Passive-wheeled terrestrial-aerial bimodal vehicles (TABVs) combine aerial mobility with energy-efficient ground locomotion. However, reliable air-ground mode switching under limited onboard perception and robust ground trajectory tracking across diverse terrains remain challenging when targeting real-world applications. In this work, we propose a learning-based air-ground motion control framework for passive-wheeled TABVs: 1) a learned mode selector for autonomous air-ground motion mode switching. The selector uses historical single-point time-of-flight (ToF) measurements and robot states together with future reference information to determine the active locomotion mode. 2) a reinforcement learning control policy for trajectory tracking. The policy combines proprioceptive observations with future reference information to anticipate trajectory changes. For ground locomotion, multi-terrain training and dynamics randomization enable robust tracking across different terrains. Simulation and real-world experiments demonstrate reliable air-ground switching under limited perception and accurate ground tracking across diverse terrain conditions. The learned selector outperforms a rule-based mode selector in challenging transitions, while the ground controller achieves lower position RMSE than PID across all tested conditions and maintains decent tracking where NMPC fails. With these capabilities integrated, the system tracks a 101m air-ground trajectory through multiple autonomous mode transitions with a position RMSE of 0.08m.
In this work, we present Tilt-Ropter, a fully actuated hybrid aerial-terrestrial vehicle (HATV) that integrates tilt rotors with passive wheels to enable efficient multi-modal locomotion. Unlike conventional underactuated HATVs, the fully actuated design of Tilt-Ropter allows decoupled force and torque control, improving maneuverability and ground locomotion efficiency. A unified nonlinear model predictive controller (NMPC) is developed to track reference trajectories, enforce non-holonomic constraints, and accommodate contact effects across locomotion modes, while ensuring actuator feasibility through dedicated control allocation. To address complex wheel-ground dynamics, an external wrench estimator is incorporated to provide real-time interaction wrench estimates. The system is validated through simulation and real-world experiments, including seamless air-ground transitions and trajectory tracking tasks. Experimental results demonstrate low tracking errors in both modes and reveal a 92.8% reduction in power consumption during ground locomotion compared with flight, highlighting the platform's potential for long-duration missions where energy efficiency is critical.
This paper presents ERNEST, a four-wheeled planetary rover concept equipped with a two-degree-of-freedom Active Gimbal Suspension that combines yaw and roll actuation to enable wheel reconfiguration, steering, and active load redistribution. A single neural network controller, trained to track a desired path across challenging terrain, fully unlocks the capabilities of this actuated suspension system for autonomous obstacle negotiation. A reinforcement learning framework is developed using the high-fidelity DARTS simulation engine, which combines rigid-contact dynamics and Bekker-Wong terramechanics, enabling the emergence of locomotion strategies adapted to loose-soil conditions. To obtain a single unified controller across heterogeneous terrains, a policy consolidation strategy merges the experience of terrain-specialized agents into one neural network, eliminating the need for explicit terrain classification and controller switching. The resulting controller operates on a combination of proprioceptive and exteroceptive feedback, including sparse stereo-derived terrain elevation, chassis attitude, joint states, and force-torque measurements. Zero-shot transfer to the physical rover is achieved through domain randomization, sensor noise injection, and model-to-real system identification. Experimental results demonstrate autonomous traversal of rock fields, a Bickler trap (bump obstacle), a wheel-high step, sand ripples, and sandy slopes. On a 20° sandy slope, the learned controller reduces the cost of transport by 37% on dry sand despite the additional actuation, and achieves superior performance on wet sand where the passive suspension becomes completely immobilized. A video accompanying this paper is available at https://youtu.be/d684P5a3xMc
Arthur Bouton, Tristan D. Hasseler, Michael Paton +5
Off-road mobility requires autonomous mobile robots to generalize across heterogeneous vehicle fleets and continuously changing terrain conditions. Existing cross-vehicle adaptation approaches generally assume flat terrain, while terrain-aware kinodynamic models often require platform-specific data collection and retraining. To this end, we propose VertiAKD, a unified framework for transferring and adapting off-road kinodynamic knowledge across diverse vehicles on geometrically and semantically complex terrain simultaneously. VertiAKD learns a shared mobility representation that jointly encodes vehicle configurations, trajectory transitions, and local elevation and semantic terrain features. Given limited data from a novel vehicle operating on unseen terrain, VertiAKD identifies the most relevant mobility descriptors and transfers their knowledge to initialize a terrain-aware kinodynamic model via function encoders, which is then periodically refined online from streaming observations without gradient-based retraining. We evaluate VertiAKD in the Verti-Bench simulator, built on the Chrono multi-physics engine, and on five physical configurations of the Verti-4-Wheeler platform. With only one minute of new trajectory data and associated terrain features, VertiAKD reduces long-horizon prediction error by up to 34.52% over direct mobility descriptor transfer across diverse unseen vehicle configurations and 94.43% over competing baselines. We further demonstrate robust closed-loop trajectory tracking in both simulation and physical experiments, highlighting the effectiveness of terrain-aware cross-vehicle knowledge transfer for accurate modeling and reliable off-road navigation.