Fresh-market blueberries require selective, gentle picking, which is labor-intensive and expensive. Over-the-row machine harvesters are fast but non-selective, bruising mixed-ripeness fruit and limiting yield to the processing market. Selective robotic harvesters typically target individual fruits rather than fruit clusters, which limits harvesting efficiency for small, densely clustered blueberries. This paper presents CLASP, a Cluster-Level Autonomous Selective Picking robot with a Soft Active Rolling-Band Gripper (SARB-Gripper). Two compliant bands envelop the cluster and roll against the fruit, drawing mature berries off in sequence, while closed-loop regulation of the pulling force keeps the applied load below the immature detachment threshold. A global-to-local perception pipeline pairs an eye-to-hand camera for global cluster detection and target selection with an eye-in-hand camera for local localization and cluster orientation estimation. Field measurements confirm a clear detachment-force separation between mature and immature fruit, and the SARB-Gripper reproduces a commanded pulling force to within \SI{3.7}{\percent}, enabling selective harvesting at the cluster level. In end-to-end field trials, CLASP autonomously grasped 23 of 25 presented clusters (\SI{92}{\percent}). With the component cost of approximately $3326 per unit, CLASP offers a scalable approach to selective cluster-level harvesting for fresh-market blueberries.
Selective harvesting in clustered strawberry environments is challenging because ripe fruits are often occluded by surrounding unripe fruits, making direct grasping unreliable. To address this problem, this paper proposes a hierarchical reinforcement learning framework, termed VGPA, which integrates a vision-guided decision mechanism and a Progressive Adaptive Exploration Strategy (PAES) for vision-based obstacle separation and harvesting. The task was decomposed into two sequential stages: obstacle separation and target grasping. At the high level, the vision-guided mechanism improved option selection and accelerated policy convergence. At the low level, PAES improved exploration efficiency and training stability during continuous control learning. In simulation experiments, the learned policy achieved a success rate of 96.7%. In addition, sim-to-real transfer experiments on a self-developed parallel robot showed that the proposed method achieved success rates ranging from 71.7% to 88.3%, outperforming direct picking while requiring only 1.22~s more average harvesting time. These results verified the effectiveness, generalization ability, and practical potential of the proposed method for robotic harvesting in complex clustered environments.
Robotic fruit harvesting often fails to reliably detect whether a fruit has been successfully picked, limiting efficiency and increasing crop damage. This problem is difficult due to compliant fruit and grippers, variable stem attachment, and occlusions in orchard environments. Prior work has explored vision-based perception and multi-sensor learning approaches for pick state estimation. However, minimal sensor sets and phase-dependent sensing strategies for accurate pick and slip detection remain largely unexplored. In this work, we design and evaluate a multimodal sensing suite integrated into a compliant suction-based apple gripper. Our approach is unique because it identifies which sensors are most informative at different phases of the pick, enabling predictive detection of failures before they occur. The contributions of this paper are a phase-dependent evaluation of multimodal sensors and the identification of minimal sensor sets for reliable pick state classification. Experiments in a real apple orchard show that Random Forest and Multilayer Perceptron classifiers detect successful picks and impending failures with over 90% accuracy, and Random Forest predicts pick/slip events within 0.09 s of human-annotated ground truth.
Robotic apple harvesting offers a promising solution to labor shortages in commercial orchards, but low throughput and poor performance in orchard environments hinder its commercial adoption. This paper presents a modular dual-arm apple harvesting robot that uses a vertically stacked arms to enable simultaneous operation in the upper and lower zones of a single tree, simplifying platform positioning from multi-tree lateral repositioning to single-tree stops. Compared to our prior horizontal dual-arm system, the platform integrates 5 advances: (1)a foundation-model-based perception pipeline combining Grounding-DINO and EfficientViT-SAM for robust fruit localization in unstructured outdoor environments; (2)7th-order jerk-bounded trajectory generation paired with a Control Barrier Function safety filter to achieve fast yet safe arm motions; (3)a linear sweep harvesting strategy with a 10cm approach buffer and rotational detachment that improves picking reliability; (4)a temporal-logic-based dual-arm coordination policy with vision-arm async scheduling that maximizes usage of a shared vacuum source; and (5)field validation in 2 commercial orchards covering different apple varieties and tree architectures during the 2025 harvest season. Across the 1738 arm cycles collected in these field trials, the system achieved an 80.0% per-attempt success rate and a mean per-arm cycle time of 7.53s. Fruit damage assessments confirmed that 91.2% of robotically harvested fruit retained the highest USDA grade (Extra Fancy), with bruise rates between 2.4% and 4.9%. With further improvements in the picking cycle time and handling of heavy foliage occlusions, this new modular robot design holds promise for commercial harvesting of apples.