cs.ROSep 18, 2026

2nd Place Solution to the HANDS 2026 Workshop Challenge-Dexterous Grasp Motion Track: Single-Shot Trajectory Warping for Grasp Motion Generation

Authors: Muneeb A. Khan, Woojin Kim, Shinwoo Kim, Muhammad Munsif, Binod Bhattarai, Seungryul Baek

Organizations: UNIST, South Korea · University of Aberdeen, UK · Fogsphere (Redev AI Ltd, UK)

Abstract

This report describes our 2nd place solution to the HANDS 2026 workshop challenge (Dexterous Grasp Motion track) in conjunction with ECCV 2026. In this challenge, we address grasp motion generation for the 12-DoF LinkerHand O6, aiming to produce physically plausible reach-and-lift trajectories for unseen objects from randomized initial hand poses in simulation. This task is particularly challenging because each grasp requires a per-step policy to make approximately 7070 twelve-dimensional decisions, with errors accumulating over time, while test objects and physical dynamics may differ from those encountered during training. To address these challenges, we propose editing a single successful GraspM3 demonstration instead of generating the motion step by step: a policy observes the object once and outputs a 12-D warp of the demonstration, which is then replayed open-loop. Moreover, we train the warp policy with one-step PPO over all 4,8244{,}824 training objects in parallel. As a result, our method achieved success rates of 94.61%94.61\% on the easy track, the highest of all submissions, and 57.18%57.18\% on the hard track of the private test set.

Figures & tables

Explore similar work

Jul 13, 2026

GraspGraphNet: Graph-Structured Multi-Embodiment Dexterous Grasp Generation

Dexterous grasp generation across robot hands is challenging because hands differ in kinematic topology, actuation dimensions, and native command spaces. We introduce GraspGraphNet, a topology-aware grasp generation framework that represents each hand as a URDF-derived kinematic graph and directly generates executable palm poses and joint configurations. GraspGraphNet combines hierarchical object surface encoding, differentiable forward kinematics, and dynamic world-edge message passing to model evolving robot-object interactions. It applies conditional flow matching directly in executable palm-pose and joint-state space, avoiding post-processing optimization, inverse kinematics, and retargeting. Using a shared model trained on Barrett Hand, Allegro Hand, and Shadow Hand, GraspGraphNet achieves an average success rate of 83.48% with 40ms inference time per grasp on a 40-object benchmark. Without retraining, the same model achieves 72.70% success on controlled finger-removal variants, demonstrating robustness to hand-topology variations. These results suggest that graph-structured hand representations can effectively support dexterous grasp generation across robot hands with different kinematic structures. Project: https://lysees.github.io/graspgraphnet-page
Jun 3, 2026

MoDex: A Diffusion Policy for Sequential Multi-Object Dexterous Grasping

This work addresses sequentially grasping multiple objects with a single dexterous hand without releasing those already held. Most dexterous grasping methods commit all of the hand's degrees of freedom to a single object, underutilizing its dexterity and leaving no redundancy for subsequent grasps. The proposed solution, MoDex, is a diffusion policy that predicts the next gripper pose directly from observations, conditioned on an opposition space and point cloud. The opposition space condition specifies which fingers participate in the current grasp, enabling the gripper to use only a subset of its available degrees of freedom while reserving the remaining degrees of freedom for subsequent grasps. To facilitate sim-to-real transfer, MoDex is trained in two stages: first through imitation learning on expert demonstrations, and subsequently through reinforcement learning fine-tuning, which consistently improves success rates over the pre-trained policy. We evaluate MoDex in simulation on a MuJoCo-based Franka Emika Panda robot equipped with an Allegro Hand and on the corresponding real-world hardware platform. Across both simulation and real-world experiments, MoDex achieves higher success rates than the evaluated learning-based baselines, improving performance by 2.92-17.92% and 6.67-17.78%, respectively. Project page: https://modex2026.github.io/.
Jan 31, 2026

DiffMorphGrasp: A Diffusion Framework Conditioned on Hand Morphology for Cross-Embodiment Grasp Generation

As robots are deployed across diverse environments, manipulation tasks require robot hands with different morphologies to satisfy varying task requirements, hardware capabilities, and cost constraints. However, transferring grasping policies learned on one robot hand to another with a different morphology remains a fundamental challenge due to variations in kinematic structures and degrees of freedom across embodiments. To address these limitations, we propose DiffMorphGrasp, the first diffusion-based framework that incorporates hand morphology information into the generative process for cross-embodiment dexterous grasping. The proposed approach maps grasps from diverse robotic hands into a reference hand pose, providing a common space for learning. Grasp generation is then continuously conditioned on structured representations of hand kinematics, encoded as graphs derived from hand configurations, together with object geometry. In addition, we introduce a loss function that computes joint-level errors over the hand kinematic structure to constrain the generated grasps during training. To evaluate DiffMorphGrasp, we construct a new benchmark for assessing grasp generation performance across robot hands with different morphologies. Extensive experiments demonstrate that DiffMorphGrasp achieves strong zero-shot generalization to unseen hand morphologies, enabling scalable cross-embodiment grasp deployment. Project page: https://georgewuzy.github.io/DiffMorphGrasp-website