Disentangling Visuo-Tactile Foresight: Oracle-Guided Interface Discovery for World Action Models
Authors: Zihang Yao, Chaoyue Ding, Yingying Yu
Organizations: Brigham Young University · Brigham Young University, Provo, Utah, USA · Beijing Academy of Science and Technology · Beijing Academy of Science and Technology, Beijing, China
Abstract
Contact-rich manipulation remains challenging because successful control depends on physical interaction cues that are often weakly observable from vision alone. Recent tactile world action models jointly model future visual observations and tactile signals to guide action generation, but how such futures should be structured for effective use by the action expert remains underexplored. Directly studying this question with learned world action models is difficult because end-to-end behavior entangles physically invalid visual futures, unreliable predictions, inaccurate or cross-modally inconsistent tactile forecasts, and an unreadable future-to-action interface. To make this interface independently studyable, we introduce Oracle Visuo-Tactile Foresight (OVTF), a controlled framework that supplies paired RGB and tactile futures from successful trajectories verified in simulation. By fixing the future provider, OVTF isolates the interface and asks a cleaner question: if the future is successful and physically executable, what representation allows the action expert to absorb its benefit? Within OVTF, we propose Asymmetric Phase-Local Future Memory (AFM), in which visual memory reads future vision, each tactile memory jointly attends to its own tactile stream and phase-aligned future vision, and cross-tactile access is blocked. We compare AFM with Modality-Isolated Future Memory (IFM), which removes visual-to-tactile access and processes each future modality independently. Across seven tasks on the UniVTAC simulation benchmark, AFM achieves 32.0% average success, compared with 23.7% for IFM and 14.9% for UniVTAC-ACT. This controlled comparison shows that selective phase-aligned visual-tactile routing provides a more actionable future-to-action bridge than complete modality isolation.
World Action Models (WAMs) combine future-state prediction with robot action generation, but existing approaches largely rely on visual futures. Visual prediction captures scene structure and object motion, yet provides limited supervision for force, deformation, shear, and slip during contact-rich manipulation. This creates two design requirements: tactile futures should carry meaningful physical information, and they should not become privileged cues for action generation. We present TacWAM, a mechanics-aware tactile WAM that addresses this challenge in three steps. First, a Spatially Aligned Fusion (SAF) Tactile Encoder maps tactile appearance, dense force fields, and deformation flow into a shared latent prediction space, with bilateral force and torque reconstruction preserving global contact information. Second, a tactile history encoder provides temporal context so future tactile prediction reflects how force and deformation change beyond the current tactile observation. Third, Anchor-Guided Tri-Modal (AGT) Attention separates current visual and tactile anchors, future prediction tokens, and action tokens, allowing future tactile states to supervise training without being directly read by the action branch. We evaluate TacWAM on four real-world contact-rich manipulation tasks covering fragile grasping, sustained surface contact, and dynamic in-hand manipulation. TacWAM achieves an average success rate of 75.0%, exceeding the strongest evaluated baseline by 37.5 percentage points. Staged ablations show consistent degradation when tactile history is removed and access to future prediction targets is relaxed. These results indicate that future tactile supervision can improve contact-aware action learning when combined with informative tactile representations and deployment-consistent information constraints.
World action models inherit the predictive capability of world models, enabling action generation to be guided by anticipated future observations. However, they rely primarily on vision and often fail in contact-rich manipulation, where critical cues arise from physical interaction. In this paper, we propose Dream-Tac, a unified Tactile-World Action Model that jointly models actions, future visual observations, and tactile dynamics. Specifically, Dream-Tac introduces (i) contact-gated visuotactile fusion to selectively integrate tactile signals and (ii) a contact-aware attention bias to better regulate cross-modal interactions during manipulation. To support real-time deployment, we further design a dual-level acceleration strategy, reformulating the contact-aware bias to preserve the fused attention path during training and introducing cache-based diffusion acceleration at inference, achieving up to 2.9× faster training and 1.8× faster inference. Across six contact-rich manipulation tasks, Dream-Tac improves action accuracy by 31.7% on average, demonstrating the effectiveness of unified visuotactile world modeling.Code is available at https://github.com/LYFCLOUDFAN/Dream-Tac.
Contact-rich manipulation requires policies to react to local deformation, pressure, slip, and friction, yet these cues are temporally sparse and often invisible in visual observations. Existing visual-tactile policies usually feed tactile observations directly into action prediction, but rarely model tactile deformation dynamics during action generation. In this paper, we introduce VT-WAM, a Visual-Tactile World Action Model that jointly learns future visual prediction, tactile deformation prediction, and action prediction within a unified flow matching framework. In particular, VT-WAM introduces (1) Asymmetric Mixture-of-Transformers (MoT) attention to bridge a first-frame visual anchor with temporal tactile dynamics, and (2) contact-gated Action-Visual-Tactile Attention Guidance (AVTAG) to encourage action queries to rely on tactile evidence during contact phases. Across six real-world contact-rich manipulation tasks, VT-WAM achieves a 71.67% average success rate, outperforming Fast-WAM by 26.67% and OmniVTLA by 35.84%. Ablations demonstrate that modeling tactile deformation dynamics and guiding contact-phase tactile attention are both important for contact-rich tasks. Project website: https://vt-wam.github.io/.