Multi-Objective Optimization Under Uncertainty of Part Quality in Fused Filament Fabrication

This paper develops a computational framework to optimize the process parameters such that the bond quality between extruded polymer filaments is maximized in fused filament fabrication (FFF). A transient heat transfer analysis providing an estimate of the temperature profile of the filaments is coupled with a sintering neck growth model to assess the bond quality that occurs at the interfaces between adjacent filaments. Predicting the variability in the FFF process is essential for achieving proactive quality control of the manufactured part; however, the models used to predict the variability are affected by assumptions and approximations. This paper systematically quantifies the uncertainty in the bond quality model prediction due to various sources of uncertainty, both aleatory and epistemic, and includes the uncertainty and the model discrepancy in the process parameter optimization. Variance-based sensitivity analysis based on Sobol indices is used to quantify the relative contributions of the different uncertainty sources to the uncertainty in the bond quality. A Gaussian process (GP) surrogate model is constructed to compute and include the model discrepancy within the optimization. Physical experiments are conducted for calibration and validation of the physics model and also for validation of the optimum solution. The results show that the proposed formulation for process parameter optimization under uncertainty results in high bond quality between adjoining filaments of the FFF product.

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

A geometry-conditioned, neuro-symbolic closed-loop architecture is proposed for laser powder bed fusion, in which a standards-aligned ontology operates inside the control loop and couples symbolic reasoning with statistical learning to set the targets of a constraint-aware predictive controller. The ontology links the process objectives and constraints to the signals a controller can observe, and a description-logic reasoner converts them into the references and bounds enforced on each scan. The demonstrated case is overhang dross, a quality limit on the melt pool depth, which governs quality yet cannot be measured during the build, is mapped through a geometry- and power-dependent depth-to-width ratio onto a bound on the observable width, with the ratio and its calibrated uncertainty supplied by a Gaussian process. The reasoner classifies each upcoming feature and selects the active constraints-adding a lack-of-fusion floor at overhangs, a monotone guard beyond the calibrated range, and an energy-density cap where a process window is declared while running only on changes of geometric context and otherwise leaving a single small quadratic program on the per-scan path. In an Eagar-Tsai surrogate calibrated to the NIST AM-Bench benchmark for IN625, the architecture eliminates the dross produced by a geometry-blind controller, holds dross at zero with only a small residual lack-of-fusion under dual scoring, degrades gracefully under deliberate plant mismatch, and retargets to new alloys and constraints by editing ontology data rather than code. The results establish architectural feasibility, experimental calibration of the ratio is the principal next step.