CFD Correction of Open Tip Clearance Flow in a Compressor Cascade Using VAE Latent Space Adaptation

We propose an efficient retraining strategy for a parameterized Reduced Order Model (ROM) that attains accuracy comparable to full retraining while requiring only a fraction of the computational time and relying solely on sparse observations of the full system. The architecture employs an encode-process-decode structure: a Variational Autoencoder (VAE) to perform dimensionality reduction, and a transformer network to evolve the latent states and model the dynamics. The ROM is parameterized by an external control variable, the Reynolds number in the Navier-Stokes setting, with the transformer exploiting attention mechanisms to capture both temporal dependencies and parameter effects. The probabilistic VAE enables stochastic sampling of trajectory ensembles, providing predictive means and uncertainty quantification through the first two moments. After initial training on a limited set of dynamical regimes, the model is adapted to out-of-sample parameter regions using only sparse data. Its probabilistic formulation naturally supports ensemble generation, which we employ within an ensemble Kalman filtering framework to assimilate data and reconstruct full-state trajectories from minimal observations. We further show that, for the dynamical system considered, the dominant source of error in out-of-sample forecasts stems from distortions of the latent manifold rather than changes in the latent dynamics. Consequently, retraining can be limited to the autoencoder, allowing for a lightweight, computationally efficient adaptation procedure with very sparse fine-tuning data.

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4%, 1.0%, and 15.6%, respectively, while VATO-A achieves reductions of 15.8%, 7.5%, and 31.2%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50% beyond the training range, VATO-A retains a 26.9% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

Model-based active flow control requires predictive models that are accurate, stable, and fast enough for real-time optimisation. In controlled wake flows, this is often achieved through Reduced-Order Models (ROMs) that first compress high-dimensional velocity snapshots into a latent space and then learn a time- stepping predictor for the dynamics in the latent space. Here, we study how the choice of the spatial encoder affects the predictability of the resulting latent coordinates for wake flows under control inputs. Using two actuated 2D wake configurations, a simplified truck wake and the fluidic pinball, we compare Proper Orthogonal Decomposition (POD) against nonlinear Convolutional Autoencoders (CAEs) and two types of variational autoencoders for compression, and evaluate several temporal predictors based on Long Short-Term Memory networks. CAEs achieve higher compression efficiency and sharper short-term reconstructions, but they produce latent dynamics that are more irregular and with broadband spectral content. As a consequence, long-horizon forecasts degrade faster and show a higher probability of catastrophic divergence than POD-based models. POD yields smoother latent trajectories that are easier to learn and extrapolate, leading to more reliable predictions beyond the short- term regime. These results reveal a clear trade-off between compactness and forecast accuracy, and suggest that the stability of the latent dynamics prediction can outweigh maximal compression. This is particularly relevant for control strategies rooted in forecasts of the dynamics, such as model predictive control and reinforcement learning. The findings provide practical guidance for designing actuation-aware, hardware-feasible predictive ROMs for real-time flow control.