Abstract
The demand for humanoid loco-manipulation tasks with an object has recently increased, and most existing control approaches for stability in such tasks rely on heuristics or machine-learning techniques. This study rigorously analyzes and exploits the dynamic effects of the object mass on balance stability. By formulating the object mass parameters in the whole-body dynamics with distributed contact wrenches and centers of pressure at the stance contacts, their nonlinear effects on the system momenta and constraints are quantified. The dynamic models and constraints are incorporated into the construction of the balanced state basin/boundary (BSB), a partition of the center-of-mass state space for a biped system to maintain balance in its desired contacts. The implications of the BSB for prediction and control are highlighted using a humanoid robot and an analytically tractable reduced-order mechanism. The BSBs under different conditions of base of support, actuation capacity, and pose provide systematic analyses of the effects of object mass on the balancing capability of a system. In particular, the trade-off relationships between momentum regulation and limiting factors in balancing are characterized, introducing two key quantities of the object: the critical mass, at which the system's balancing capability is maximum, and the transition mass, which activates different limiting factors. In addition, sufficient conditions for imposing balanced states on a trajectory are established and implemented with BSBs as explicit threshold constraints in the whole-body trajectory optimization for stable object-lifting control of the humanoid, demonstrating the lift-and-hold and lift-and-release tasks with distinct mass properties in simulations and experiments.
Explore similar work
Sep 16, 2026cs.RO
Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.
Zhongyu Chen, Yuxuan Nai, Qian Chen +8
Sep 14, 2026cs.RO
Estimating the 3D center of mass of unknown objects is challenging when grasping is infeasible, geometry is irregular, or mass distribution is uneven. We present a force-based method that estimates CoM height and mass from a single sub-critical tipping experiment by a robot manipulator. The robot applies a quasistatic elevated push and retract motion, using force-angle measurements recorded during tipping to identify parameters from the object trajectory. Our proposed push-retract cycle mitigates frictional bias, enabling generalized fitting. We experimentally validate our method using a robot manipulator with a six-axis force torque sensor on varying types of objects without prior shape information and without specific models. We also propose a method to prevent toppling, keeping the object in a sub-critical tipping regime by leveraging a safety margin. In experimental studies, our method recovers mass, CoM height, and toppling angle with relative errors below 5.0 percent across all unknown objects. This work demonstrates reliable 3D inertial parameter estimation under proper safety thresholds in tipping. Our proposed method informs and enables reliable non-prehensile manipulation and robotic grasping of challenging objects that were previously infeasible.
Steven M. Hyland, Jing Xiao, Cagdas D. Onal
May 2, 2026cs.RO
The ability to push large objects in a goal-directed manner using onboard egocentric perception is an essential skill for humanoid robots to perform complex tasks such as material handling in warehouses. To robustly manipulate heavy objects to arbitrary goal configurations, the robot must cope with unknown object mass and ground friction, noisy onboard perception, and actuation errors; all in a real-time feedback loop. Existing solutions either rely on privileged object-state information without onboard perception or lack robustness to variations in goal configurations and object physical properties. In this work, we present VOFA, a visual goal-conditioned humanoid loco-manipulation system capable of pushing objects with unknown physical properties to arbitrary goal positions. VOFA consists of a two-level hierarchical architecture with a high-level visuomotor policy and a low-level force-adaptive whole-body controller. The high-level policy processes noisy onboard observations and generates goal-conditioned commands to operate in closed loop across diverse object-goal configurations, while the low-level whole-body controller provides robustness to variations in object physical properties. VOFA is extensively evaluated in both simulation and real-world experiments on the Booster T1 humanoid robot. Our results demonstrate strong performance, achieving over 90% success in simulation and over 80% success in real-world trials. Moreover, VOFA successfully pushes objects weighing up to 17kg, exceeding half of the Booster T1's body weight.
Zichao Hu, Zifan Xu, Dongsik Chang +6