PHD-Hand: A Printable Humanoid Dexterous Hand with Linkage-Driven 3-DOA Digits

Dexterous robotic hands face a longstanding trade-off among dexterity, compactness, and affordability. Particularly, high-degree-of-freedom designs typically demand complex actuation and transmission, hindering integration into human-scale forms. To address these challenges, this work presents a compact, low-cost linkage-driven anthropomorphic hand that achieves high dexterity, structural integration, and human-hand-like functionality. The hand integrates 20 joints driven by 16 independent actuators, with all actuation, sensing, and transmission components compactly embedded within a human-hand-sized structure. The resulting prototype weighs only 320g at a total cost below USD 400. To meet these objectives, a hybrid mechanical architecture combining planar and spatial linkage mechanisms is proposed, enabling decoupled multidirectional motion, biomimetic joint synergies, and high passive load-bearing capability. The thumb further incorporates biomimetic features supporting human-like reconfiguration and opposition movements. Through the coordinated integration of these mechanisms and structural layout, the prototype achieves a highly integrated design with anthropomorphic dexterity. Experimental evaluations demonstrate that the hand achieves the maximum Kapandji score, reproduces all 33 Feix grasp types, and performs stable grasping and dexterous manipulation across a wide variety of daily objects and tools. These results validate the proposed hand as an affordable, compact, and mechanically efficient platform for dexterous manipulation, teleoperation, and robot learning in human-centered environments.

Designing anthropomorphic robotic hands that balance functional dexterity with mechanical simplicity remains a significant challenge. Inspired by human hand synergies, this paper presents the SyLink Hand, an anthropomorphic dexterous hand that integrates biomechanical synergy principles with linkage-driven transmission mechanisms to achieve a high degree of anthropomorphism in appearance, kinematics, and functionality within a compact and cost-effective architecture. Biomechanical analysis of natural hand motions using motion capture gloves reveals strong kinematic correlations among hand joints, providing the basis for a simplified yet functional degree-of-freedom (DOF) configuration. Guided by these synergistic characteristics, optimized linkage mechanisms are employed to coordinate multiple joint motions and reproduce natural finger trajectories. A novel spherical four-bar linkage is further proposed to achieve decoupled flexion/extension (Flex/Ext) and abduction/adduction (Abd/Add) at the metacarpophalangeal joint within a compact form factor. The resulting prototype integrates 19 joints driven by 11 actuators, with a total mass of 520g and a manufacturing cost of approximately USD 400. Experimental evaluations demonstrate its human-like kinematic performance, high load-bearing capability, and versatile grasping and manipulation skills. These results validate that the synergy-inspired, linkage-based design effectively balances anthropomorphism, mechanical simplicity, and functional versatility, highlighting its potential for practical deployment in dexterity-demanding robotic applications.

Dexterous manipulation is limited not only by algorithms but by a shortage of accessible hand hardware that combines human-scale morphology, ease of manufacturing or maintenance, tactile sensing, and practical cost. Existing dexterous hands tend to optimize some of these properties at the expense of others. We present MIDAS Hand, a low-cost, open-source, human-scale dexterous hand with integrated tactile sensing for manipulation research. MIDAS Hand provides 16 total degrees of freedom (DoF) with 13 active DoF, directly driven actuation with measurably low backdrive torque, and 283 three-axis tactile taxels in a compact 700 g package with a bill of materials under 3,000 USD. Built from 3D-printed components, it assembles in under three hours while providing the strength, repeatability, and maintainability needed for repeated real-world experiments. Alongside the hardware, we release a full stack: design files, build documentation, control and tactile Python APIs, simulation models, and retargeting and teleoperation pipelines. We characterize MIDAS Hand through workspace and grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing, showing that it offers a balanced, reproducible platform for tactile dexterous manipulation and human-to-robot data collection. Project page: https://midas-hand.com