cond-mat.mtrl-sciOct 31, 2026

Beyond Synthesis Conditions: Linking In-situ Growth Dynamics to Carbon Nanotube Forest Properties through Multimodal Machine Learning

Authors: Shun Muroga, Takashi Tsuji, Shunsuke Sakurai, Don N Futaba

Organizations: Nanocarbon Material Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 5, 1-1-1, Higashi, Tsukuba, Ibaraki, 305-8565, Japan · Materials DX Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 5, 1-1-1, Higashi, Tsukuba, Ibaraki, 305-8565, Japan

Abstract

Machine learning for chemical vapor deposition (CVD) of carbon nanotubes (CNTs) has largely mapped static synthesis conditions to final properties, implicitly treating these conditions as a complete description of growth. Here, we test this assumption by integrating gas-flow conditions with in-situ time-resolve growth profiles (growth curves) of vertically aligned CNT forests. We introduce an observation-window analysis, in which prediction is evaluated as a function of observation time by providing models with the growth curve only up to progressively later times, to determine not only whether a property can be predicted, but when the necessary information becomes available during synthesis. Clustering of normalized growth curves revealed distinct growth patterns independent of final forest height. The gas conditions alone could predict the initial growth rate but not the growth lifetime and failed to capture the variation in yield (R^2<0). Adding the growth curve improved yield prediction (R^2~0.4-0.5), with the relevant information emerging during the intermediate and later stages of growth rather than at its onset. In contrast, density and G/D ratio, which forest height does not record, showed no consistent improvement. The maximum height and lifetime could be estimated with moderate accuracy midway through the 10-min growth. Permutation feature importance identified water vapor and H_2, both linked to catalyst activity, as the most informative gas variables. These results indicate that variation unexplained by synthesis conditions is not merely noise but reflects an evolving catalyst state, and they establish mid-growth decision points for autonomous synthesis, enabling early termination of unpromising batches and, ultimately, in-batch adjustment of growth conditions.

Explore similar work

Mar 17, 2026

Data-knowledge dual-driven intelligent framework for full-chain, experiment-efficient synthesis of 2D dendrites

Exemplified by the chemical vapor deposition growth of two-dimensional dendrites, which has potential applications in catalysis and presents a parameter-intensive, data-scarce and reaction process-complex model problem, we devise a machine intelligence-empowered framework for the full chain support of material synthesis, encompassing rapid process optimization, accurate customized synthesis, and comprehensive mechanism deciphering.First, active learning is integrated into the experimental workflow, identifying an optimal recipe for the growth of highly-branched, electrocatalytically-active ReSe2 dendrites through 60 experiments (4 iterations), which account for less than 1.3% of the numerous possible parameter combinations.Then, a prediction accuracy-guided data augmentation strategy is developed combined with a tree-based machine learning (ML) algorithm, unveiling a non-linear correlation between 5 process variables and fractal dimension (DF) of ReSe2 dendrites with only 9 experiment additions, which guides the synthesis of various user-defined DF. Finally, we construct a data-knowledge dual-driven mechanism model by integration of cross-scale characterizations, interpretable ML models, and domain knowledge in thermodynamics and kinetics, unraveling synergistic contributions of multiple process parameters to the product morphology. This work demonstrates the ML potential to transform the research paradigm and is adaptable to broader material synthesis.
Dec 18, 2025

Predictive Inorganic Synthesis based on Machine Learning using Small Data sets: a case study of Hydrodynamic Diameter-controlled Cu Nanoparticles

Cu NPs have a broad applicability, yet their synthesis is sensitive to subtle changes in reaction parameters. This sensitivity, combined with the time- and resource-intensive nature of experimental optimization, poses a major challenge in achieving reproducible and size-controlled synthesis. While ML shows promise in materials research, its application is often limited by scarcity of large high-quality experimental data sets. This study explores ML to predict the DLS-derived hydrodynamic diameter of Cu NPs using a small data set of 25 syntheses. Latin Hypercube Sampling is used to efficiently cover the parameter space while creating the experimental data set. Ensemble regression models successfully predict hydrodynamic diameters with good predictive performance given the limited dataset. Since quantitative regression requires a unique DLS-derived hydrodynamic diameter, the regression model is restricted to mono-modal DLS distributions, while a complementary classification model identifies synthesis conditions for which quantitative prediction is applicable. Using equivalent out-of-sample validation, the ML and DoE models showed comparable generalization. The final ensemble model achieved an R2=0.74 compared to 0.60 for the DoE model, while retaining the complete synthesis parameter space, making it better suited for synthesis guidance. Additionally, classification models using both random forests and LLMs are evaluated to distinguish between large and small particles. These classification models exhibited only modest predictive performance, indicating that this small dataset is insufficient to fully exploit the capabilities of complex LLMs. Overall, this study demonstrates that carefully curated small data sets, paired with robust classical ML, can effectively support the synthesis of Cu NPs and highlights that for lab-scale studies, complex models like LLMs may offer limited benefits.
Jun 9, 2026

SwiftCTS: Fast Cross-Design Prediction and Pareto Optimization of Clock Tree Metrics via Few-Shot Calibration

Clock Tree Synthesis (CTS) is a computationally expensive stage in the physical design flow, requiring iterative EDA tool invocations to navigate a vast configuration space for optimal power, wirelength, and timing skew. Existing machine learning approaches require computationally expensive retraining or fine-tuning cycles to adapt to unseen macro architectures and are architecturally mismatched to the millions of evaluations demanded by exhaustive combinatorial search. We present SwiftCTS, a physics-informed surrogate framework that addresses both limitations simultaneously. By coupling lightweight, physics-grounded statistical features with gradient-boosted ensembles, SwiftCTS trains in under five seconds on a CPU and delivers sub-millisecond inference without GPU support. To handle out-of-distribution (OOD) designs without retraining or fine-tuning, we introduce a K-shot multiplicative calibration mechanism that anchors predictions to just one or two physical reference runs, reducing power prediction error from 24.5% to 3.3% and wirelength error from 56.6% to under 1% on unseen macros. Integrating this engine with an evolutionary optimizer, SwiftCTS evaluates 100,000 CTS configurations in under ten seconds, yielding Pareto-optimal frontiers that are physically validated within the OpenROAD flow. Closed-loop validation confirms prediction errors below 0.5% for power and wirelength, and timing skew predictions within five picoseconds on an OOD benchmark, consistently outperforming default tool heuristics across all target metrics. Code publicly available at: https://github.com/BarsatKhadka/SwiftCTS