Neural-rendering-based SLAM relies on rendered RGB-D residuals for camera tracking and map optimization, but the reliability of these predictions can vary substantially because of sensor noise, limited observation coverage, and incomplete map representations. Without an explicit reliability estimate, unreliable residuals may adversely affect pose optimization, while frames already well explained by the current map may trigger redundant mapping updates. In this paper, we present BayesianGS-SLAM, an uncertainty-aware 3D Gaussian Splatting SLAM framework that estimates predictive color and depth uncertainty during mapping and consistently reuses it across the SLAM pipeline. Our tractable probabilistic formulation combines a sensor-noise uncertainty component with an opacity-induced map-representation component propagated through the rendering process. The resulting predictive uncertainty is used to augment mapping, normalize tracking residuals through a robust pose objective, and evaluate incoming frames using a predictive-surprise-based keyframe criterion. Unlike prior uncertainty-aware neural-rendering SLAM methods that primarily consider color uncertainty or use uncertainty only during mapping, our framework estimates predictive uncertainty for both color and depth and integrates it into mapping, tracking, and keyframe selection. Evaluations on real-world RGB-D datasets demonstrate substantially improved depth uncertainty-error ranking compared with existing uncertainty-aware SLAM methods. Moreover, the proposed keyframe-selection strategy reduces the number of selected keyframes and mapping calls while maintaining competitive tracking and rendering performance.
ICP-based 3D Gaussian Splatting (3DGS) SLAM tracks in real time by registering incoming frames against map Gaussians, using each primitive's covariance for both rendering and registration. These two uses place conflicting demands on one covariance. The mapper shapes it to minimize photometric error, often flattening it against surfaces, while robust registration typically benefits from measurement uncertainty. We propose a dual-covariance parameterization. Each Gaussian keeps a single mean but holds two covariances: a rendering covariance optimized by the mapper, and a tracking covariance derived from an RGB-D sensor noise model. We further use the tracking covariances as Gaussian anchors for image corners, providing constraints in directions where depth geometry is weak. We evaluate on TUM RGB-D, ScanNet, Replica, and two outdoor sequences recorded with a RealSense D435i on wheeled and handheld platforms. We achieve robust tracking performance across multiple scenes and reduced odometry drift, while tracking at ∼ 60 FPS.
Real-time dense SLAM is a core capability for robotics applications that require robust localization and high- quality mapping in dynamic or fast-changing environments. Recent 3D Gaussian Splatting (3DGS)-based SLAM methods have shown promising performance, but most are designed for narrow-FoV pinhole cameras, where limited angular coverage weakens pose observability and often leads to unstable photo- metric optimization under rapid motion and large viewpoint changes. We present PanoGS-SLAM, the first panoramic dense SLAM system built on 3D Gaussian Splatting. Our method per- forms differentiable rendering and pose optimization directly in the spherical domain, enabling omnidirectional photometric constraints for more stable tracking. To improve geometric consistency and robustness, we introduce (1) a sphere-consistent photometric loss that compensates for the area distortion of equirectangular projection, and (2) a depth-guided Gaussian initialization strategy that stabilizes incremental mapping in newly observed regions. Extensive experiments on both real and synthetic panoramic benchmarks (PALVIO and SynPano) show that PanoGS-SLAM consistently outperforms geometric and GS-based baselines in tracking accuracy and rendering quality, while achieving fast front-end convergence and real-time perfor- mance. In addition, controlled field-of-view experiments reveal a clear monotonic improvement in optimization conditioning and convergence stability as angular coverage increases, high- lighting the fundamental role of sensing geometry in shaping the optimization landscape of differentiable Gaussian-based SLAM. The source code will be made publicly available.
Recent advances in 3D Gaussian Splatting (3DGS) have enabled significant progress in dense dynamic Simultaneous Localization And Mapping (SLAM). Prevailing methods typically discard predefined dynamic objects, ignoring that transiently static objects offer valuable geometric constraints for pose estimation. A recent work attempts to leverage this potential by employing per-pixel uncertainty maps to quantify the magnitude of motion. While this approach enables transiently static objects to enhance pose estimation, it erroneously integrates these objects into the static map, resulting in persistent artifacts. Moreover, its reliance on purely geometric information leads to ambiguous object boundaries in the uncertainty maps. To overcome these limitations, we present DL-SLAM, a monocular Gaussian Splatting SLAM system built upon a novel dual-level probabilistic framework. Our method computes dynamic probability maps by combining semantic and geometric information. These pixel-level probabilities are lifted to 3D and aggregated to derive an object-level dynamic probability for each instance. Object-level probability enables the categorical pruning of dynamic Gaussians, resulting in an artifact-free static map. The static map, in turn, provides a geometrically consistent guidance to refine the pixel-wise probabilities, enhancing their reliability. Experimental results demonstrate that DL-SLAM outperforms existing approaches, improving tracking accuracy by up to 13% while generating high-fidelity semantic maps.