Electroaerodynamic propulsion is compelling for use in micro air vehicles due to its silent and solid-state nature, but its limited efficiency has thus far precluded a path towards power-autonomous flight. Recent work has shown that thrust density and efficiency for small-scale atmospheric ion thrusters can be vastly increased when operating close to a ground plane. Here, we explore the design space of centimeter-scale hovercraft, which can leverage this ground effect for low-altitude flight. We first perform an empirical investigation, characterizing the performance benefits and trade-offs for different geometries and configurations of passive hovercraft skirts, then use the results to fabricate a viable point design. We demonstrate a palm-sized hovercraft that, while tethered to an external power source, can fly for extended periods, withstand dozens of takeoff and landing cycles, passively stabilize to reject significant mechanical disturbances, and generate practically zero audible noise signature. The measured thrust efficiency of 16 mN/W and additional payload capacity of almost 1.5 grams above the vehicle's self mass of about 1.6 grams exceeds any similarly sized electroaerodynamically propelled robot by an order of magnitude. This is the first time an ion-propelled micro hovercraft has been shown in the open literature, and our work points the way towards an entirely new class of robot.
Small rotorcraft intended for use indoors or around the built environment have extremely limited flight duration. This paper presents the design and experimental characterization of a custom shroud system that transforms a Crazyflie 2.1 micro air vehicle into a multi-modal robot capable of operating as a high-efficiency hovercraft or a free-flying drone. A custom experimental platform was developed for precise control of hover height and rotor duty cycle, and automated data logging of lift forces. Parametric testing of duct, intake, and nozzle geometries was performed to investigate the impact of shroud configuration on in-ground-effect and free-flight performance. An empirical model is developed which, unlike typical models for ground effect in rotorcraft, captures the suckdown effect that reduces force at intermediate height. It is shown that, through proper design of the shroud, beneficial ground effects can be increased while diminishing negative effects both close to the ground and in free flight. An optimized configuration exhibited nearly three times higher in-ground-effect force while maintaining comparable out-of-ground-effect aerodynamic thrust, although the added shroud mass reduces free-flight control authority. Lightweight shrouds are manufactured using thin-film thermoformed components, and total single-charge flight time is shown to increase by 60% in-ground-effect while decreasing by only 30% in free-flight as compared to the stock drone. Finally, controlled flight in the air, hovering close to the ground, and hover-to-flight transitions are demonstrated using a simple mode-switching controller, with tracking errors reported to quantify performance. This work provides an experimentally-validated and easily adoptable foundation for future research into lightweight ground-effect vehicles and hybrid drone-hovercraft systems.
We present a novel and minimalistic design of an aerial-terrestrial robot DASH: Ducted Aerial Spring Hopper. The goal is to enable both aerial and ground locomotion capabilities on a unified mobile robot that is mechanically-minimalistic, locomotion-versatile, and energy-efficient. We propose an organic integration of ducted fan co-axial body with a springy leg at the bottom for realization. The ducted fan module provides thrust-vectoring as the main actuation for agile flying; when it is combined with the light-weight spring leg, the robot realizes highly efficient ground hopping with energy circulation. Moreover, to realize optimal locomotion with two modes, we employ a contact-implicit model predictive controller to automatically choose locomotion modes and actuation. We successfully validated the design and control of DASH through a range of tasks, including periodic hopping, aerial flight, and mode-free locomotion with autonomous mode transitions during obstacle traversal.
Efficient flapping propulsion hinges on operating within a narrow Strouhal number window, a principle nature has converged upon for maximum thrust-to-power ratio. We translate this bioinspired empirical rule into real-time control, demonstrating it on an autonomous underwater vehicle driven by four soft fins. The proposed Strouhal-aware Model Predictive Control (MPC) enhances a quasi-steady hydrodynamic model with an explicit penalty for Strouhal deviation, solving the resulting nonconvex problem via a two-stage sampling and gradient optimization that runs onboard at 25 Hz. Pool and field trials show that the controller keeps each fin within the optimal Strouhal corridor (0.25-0.35) while precisely tracking commanded forces. This results in a mean reduction in mechanical power of 8.8% to 32% throughout the cruising range of 0.1 to 0.3 m/s. The proposed method also allows for a velocity of 0.4 m/s, which is unattainable for a baseline of the conventional inverse model. The results confirm that embedding first-principle flow physics into an MPC objective yields tangible endurance gains without sacrificing agility, offering a generic pathway to energy-aware locomotion in next-generation multifin robots.