Abstract
Fully actuated unmanned aerial vehicles (UAVs) are usually certified through rank conditions on a control-allocation matrix or through free-flight tracking performance. For aerial physical interaction, this certification may be incomplete. During sustained contact, part of the available wrench is consumed by the interaction task, and only the residual wrench remains available for stabilization, disturbance rejection, and maneuvering. This paper introduces a control-theoretic framework for \emph{contact-persistent full actuation}. A rigid-body model on R3×\SO(3) is combined with a morphology-dependent wrench map that captures fixed-tilt, variable-tilt, coaxial, and overactuated multirotor architectures. We define feasible wrench sets under actuator limits, residual wrench sets under task loading, and residual authority margins that strengthen the usual rank-based notion of full actuation. The main result shows that contact-persistent full actuation is equivalent to interiority of the task wrench in the constrained feasible wrench polytope, and that the residual authority radius is exactly the distance to the polytope boundary. We further introduce a signed residual-margin certificate for infeasible and boundary cases, a slack-maximizing allocation certificate, and a robust implementability condition that can be used as a margin-aware safety filter. Numerical evaluation on an abstract tilted hexarotor shows that full row rank alone does not imply feasible contact operation. Intermediate tilt angles preserve residual authority during pushing, whereas small or excessive tilts fail because of lateral-force deficiency or hover-margin loss.
Explore similar work
Jul 5, 2026cs.RO
Aerial physical interaction represents a promising direction for next-generation unmanned aerial vehicles (UAVs), but it requires an aerial platform that can exert contact forces while maintaining stable flight. For close-proximity tasks, this translates into three coupled design requirements: multidimensional wrench generation for stable contact, compactness for maneuverability and safety in confined spaces, and reduced lateral airflow toward the target when generating horizontal force. This article presents FLOAT Drone, a fully actuated coaxial UAV with servo-driven control surfaces for close-proximity physical interaction. The coaxial dual-rotor layout provides a compact propulsion layout, while the control surfaces, immersed in the rotor downwash, generate lateral forces and moments for 6-DoF wrench generation. A force-matched computational fluid dynamics (CFD) comparison with a tilted-rotor alternative quantifies the reduction in target-facing lateral airflow. To account for nonlinear rotor--control-surface coupling in the rotor wake, a high-fidelity polynomial aerodynamic wrench model is identified from precision force measurements and embedded in a constrained nonlinear allocator for real-time wrench tracking. Comparative flight and interaction experiments show that the proposed framework improves control accuracy over linear allocation baselines, rejects ground-effect and payload disturbances, and enables close-proximity drawer push--pull manipulation through a
2 cm handle clearance.
Junxiao Lin, Kehan Zhou, Shuhang Ji +4
Aug 3, 2026cs.RO
Maintaining a stable pose during physical interaction is a significant challenge for aerial robots, often limiting their use in contact-based tasks. This paper presents a novel uncrewed aerial vehicle (UAV) platform designed to transition from unconstrained flight to a stable, constrained work platform via environmental anchoring. Our system comprises: 1) a multirotor with a tilt-rotor mechanism that decouples pitch from forward motion, enabling stable hover at non-zero pitch angles, and 2) a novel underactuated, cable-driven, prismatic gripper featuring compliance to adapt to irregular geometries, designed to stabilize the UAV by anchoring it to its environment. We present the design and prototyping of the complete system and validate its performance through a series of real-robot flight tests. Results demonstrate that anchoring significantly improves stability for interaction tasks, reducing positional drift RMSE by over 95% compared to a free-flight baseline, even under windy conditions. The anchored system can withstand longitudinal reaction forces up to 75N while maintaining a stable pose. Furthermore, across a range of target geometries and orientations, the system demonstrated consistent stability with a positional drift RMSE that never exceeded 3mm. These results establish the viability of our approach for complex physical interaction tasks, such as sampling tree health by drilling or sensor installation in hard-to-reach locations. Watch our UAV at: https://youtu.be/HDQ8S4ZW3Ls
Joshua Taylor, Nursultan Imanberdiyev, Wei-Yun Yau +2
Sep 11, 2026cs.RO
We present a robust contact-aware control framework for aerial writing on an underactuated platform. The framework combines nonlinear model predictive control (NMPC) for accurate end-effector position and normal-force tracking at small reference penetration depths, with consistent performance across controller tunings, with whole-body incremental nonlinear dynamic inversion (INDI) for robustness to frictional and aerodynamic disturbances during contact. The proposed controllers are validated on a quadrotor-based aerial manipulator with a rigid, single-link, one-degree-of-freedom (DoF) arm in simulation and real-world experiments. The aerial writing experiments span vertical and inclined surfaces, multiple reference forces, different friction conditions, and wind disturbances. The results demonstrate that robust simultaneous five-DoF end-effector pose and contact-force tracking is achievable on a standard underactuated quadrotor with a simple, rigid, single-link arm, without requiring a fully actuated platform, a complex arm, or dedicated force/torque sensing.
Darwin Liu, Tamas Keviczky, Sihao Sun