As autonomous drone deployments scale from individual units to coordinated swarms, the human operator's role shifts from direct piloting to high-level supervision. Current interfaces often treat multi-drone control as a scaled-up version of single-drone operation. We instead investigate how reframing fleet supervision as spatial interaction can better support the spatial, temporal, and safety demands of complex missions. We present FleetScape, a Mixed Reality (MR) sandtable system that externalizes layered real-time mission, safety, and environmental data while enabling fluid transitions between manual intervention and autonomous supervision. We developed a high-fidelity building inspection simulation that generates and streams synchronized multi-drone and environmental data for MR visualizations. We used this prototype to conduct a user study with six experienced drone pilots managing fleets of up to 15 drones. Our findings show that FleetScape supports situational awareness through layered spatial representations and clarifies control mode transitions. However, a limit to situational awareness was observed as fleet size increases, leading to different supervisory strategies. Finally, we derive design implications for supporting scalable drone fleet supervision.
Autonomous drone swarms in space-constrained environments such as warehouses, inspection corridors, and urban delivery routes must share limited airspace safely at high vehicle density. Existing approaches rely on fixed safety zones sized for worst-case velocity, which wastes airspace in congested scenarios. We replace the fixed radius with an adaptive, speed-dependent safety sphere whose size scales with braking distance: tight at low speeds, expanded at high speeds. We develop both a centralized model predictive control (MPC) formulation and a distributed MPC (DMPC) in which each drone optimizes locally from detected neighbors, accommodating mixed fleets with non-cooperative agents. We prove feasibility up to the geometric packing limit evaluated at the minimum radius, establish Lyapunov stability under sufficient conditions on the adaptation parameter, drone density, and prediction horizon, and extend these guarantees to the distributed setting via a contraction condition that preserves the centralized stability margins. We further derive modified sphere-packing capacity bounds and a throughput-optimal crossing speed for narrow passages. Simulations confirm that the adaptive framework remains feasible where fixed-radius methods fail: it roughly doubles the admissible drone count, reduces traversal time through constrained passages by about 25 percent, and enables passage through openings impassable to static safety zones. The centralized variant realizes a larger fraction of the theoretical capacity, while the distributed variant offers a more realistic deployment model for mixed-fleet operations under the same safety guarantees.
While autonomous multi-robots can achieve safe and coordinated navigation, they often struggle to adapt to unforeseen conditions and to capture operator-driven objectives in unstructured environments. We present a Virtual Reality (VR)-based shared control framework for teams of drones operating in constrained and unknown environments, enabling real-time, user-guided exploration. At the core of our approach is a novel, user-guided motion-primitive-based planner that computes continuous, collision-free trajectories while continuously integrating operator input. This planner is coupled with an admittance controller, allowing the operator to flexibly influence team behavior and guide drones toward regions of interest that autonomous planners may overlook. The system supports mixed-reality operations with both physical and simulated drones, and implements a bilateral VR-based interface, allowing the operator to guide the robot team via migration points while receiving immediate visual feedback of the team state. Experimental results show that shared control improves obstacle avoidance, maintains inter-agent spacing, and reduces operator effort, demonstrating the feasibility and advantages of immersive, human-in-the-loop multi-robot navigation.
Offshore maintenance requires operations in the air, the surface, and the subsea domain and include human supervision. This paper presents LOTUSim-Energy, a real-time maritime simulator designed for multi-domain human--drone interaction for offshore operation and maintenance. The plat- form unifies heterogeneous unmanned vehicles (Unmanned Aerial Vehicles: UAVs, Unmanned Surface Vehicles: USVs, Autonomous Underwater Vehicles: AUVs, Remotely Operated Vehicles: ROVs) within a distributed architecture coupling environment forcing (wind, waves, currents) and provides immersive user interfaces for supervision (desktop and virtual reality). A structured offshore task library enables repeatable evaluation of autonomy stacks under realistic metocean disturbances. The simulator supports realistic physics, energy-aware battery modeling, and fault-detection pipelines as modular validation tools. System-level performance is demonstrated on a multi-domain inspection scenario for monopile and transition piece structure, where we evaluate the reliability of integrated waypoint-follower plugin and Automatic Identification System (AIS)-referenced trajectory tracking under real-time energy monitoring. By combining unified environmental physics, heterogeneous vehicle simulation, and immersive supervision, LOTUSim-Energy provides an integration testbed for prototyping and rehearsing offshore human--robot collaboration workflows, as a step toward de-risking sea deployment.
Juliette Grosset, Marie Dubromel, Hélène Lechêne +2