This article presents a bimanual teleoperation pipeline and conceptual design of a deployable four-finger payload for intra-vehicular free-flyers. Future habitats in low-Earth orbit (LEO) will require systems to perform mundane tasks like cargo handling and maintenance during crewed and uncrewed periods. The gripper payload provides 17 manipulation degrees-of-freedom (DoF) through four independently actuated fingers on a linear rail system. To control it, a virtual reality (VR) device interface maps the human ground operator's hand motions to the finger pairs, their separation to the rail, and common wrist motion to Astrobee translation. We present the preliminary results of teleoperating Astrobee in a custom zero-gravity MuJoCo-based International Space Station (ISS) simulator through ten repeated trials of transporting a rigid ISS Cargo Transfer Bag (CTB). We measure task success, continuous contact retention, completion time, and cargo motion.
Astrobee's existing one-degree-of-freedom (DOF) underactuated compliant claw gripper enables perching on the International Space Station (ISS), but provides limited capability for continuous dexterous manipulation. More complex microgravity tasks require an end-effector that can maintain stable contact while limiting disturbance to the free-flying base, since contact forces directly couple into base motion. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, 6-DOF gripper, with the Astrobee free-flying robot for microgravity manipulation. The system is evaluated in MuJoCo using Astrobee's standard handrail perching sequence, including approach, perching, and subsequent pan and tilt motions. Compared with Astrobee's existing gripper, DexCoHand preserves the commanded pan and tilt motions while reducing unintended cross-axis base motion. Hardware experiments on Earth further demonstrate DexCoHand's dexterous manipulation capabilities and its potential for more adaptable intelligent manipulation tasks.
We propose a safety-critical framework for the cooperative transportation of passive targets in microgravity, where a team of chaser robots acts through unilateral pushing contacts to track a human-provided desired twist while ensuring safe target motion. The pushing-only nature of the interaction introduces sparse, configuration-dependent actuation constraints requiring chasers to physically relocate on the target body when the desired pushing allocation changes. To address these challenges, we formulate a delay-aware feedback control architecture leveraging Control Lyapunov Function (CLF) and Control Barrier Function (CBF) constraints within a mixed-integer thrust allocation program to enforce stability and safety of the target, respectively. The proposed framework enables reference tracking while guaranteeing obstacle avoidance with a circular obstacle despite intermittent control authority, providing a foundation for human-supervised cooperative transportation of free-flyers in space environments. The proposed framework is validated through Gazebo simulations.
Gregorio Marchesini, Nicola De Carli, Sihyun Cho +5
Parallel-jaw grippers are the default manipulator choice in robotics because they are simple, robust, and inexpensive. Their limited in-hand mobility, however, often forces large arm motions and restricts dexterous manipulation in confined workspaces. We present a parallel-gripper upgrade: a double-soft-belt-based finger module that preserves standard opening/closing while adding three in-hand degrees of freedom (DoF): translation, pitch, and roll. The mechanism is deliberately kept simple and engineered for inexpensive manufacturing and straightforward integration, preserving the reliability and precise control of traditional parallel grippers while greatly broadening the range of manipulation capabilities. To demonstrate the utility of the added DoFs, we integrate the gripper in two control pipelines. First, we adapt a model predictive controller for in-hand manipulation of known objects. Second, we introduce a lightweight teleoperation interface that enables simultaneous control of the robot arm and gripper (10 DoFs total) with minimal hardware. Across a suite of challenging manipulation tasks executed via teleoperation, MPC, and trained policies, the proposed gripper consistently improves dexterity and task feasibility compared to a conventional parallel gripper