cs.RONov 2, 2026

W2A: Distilling World Priors into Action Models for Real-Time Robotic Control

Authors: Xiaopeng Zhang, Yongjin Mu, Yueyang Weng, Chengzhi Zhao, Yanjie Li

Organizations: Harbin Institute of Technology, Shenzhen

Abstract

World Action Models (WAMs) have recently shown great promise in robotic control, benefiting from the future imagination capability of large-scale pretrained video models. However, most existing WAMs require explicitly imagining future states at test time, incurring substantial computational overhead and latency that make them unsuitable for real-time robotic control. In this paper, we propose W2A, a two-stage distillation framework for real-time robotic manipulation that distills intermediate denoising representations from a video diffusion model into an action model during training, while entirely discarding the video model at test time. We hypothesize that although video latent representations are high-dimensional, a compressed low-dimensional subspace is sufficient to provide effective supervision for action generation. This makes it possible to transfer such information effectively into an action model. Extensive experiments in both simulation and real-world settings demonstrate competitive success rates while significantly improving inference efficiency. On LIBERO, W2A achieves a 95.9% average success rate. More importantly, W2A achieves about 21x faster inference than the representative WAM baseline.

Figures & tables

Appendix figures & tables21 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Jun 8, 2026

Efficient-WAM: A 1B-Parameter World-Action Model with Low-Cost Future Imagination

World-Action Models (WAMs) have emerged as a promising paradigm for embodied control by coupling future visual prediction with action generation. However, most existing WAMs rely on photorealistic future prediction, which incurs high inference latency and makes real-time robot deployment difficult. This motivates a more efficient WAM design that preserves the control benefits of future visual prediction while reducing its inference cost. We introduce Efficient-WAM, a World-Action Model that reduces the cost of future imagination while preserving its control benefit. Efficient-WAM improves inference efficiency via a compact video expert transferred from WAN-2.2-5B, token-sparse video latents, and asymmetric video-action denoising that allocates fewer sampling steps to video than to actions. Instead of optimizing the future branch for visual fidelity, Efficient-WAM treats future video prediction as a compact guidance signal for action generation. Comprehensive experiments on RoboTwin 2.0 and real-world manipulation tasks show that Efficient-WAM maintains strong action performance despite visibly coarse future predictions. While maintaining competitive control capabilities, our 1B-parameter model can reduce per-chunk latency to around 100 ms during physical deployment, achieving a 30x speedup over existing WAMs.
Jun 3, 2026

Flash-WAM: Modality-Aware Distillation for World Action Models

World-action models (WAMs) jointly generate future video and robot actions through iterative diffusion, achieving strong performance on manipulation benchmarks but requiring tens of denoising steps, a cost that precludes real-time control. Step distillation has emerged as the natural remedy, but off-the-shelf methods break down in the joint video-action setting because video and action streams use different SNR-shifted noise schedules and reach training with substantially different marginal noise distributions, an asymmetry that single-modality distillation methods cannot accommodate. We introduce Flash-WAM, a modality-aware step-distillation framework inspired by consistency distillation that selects the consistency function for each modality to match its noise regime: a linear-gradient-scaling parametrization for the action stream's low-noise regime, paired with a variance-preserving parametrization for the video stream's high-noise regime, grounded in a structural analysis of the consistency-function family that characterizes the achievable gradient scaling under the consistency boundary condition. Instantiated on LingBot-VA, Flash-WAM compresses inference to a single step in each modality. On RoboTwin 2.0, this reduces per-chunk latency from 8.18.1 seconds to 348348 ms on NVIDIA L40S, a 23×23{\times} speedup that enables real-time inference. Flash-WAM preserves task success on simulation benchmarks (85.5%85.5\% RoboTwin 2.0, 95.7%95.7\% LIBERO) and substantially recovers real-world performance (60%60\% average on a Unitree G1 humanoid robot), while naive consistency distillation drops to 24%24\% at the same step budget.
Oct 20, 2026

De-Diffusing WAMs: Action-Sufficient Direct Prediction for Robot Control

Cascade world-action models (WAMs) use predicted visual futures to condition robot actions, but inherit costly iterative inference from diffusion-pretrained experts. We ask what a single-step predicted future must preserve to support accurate single-step action prediction. In the evaluated WAM, resampling video noise has little effect on downstream actions, yet naively truncating both streams to one step substantially reduces task success. Video-space supervision only partially closes this gap, and a local sensitivity analysis shows that vision prediction errors have highly unequal consequences for action accuracy. These findings motivate DirectWAM, which converts pretrained video and action experts into single-step predictors without stochastic sampling through action-sufficient distillation, while retaining the explicit future-to-action cascade. After learning a one-step action model, we train the future predictor by decoding actions from its own predicted futures and backpropagating demonstration action error through the expert, with an optional future-latent reconstruction loss. The resulting objective evaluates the student-generated future through its downstream control consequences rather than relying on representation matching alone. DirectWAM achieves 97.1% average success across four LIBERO suites and 85.4% on RoboTwin 2.0, outperforming Flash-WAM at the same one-evaluation-per-stream budget. This advantage has also extended to three real-world tasks that we designed. Compared with the full iterative teacher, it reduces inference latency by 28.0×28.0\times.