Tilt-Ropter: A Fully Actuated Hybrid Aerial-Terrestrial Vehicle with Tilt Rotors and Passive Wheels

Multirotors are widely used in applications ranging from surveillance to precision agriculture, yet conventional designs remain limited by their under-actuation. Tilt-rotor configurations overcome this limitation by enabling full actuation. This paper investigates neural-network-based control strategies for a fully actuated tilt-rotor system with four thrust-vectoring inputs. Our work is structured in two parts. First, we deliberately present a negative result by evaluating a direct input-output control approach. In this method, multilayer perceptrons (MLPs), long short-term memory (LSTM) networks, and transformer models are trained to map system states and their desired values directly to control signals. We show that this strategy fails to stabilize the system, highlighting the inherent difficulty of applying direct input-output learning to highly unstable plants. Second, as the main contribution, we propose a neural-network-enhanced sliding mode controller (SMC). The method decomposes the system dynamics into input-independent and input-dependent components, with the former learned from a small dataset using lightweight networks, thereby reducing real-time computational demands. Moreover, the proposed method can be trained using flight logs collected from low-performance controllers, and the resulting dynamic model learned from real-world data can be used in simulation. We further compare MLP- and LSTM-based implementations under model uncertainties and external disturbances, demonstrating the robustness and effectiveness of the proposed approach; in particular, the controller with the LSTM plant dynamics predictor achieves superior performance to its MLP-based counterpart while also exhibiting lower runtime.

We present a novel and minimalistic design of an aerial-terrestrial robot DASH: Ducted Aerial Spring Hopper. The goal is to enable both aerial and ground locomotion capabilities on a unified mobile robot that is mechanically-minimalistic, locomotion-versatile, and energy-efficient. We propose an organic integration of ducted fan co-axial body with a springy leg at the bottom for realization. The ducted fan module provides thrust-vectoring as the main actuation for agile flying; when it is combined with the light-weight spring leg, the robot realizes highly efficient ground hopping with energy circulation. Moreover, to realize optimal locomotion with two modes, we employ a contact-implicit model predictive controller to automatically choose locomotion modes and actuation. We successfully validated the design and control of DASH through a range of tasks, including periodic hopping, aerial flight, and mode-free locomotion with autonomous mode transitions during obstacle traversal.

Autonomous multirotor landings on uncrewed surface vessels (USVs) are critical for persistent maritime operations but remain challenging due to wave-induced tilt, wind disturbances, and limited landing area. Many existing approaches exhibit small pose tolerance for reliable landing. This paper presents a lightweight toggleable adhesion mechanism to improve landing reliability. The system uses a motor-driven corkscrew that engages hook-and-loop material on the landing surface, enabling active adhesion during landing and controlled release during takeoff. We evaluate a prototype using a modified Crazyflie 2.0 and a custom tilting platform at fixed angles representative of extreme wave conditions. Using only a simple vertical PID controller, the proposed approach increases landing success from an average of 40% (baseline) to 80% across platform tilts up to 43 degrees using appropriately selected actuation settings.