cs.CVSep 22, 2026

From greenhouse climate to individual leaves: an organ-resolved model of lettuce growth

Authors: Md Hasibur Rahman, Faraz Ahmed, Hafiz Muhammad Bilal, Daniel Wells, Dylan Tobin, Tanzeel U. Rehman

Read PDF
Ask AI
Cite

Copy citation

DOINot available for this paper

Abstract

Greenhouse climate management aims to improve crop production while limiting energy use. This requires knowing how a crop will respond before conditions are changed. A crop digital twin can support this decision only if it represents how plant physiology and structure develop together. A unified framework was developed to simulate lettuce growth from the physiology of individual leaves. Each leaf received the conditions at its position in the canopy and contributed carbon through photosynthesis. Part of this carbon was used for maintenance and the remainder supported growth, distributed among leaves by their age, size and local environment. The predicted leaf mass, area and age generated an evolving three-dimensional plant in NVIDIA Isaac Sim. Ray tracing calculated the radiation intercepted by each leaf and returned it to photosynthesis, so structure and growth influenced each other over time. Against greenhouse measurements, the relative root mean square error was 9.5% for total dry weight and 9.2%, 12.7% and 13.1% for leaf number, canopy diameter and largest-leaf area, respectively. A 30% decrease in incident radiation reduced final dry weight by 10.4%, while the same increase raised it by 6.9%, and adding 200 ppm carbon dioxide raised it by 46.1%. Within a simulated 40-plant block, interior plants accumulated 8.6% less dry weight than border plants with identical initial states, and the leaf-specific tipburn index rose in the enclosed leaves over the period in which tipburn appeared on the greenhouse plants. Resolving individual leaves therefore explains how local exposure changes plant growth within the greenhouse. The framework provides the forward plant model needed for a bidirectional digital twin, where observations of the physical plant can update predictions and support greenhouse climate decisions.

Explore similar work

CardsList
Jun 1, 2026cs.RO

A Measurement-Driven Digital Twin Architecture for Plant-Level Biomass Estimation and Growth Forecasting in Hydroponic Systems

Alternatives to soil-based horticulture, such as hydroponics, have been developed to respond to food distribution concerns for dense urban centers. A new system was developed to track an individual lettuce plant's growth in a hydroponic environment, utilizing streams of measured information and available models to continuously update the growth trajectory estimates for a plant. These "digital twin" models were integrated into an operating hydroponic greenhouse, with custom horticultural and sensor hardware to grow and measure relevant information. To aid in updating model parameters, plant yield was continuously measured with a custom neural network, using RGB-D images of the plants as an input. The network, trained on a collected dataset of 1300 images, was able to estimate mass within 1.5 g of the ground-truth value. After integration into the custom system, digital twin growth projections could approximate future yield between one and four days in the future, maintaining around a 2 g forecasting error.
Morgan Mayborne, Abhisesh Silwal, George Kantor
Mediterranean GreenhousesCognitive Digital TwinsDigital TwinsAbove-Ground BiomassNeural Network
AskPDF
Sep 14, 2026cs.CV

LettuceVisSim: A Simulator That Generates Lettuce Image Time-series for Vision-Based Reinforcement Learning

Vision-based reinforcement learning holds strong potential for decision-making in controlled environment agriculture (CEA). However, its development is hindered by the scarcity of labelled crop images. To address this gap, LettuceVisSim, a lettuce growth simulator that generates labelled time series of crop images, was developed and validated. The simulator contains a process-based model (PBM) for shoot dry weight dynamics, a canopy layout algorithm for deriving canopy layout representations from shoot dry weight, and a Unity rendering engine for image generation. Five findings support the simulator. First, the PBM reproduced shoot dry weight under dynamic plant-density management with R2=0.84\mathrm{R}^{2}=0.84. Second, a piecewise cubic regression mapped shoot dry weight to potential projected area with R2=0.94\mathrm{R}^{2}=0.94. Third, the canopy layout representation was validated using 12 experimental datasets each having different dynamic environmental and spacing conditions. It reproduced the ground coverage ratio dynamics observed in measured images, achieving R2=0.84\mathrm{R}^{2}=0.84 when driven by measured shoot dry weight and R2=0.40\mathrm{R}^{2}=0.40 (0.76 excluding one outlier) when driven by PBM-simulated values. Fourth, the Unity rendering engine converted canopy layout representations into RGB and segmentation images at less than 10~ms. Fifth, a demonstration showed that a lighting-control policy can be learned and applied by observing only crop images that were generated with LettuceVisSim, providing a proof of concept of vision-based reinforcement learning in CEA using LettuceVisSim.
Ziye Zhu, Bert van 't Ooster, Congcong Sun +2
Mediterranean GreenhousesVision Sensors
AskPDF
Jun 20, 2026cs.LG

VegSim: A Geospatial World Model for Scenario-Conditioned Vegetation Simulation

Vegetation monitoring under climate stress requires answering not only how it will evolve given the expected weather, but how it would respond to alternative meteorological conditions. Forecasting models return the expected vegetation state for the observed weather and cannot answer these scenario-conditioned questions, because future weather is fixed to the recorded trajectory. We present VegSim, a geospatial world model for scenario-conditioned vegetation simulation. VegSim infers a latent vegetation state from sparse satellite-derived NDVI histories, past meteorological covariates, and static spatial context, propagates it forward under future weather forcing through recurrent latent dynamics, and decodes predictive NDVI quantiles at each lead time. Because future forcing enters as a controllable input, the same trained model supports probabilistic forecasting under observed weather and conditional simulation under user-defined meteorological forcing, without supervision on scenario responses. We evaluate VegSim on GreenEarthNet across in-distribution data and spatial, temporal, and joint spatial-temporal shift, where it achieves strong point and probabilistic accuracy against time series and Earth observation forecasting baselines while using a compact architecture. We then simulate vegetation responses across Europe under four meteorological scenarios, and in a France summer 2022 case study, obtaining spatially coherent patterns consistent with known sensitivity to temperature and precipitation. The code is available at https://github.com/arco-group/vegsim.
Irene Iele, Elena Mulero Ayllón, Paolo Soda +1
Global Climate ModelsNormalized Difference Vegetation IndexClimate
AskPDF