Hybrid ML for Lightweight Pre-Route Delay Estimation in Open-Source IC Design

Integrated circuit design involves multiple design stages: logic synthesis, floorplanning, placement, and routing, with each stage taking hours to weeks to complete. Discovering timing violations late in this flow forces costly iterations back to earlier stages, wasting computational resources and delaying product launches. While predicting post-routing timing from early-stage data could prevent these failures, existing machine learning approaches struggle with the massive abstraction gap between post-synthesis logical descriptions and post-routing physical layouts. We propose STEP-KD (Sequential Timing Evaluation via Progressive Knowledge Distillation), which leverages intermediate design stages as ``stepping stones'' for progressive knowledge transfer rather than attempting direct prediction. STEP-KD trains teacher models at the post-routing, post-placement, and post-floorplan stages, then sequentially distills their knowledge to a post-synthesis student model through representation alignment. Experiments on diverse circuits demonstrate that STEP-KD reduces timing prediction error compared to direct distillation and supervised baselines, and in most settings compared to the industry-standard Static Timing Analysis (STA) tool. STEP-KD reduces the weighted mean absolute percentage error of Total Negative Slack prediction to 19.78%, compared with 74.84% for STA. Our proposed method is step forward to identify timing problems earlier, avoiding expensive late-stage redesigns.

Early, tool-free prediction of post-synthesis timing remains a key obstacle to rapid RTL iteration. We introduce TimingLLM, a two-stage retrieval-augmented LLM pipeline that estimates worst negative slack (WNS) and total negative slack (TNS) directly from Verilog. Stage 1 is a fine-tuned LLM that acts as a compact post-synthesis timing oracle, producing path-level arrivals/required times that are summarized into lightweight structural-timing cues (e.g., bag-of-gates counts, critical-path depth, gate-type patterns). Stage 2 is an LLM-based regressor that predicts WNS/TNS and applies a learned diagonal steering vector at the last transformer block, computed from the k nearest timing-labeled modules in a disjoint retrieval bank. On VerilogEval, TimingLLM attains R_WNS = 0.91 (MAPE 12%) and R_TNS=0.97 (MAPE 16%) while running 1.3-1.6 times faster than prior methods. Training uses a new 60k-module Verilog corpus with synthesis reports, which we will release. After training once, TimingLLM can be adapted to new technology libraries and PVT corners by refitting only a small regression head on 1000 labeled modules per setting, consistently outperforming state-of-the-art baselines.

Accurate timing prediction at the register-transfer level (RTL) is a longstanding challenge in design automation. Existing graph-based methods struggle with limited receptive fields, high complexity, and a lack of signal directionality. We present RTL-Sequencer, a novel sequence-based paradigm that enables scalable RTL timing prediction via linearizing logic cones by breadth-first traversal and applying modern linear sequence models. Furthermore, sequence models are customized by four synergistic techniques, including sequence shuffling, bidirectional modeling, differentiable modeling, and a hybrid graph-sequence architecture. Extensive experiments demonstrate significant improvements of RTL-Sequencer over state-of-the-art baselines, advancing early-stage timing optimization.