Recent work in humanoid whole-body control has found success with a simple recipe: retarget human motion to robot kinematic references, then train policies via reinforcement learning (RL) to track them. But how does this recipe transfer to dexterous manipulation? The answer is not obvious, as manipulation involves complex, contact-rich dynamics and requires delicate regulation of contact modes and forces. We present REGRIND, a minimalist retargeting-guided RL pipeline that learns dexterous manipulation policies from a single human demonstration. REGRIND retargets human hand-object motion to a robot reference that preserves hand-object spatial and contact relationships, trains a residual RL policy in simulation to track object-centric keypoints along that reference, and transfers the resulting policy zero-shot to hardware with careful system identification. The resulting policies produce fluid, human-like behavior on two different multi-fingered hands across contact-rich tool-use tasks, including operating a pair of scissors and turning a screwdriver. Through systematic hardware experiments, we identify and analyze the key factors that govern sim-to-real transfer in dexterous manipulation, offering practical guidance for retargeting-based learning in contact-rich settings. Videos and code are available at https://yunhaifeng.com/REGRIND.
Human hand-object demonstrations provide dense reference motions for training dexterous manipulation reinforcement learning (RL) policies through reference tracking. However, to use such demonstrations for RL policy learning, retargeting must preserve hand pose and task-relevant hand-object contact structure. Otherwise, contact and feasibility artifacts can degrade downstream RL policy performance. We introduce TopoRetarget, an interaction-preserving retargeting framework that uses a single set of parameters across diverse retargeting conditions while maintaining task-relevant hand-object interaction and adapting human demonstrations to dexterous robot hands. The method constructs a sparse interaction graph over hand and object keypoints and optimizes distance-weighted Laplacian deformation with directional consistency, kinematic constraints, and penetration handling. Evaluations show that the generated references improve both interaction fidelity and policy learning: TopoRetarget achieves the best contact precision and alignment over all baselines on the ContactPose Dataset, improves Pen-Spin training success by 40.6 percentage points over the existing baseline methods, and enables zero-shot transfer to Wuji Hand hardware on cube reorientation and pen spinning.
Learning robot dexterous manipulation from human manipulation videos requires reliably retargeting human intent to executable robot actions while maintaining stable hand-object contact, which remains a key challenge in embodied intelligence. Existing retargeting methods often ignore explicit contact modeling or rely on reinforcement learning, resulting in limited accuracy and generalization. To address this, we propose ObjRetarget, a human-to-robot motion retargeting framework for learning robot dexterous manipulation from human videos, which integrates anthropomorphic arm trajectory constraints with structured hand-object geometric modeling. For arm motion, reference trajectories extracted from human videos are used for initialization, followed by anthropomorphic constraints and redundancy-aware optimization to generate natural and accurate movements. For hand manipulation, ObjRetarget represents multi-finger contacts using polytope clusters and preserves contact structure through geometric invariants to improve stability. Experiments on real robots show that ObjRetarget improves manipulation success rates and contact stability across multiple dexterous tasks, and generalizes well to different demonstrations, object poses, and task settings.
Human-like dexterous hands with multiple fingers offer human-level manipulation capabilities but remain difficult to train the control policies that can deploy on real hardware due to contact-rich physics and imperfect actuation. We present a sim-to-real reinforcement learning method that leverages dense tactile feedback combined with joint torque sensing to explicitly regulate physical interactions. To enable effective sim-to-real transfer, we introduce (i) a computationally fast tactile simulation that computes distances between dense virtual tactile units and the object via parallel forward kinematics, providing high-rate, high-resolution touch signals needed by RL; (ii) a current-to-torque calibration that eliminates the need for torque sensors on dexterous hands by mapping motor current to joint torque; and (iii) actuator dynamics modeling with randomization to account for non-ideal torque-speed effects and bridge the actuation gaps. Using an asymmetric actor-critic PPO pipeline, we train policies entirely in simulation and deploy them directly to a five-finger hand. The resulting policies demonstrate two essential human-hand skills: (1) command-based controllable grasp force tracking and (2) reorientation of objects in the hand, both of which are robustly executed without fine-tuning on the robot. By combining tactile and torque in the observation space with scalable sensing and actuation modeling, our system provides a practical solution to achieve reliable dexterous manipulation. To our knowledge, this is the first demonstration of controllable grasping on a multi-finger dexterous hand trained entirely in simulation and transferred zero-shot on real hardware.