Dexterous in-hand manipulation requires policies that coordinate high-DoF hand joints through intermittent, contact-rich interaction. Beyond target-orientation tracking, such policies must discover finger gaits that preserve object stability while adapting to geometry, anisotropy, pose, contact, and sensing changes. We propose \method, a tactile-conditioned behavior prior model for dexterous reorientation. \method distills multi-scale sphere specialists into a latent controller and lets downstream policies reuse the fixed tactile prior through residual latent actions, reducing renewed exploration from raw joint commands. The prior conditions on tactile-proprioceptive history so latent behavior reflects the current hand-object interaction. We evaluate arbitrary-pose transfer across anisotropic objects, commanded-axis rotation, and an arm-hand Grasp-to-AnyPose task in which the robot must grasp, lift, transport, and reach goal poses for novel tool geometries and generalized placements. Extensive experiments demonstrate that the proposed method accelerates training and enables stable policies where matched raw-action PPO remains near failure, with successful sim-to-real transfer in in-hand and arm-hand tasks.
Dexterous manipulation in everyday environments requires both anticipation and reaction: a robot must predict how contact should evolve while rapidly correcting local errors caused by slip, misalignment, unstable grasping, or force mismatch. Vision and language provide semantic and geometric guidance, but they cannot reliably reveal hidden contact states such as force, slip, and contact stability. Although tactile sensing exposes these physical cues, most existing policies treat touch as a low-frequency observation stream within a monolithic action model, coupling slow task reasoning, action generation, and fast contact feedback in a single loop. We introduce TouchWorld, a predictive-and-reactive tactile foundation model for dexterous manipulation. TouchWorld uses a hierarchical policy that separates vision-language subtask planning, tactile world-model prediction, visuo-tactile goal-conditioned action generation, and high-frequency tactile residual refinement. A High-Level Planning Layer produces executable subtasks and predicts tactile subgoals; a Visuo-Tactile Goal-Conditioned Policy generates nominal action chunks; and a Tactile-Conditioned Refinement Policy performs online residual correction using recent tactile and proprioceptive feedback. By using touch as both a predictive contact reference and a fast feedback signal, TouchWorld preserves the semantic generalization of vision-language-action policies while improving local contact adaptation. Across six long-horizon and contact-rich dexterous manipulation tasks, TouchWorld achieves 65.0% success in the clean setting and 53.7% success under human perturbations, outperforming the strongest baseline by 15.7 and 18.5 percentage points, respectively.
Human-like dexterous hands with multiple fingers offer human-level manipulation capabilities but remain difficult to train the control policies that can deploy on real hardware due to contact-rich physics and imperfect actuation. We present a sim-to-real reinforcement learning method that leverages dense tactile feedback combined with joint torque sensing to explicitly regulate physical interactions. To enable effective sim-to-real transfer, we introduce (i) a computationally fast tactile simulation that computes distances between dense virtual tactile units and the object via parallel forward kinematics, providing high-rate, high-resolution touch signals needed by RL; (ii) a current-to-torque calibration that eliminates the need for torque sensors on dexterous hands by mapping motor current to joint torque; and (iii) actuator dynamics modeling with randomization to account for non-ideal torque-speed effects and bridge the actuation gaps. Using an asymmetric actor-critic PPO pipeline, we train policies entirely in simulation and deploy them directly to a five-finger hand. The resulting policies demonstrate two essential human-hand skills: (1) command-based controllable grasp force tracking and (2) reorientation of objects in the hand, both of which are robustly executed without fine-tuning on the robot. By combining tactile and torque in the observation space with scalable sensing and actuation modeling, our system provides a practical solution to achieve reliable dexterous manipulation. To our knowledge, this is the first demonstration of controllable grasping on a multi-finger dexterous hand trained entirely in simulation and transferred zero-shot on real hardware.
Real-world learning for dexterous hands remains brittle because high-dimensional hand actions amplify imitation errors and make reinforcement-learning exploration prone to contact-breaking motion. While combining imitation learning (IL) with online reinforcement learning (RL) can reduce manual supervision, unconstrained exploration in raw hand-action spaces is sample-inefficient and risky for physical hardware. We introduce a latent motion prior module (\prior{}) that maps recent hand-action histories to a compact, history-conditioned latent prior and decodes continuous latent commands into executable high-dimensional hand targets. Built on this prior, \method{} is a three-stage real-world dexterous learning framework: it pretrains \prior{} from demonstrations, trains a visuomotor policy that predicts native arm commands and latent hand-action offsets, and improves the policy with online residual RL in the same latent hand-action space. This shared, decodable interface lets residual exploration make local corrections near demonstrated, contact-consistent hand motions rather than perturbing every finger joint independently. We evaluate \method{} on four real-robot dexterous manipulation tasks against raw, linear, and discrete hand-action interfaces. Starting from small task-specific demonstration sets, \method{} achieves a 56.25% average IL success rate and raises it to 98.75% after online RL, reaching 100% final success on three tasks and 95% on the remaining task.