Abstract
The paper proposes a robot-agnostic compliant-control framework that extends the ROS control ecosystem with standardized joint and Cartesian command interfaces. It addresses a key limitation of existing control software: no reusable infrastructure for implementing compliant-control algorithms across different manipulators while preserving a common interface to higher-level applications. A plugin-based architecture separates controller infrastructure from control-law implementation. Generic wrappers use existing hardware abstractions to interface with different manipulators, while runtime-loaded plugins implement only the control law. Command interfaces support joint- and Cartesian-space references, stiffness and damping gains, nullspace targets, and feedforward terms, enabling variable impedance and diverse compliant-control formulations. Robot kinematics and dynamics are computed from URDF models using Pinocchio. The architecture facilitates the development of compliant-control strategies and enables the same implementation to be deployed across platforms unchanged. The complete framework, including reference controllers, high-level task interfaces, and example configurations for various manipulators, is open-sourced. The reference Cartesian impedance controller supports task-dependent compliance by rotating translational and rotational stiffness and damping, allowing the principal compliance directions to be updated online according to local task geometry rather than remaining fixed in the robot base or TCP frame. This is particularly important in contact-rich manipulation, where the desired directions of motion, constraints, and compliance directions may vary throughout task execution. Real-robot experiments demonstrate task-dependent compliance in contact-rich manipulation, while simulations show portability across manipulators with distinct kinematic and dynamic characteristics.
Explore similar work
Aug 6, 2026cs.RO
Contact-rich manipulation requires precise tracking and mechanical compliance, where variable impedance control can improve robustness in task success, whereas static compliance cannot adapt to varying contact constraints. Variable impedance skills can be learned from demonstrations, avoiding complex modeling, but compliance is a hidden variable in force-agnostic kinematic data. While existing methods infer compliance from trajectory variations, these variations may reflect geometric adaptation and not intentional compliance when subject to changing spatial layouts. Therefore, this letter introduces Variable Impedance Diffusion Policy (VIDP), an imitation learning-based variable impedance control framework leveraging a Task-Parameterized Directionality-Aware Mixture Model (TP-DAMM) to extract physically consistent trajectory distributions from diverse demonstrations. By mapping distributions to stiffness profiles, VIDP jointly predicts pose actions and task compliance without force sensors. Real-world experiments show that VIDP significantly outperforms fixed-impedance baselines in task success rate while reducing interaction forces with respect to high stiffness controllers and tracking errors with respect to low stiffness baselines.
Hisham Khalil, Neil Fernandes, Thomas M. Kwok +2
Jul 23, 2026cs.RO
Learning-based manipulation policies usually predict robot actions from sensory observations and leave their execution to a separate low-level controller. In rigid contact, this separation can be problematic: the same motion to a virtual target or compliant motion command can lead to unstable contact, tracking error, excessive loading, or tool damage, depending on the low-level controller. In this paper, we propose a \textit{Unified Robot Control-Policy Framework} (URF), which connects compliant action prediction with unified impedance-admittance control. Given multimodal observations, URF predicts a virtual target, a stiffness matrix, and an impedance-admittance switch ratio. The switch ratio determines when the controller should behave more like admittance control for accurate motion tracking and when it should move toward impedance control for safer rigid contact. Because demonstration data do not provide ground-truth environment stiffness, we construct switch-ratio labels from measured contact forces and use them to supervise controller-mode prediction. Across box-flipping and line-pressing tasks, URF achieves higher task success rates while reducing failure modes observed with admittance-only execution, including rapid force buildup, large force oscillations, tool breakage, and robot safety stops. These results suggest that contact-aware policies benefit from predicting not only compliant actions but also the controller behavior used to execute them. Project page: https://jiyou384.github.io/urf_project_page/
Jiyou Shin, Youngjin Seo, Jaeseog Won +5
Sep 20, 2026cs.RO
Contact-rich manipulation, requiring robots to regulate not only motion but also how they yield to external forces, has emerged as the next frontier for Vision-Language-Action (VLA) models. However, existing VLAs output purely kinematic commands, degrading performance on real-world contact-rich tasks. In this paper, we introduce CompVLA, a unified VLA framework that jointly predicts motion and stiffness matrix from RGB and language inputs. Our approach augments the conventional architecture with a dedicated Compliance Expert, which outputs time-varying stiffness and virtual displacement profiles executed via geometric impedance control. We demonstrate that CompVLA achieves the highest average success rate across diverse contact-rich tasks, outperforming both vanilla and compliance-aware VLA baselines, with ablations confirming each component is essential.
Jongmin Kim, Junsu Ha, Che-Sang Park +5