cs.RONov 1, 2026

MagPillar: A Soft Magnetopillar Array Tactile Sensor for Robotic Surface Perception

Authors: Haotian Guo, Yu Feng, Hao Wu, Jiazhi Tang, Ningbin Zhang, Jianshu Zhou

Organizations: Department of Mechanical Engineering, National University of Singapore, Singapore. · School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Abstract

Robotic surface exploration benefits from tactile interfaces that accommodate contact and capture variations in surface characteristics. Herein, we report MagPillar, a tactile sensor inspired by spider tactile hairs that combines a magnetic pillar array with three-axis Hall sensing. A full-array mechanical and magnetic-field model characterizes how pillar deformation affects the superposed fields measured across the array, providing a physical basis for interpreting its contact responses. The compliant pillar architecture translates contact with surface textures and geometric features into distinct magnetic response patterns. Then, in robotic surface perception experiments, spectral features and logistic regression distinguish six material surfaces with an offline accuracy of 99.34% under within-session temporally blocked cross-validation. Continuous scans over periodic protrusions produce amplitude and peak-spacing variations consistent with changes in surface geometry. These findings connect compliant contact mechanics with distributed magnetic sensing, paving a new path for material recognition and qualitative surface-profile perception.

Figures & tables

Explore similar work

Oct 7, 2026

MagCilia: A Compact Magnetociliary Tactile Sensor with 3D Force Sensing for Robotic Contact Perception and Grasping Feedback

Robotic grasping and surface exploration benefit from simultaneous measurement of normal and tangential forces and from surface information obtained through contact. Here, we present a compact magnetociliary tactile sensor (MagCilia) that combines a flexible magnetic-cilia structure with a Hall sensor for 3D force sensing. Quasi-static finite element analysis is used to investigate structural deformation and magnetic responses under multidirectional loading. To reconstruct forces from the coupled magnetic channels, we propose causal history fusion regression (CHFR), which combines current magnetic-field measurements with their recent changes. Five-fold cross-validation grouped by calibration record yields root-mean-square errors of 0.40, 0.57, and 0.69 N for Fx, Fy, and Fz, respectively, with corresponding coefficients of determination of 0.93, 0.90, and 0.92. Robotic experiments demonstrate tangential-force-guided gripper adjustment and multi-axis load monitoring under external perturbations. Frequency-domain features of the reconstructed forces distinguish six surface categories with 99.39% accuracy in three-fold cross-validation grouped by acquisition session. An online robotic demonstration additionally identifies all six tested surfaces. These results demonstrate 3D force reconstruction, grasping feedback, and surface recognition using a single compact tactile unit.
Sep 29, 2026

A robust single-sensing-element tactile sensor for concurrent pressure and tackiness detection with real-time signal decoupling capability

Integrating tackiness sensation into the artificial skin of humanoid robots significantly enhances their cognitive and operational capabilities. However existing tactile sensors face challenges in decoupling of the multimodal signal and stability. Here we present a surface-soft tactile sensor that incorporates a Hall effect sensor and a soft magnetic composite within a robust elastic framework. The sensor surface indents under pressure and bulges prominently when retracted from sticky surfaces dynamically altering the Hall sensor-magnet distance. This generates whole-process-traceable and baseline-separated signals enabling real-time differentiation between pressure and pull-off force. This single-sensing-element design facilitates bimodal sensing at the same contact spot while eliminate stress cross-talk enhancing both accuracy and sensitivity. The fusion of a robust framework and magneto-mechanical sensing mechanism equips the sensor with exceptional reliability and excellent signal baseline stability. This tactile sensor holds substantial potential for advancing robotic capabilities in evaluating adhesive properties monitoring rubber aging precisely handling lightweight objects and cognizing natural objects surface characteristics.
May 27, 2026

Magnet-Based Soft Robotic Skin Using a 3D-Printed Multi-Lattice Structure and CNN-Based Tactile Super-Resolution

This paper presents a magnet-based robotic skin that integrates a multilayer soft lattice with distributed Hall-effect sensor arrays and a tactile super-resolution model. External contact forces are converted to magnetic field changes by embedded permanent magnets, and the lattice spreads these changes across the sensing domain. This gives each sensor a large, overlapping receptive field and enables a large sensing area with minimal blind spots. Lattice parameters are tunable, enabling joint adjustment of mechanical compliance and transduction characteristics. An implicit modeling workflow and selective laser sintering (SLS) 3D printing support rapid fabrication of conformal, high-complexity structures. A convolutional neural network trained on experimental measurements estimates contact location and normal force in real time. Experiments validate localization accuracy and indicate scalability to larger surfaces, suggesting applicability to whole-body robotic skin and safe human-robot interaction.