FeasibleFlow: One-Step Joint Transport of Configuration Feasibility and Trajectories for End-to-End Driving
Authors: Xiang Li, Bikun Wang, Qing Xu, Jianjun Wang
Abstract
End-to-end autonomous driving maps current observations directly to future trajectories, yet those trajectories must remain valid as the scene evolves. Future state modeling aims to address this temporal mismatch, but general representations often contain information unrelated to ego planning and affect trajectory generation only through auxiliary supervision, static conditioning, or proposal evaluation. We propose FeasibleFlow, a one-step end-to-end generative framework that jointly transports a configuration-space feasibility field and multimodal ego trajectories. Our Asymmetric Joint MeanFlow uses the pathwise Jacobian-vector product in the MeanFlow identity to incorporate field evolution into trajectory transport. Because safety feedback is sparser than progress feedback, we further introduce the Anchor-relative ranker (ARR) and Pareto-ReinFlow to balance safety and progress in candidate selection and generation, respectively. Experiments on the NAVSIM benchmark demonstrate the strong performance of FeasibleFlow and validate both the joint transport of feasibility and trajectories and the proposed safety-first mechanisms.
Safety-critical traffic scenario generation is essential for evaluating autonomous driving systems under rare but high-risk interactions. Existing diffusion-based methods offer strong controllability in closed-loop generation, but their iterative denoising process is computationally expensive and may accumulate sampling and guidance errors over long rollouts, causing unrealistic motion artifacts such as jitter, abnormal acceleration, and off-road behavior. To address these issues, we propose RiskFlow, a closed-loop safety-critical multi-agent traffic generation framework that formulates future trajectory generation as transport in the action space. Instead of relying on iterative denoising, RiskFlow learns an average velocity field over a finite interval to transform Gaussian action sequences into future acceleration and yaw-rate commands with a single forward pass, using a JVP-based objective for efficient and stable training. At test time, RiskFlow applies output-space guidance to the generated actions, steering selected critical agents toward risky interactions while regularizing off-road behavior, and reconstructs physically feasible trajectories through vehicle dynamics. Experiments on nuScenes with tbsim closed-loop evaluation show that RiskFlow achieves a strong adversariality-realism trade-off across multi-agent and long-horizon settings. Compared with representative baselines, RiskFlow consistently improves realism while maintaining competitive safety-critical generation capability, and substantially reduces inference time for evaluation.
We present DriveAnchor, a three-stage framework for autonomous driving planning that achieves behavioral diversity, controllability, and safety in a composable pipeline. Demonstration Flow Pretraining replaces the unstructured Gaussian prior with a vocabulary of 2,398 trajectory shapes constructed by farthest-point sampling, structurally grounding behavioral diversity in vocabulary coverage. Guided Flow Post-training jointly post-trains an Energy Field module with flow matching (FM), conditioning the Energy Field on static road geometry alone, to relocate anchors toward user-specified corridor polygons before flow generation, adding controllability without differentiable guidance; after Stage 2, new corridor presets require only Energy Field updates, not FM retraining. Reward-Refined Flow Fine-tuning applies zeroth-order reinforcement learning to align each anchor's output with collision-avoidance objectives: because the flow-matching model is a deterministic feedforward network in single-step mode, each anchor uniquely determines the output trajectory, reducing reward optimization to a direction search in anchor space without log-likelihood computation or ODE-to-SDE conversion. Evaluated on approximately 2 million held-out driving scenarios, DriveAnchor reduces near-range collision rates by 89% and improves mean reward by 32% without degradation in imitation accuracy, with 2.06 ms inference on NVIDIA Drive Orin. DriveAnchor has been validated through real-world vehicle testing, confirming its practicality for production deployment.
End-to-End (E2E) autonomous driving models have shown growing capability in recent years, with performance improving on increasingly challenging benchmarks. However, modern generative E2E planners still suffer from a substantial number of catastrophic failures in safety-critical scenarios. We find that many such failures arise from violations of physical constraints and safety requirements, leading to unsafe behavior. Motivated by this finding, in this paper, we focus on improving safety outcomes in generative end-to-end driving with a targeted reduction of catastrophic planning failures, instead of enhancing average planning quality. Towards this end, we propose DriveSafer, a failure-aware safety framework for end-to-end planners. DriveSafer explicitly steers generative planners towards safe behaviors leveraging both training-time safety constraints and inference-time safety guidance. Compared to the state-of-the-art DiffusionDrive model, on the NAVSIM benchmark, DriveSafer reduces the number of catastrophic failures (PDMS=0) by 48%, with over 65% reduction in drivable-area compliance failures.