight stacks.

Unmanned aerial vehicles (UAVs), particularly quadcopters, present unique challenges for autonomous control due to their underactuated dynamics: only four available control inputs must govern six degrees of freedom. This paper investigates a physics-aware, end-to-end deep reinforcement learning (DRL) approach that acts directly on low-level body inputs, total thrust and body torques $(T, τ_x, τ_y, τ_z)$, and closes the loop through a high-fidelity Simulink environment. Our simulator integrates a 12-state rigid-body model (MATLAB Level-2 S-Function) with (i) an Action2RPM allocation based on the Moore-Penrose pseudo-inverse of a coefficient matrix derived from thrust and drag terms, and (ii) first-order actuator dynamics for each motor (time constant $T_m = 0.076$ s), including rotor gyroscopic coupling. A shaped reward balances goal-reaching and stability using an exponential position well, attitude penalties, and quadratic velocity costs. Four DRL algorithms, DDPG, TD3, PPO, and SAC, are evaluated in two stages: (S1) thrust-only hover and (S2) hover with pitch torque and a translated goal. Results show that SAC and TD3 achieve superior stability and exploration efficiency, while PPO is less sample-efficient. The study highlights the significance of modeling actuator lags and aerodynamic moments for stable low-level control and provides a reproducible benchmark for quadcopter DRL.