cs.CVNov 3, 2026

Auditing Targetless Camera-LiDAR Extrinsic Correction before Recursive Use

Authors: Bo Ma, Weiqi Yan

Organizations: Auckland University of Technology, Auckland 1024, New Zealand

Abstract

Camera-LiDAR fusion repeatedly uses an extrinsic transform in projection, association, and recursive state estimation. We study whether a targetless correction should be admitted to a downstream consumer only after separate audits of correction quality, confidence ranking, and recursive risk. Our log-disjoint protocol evaluates these stages under synthetic extrinsic drift on Argoverse 2 and treats cross-dataset and odometry experiments as bounded diagnostics. On 27 test-split logs, single-frame Canny alignment is harmful in the mild tier. Multi-frame alignment improves severe-tier rotation by 2.52 degrees but worsens translation by 0.177 m; its declared joint error-magnitude improvement is also negative (-0.158, 95% CI [-0.223, -0.098]), so the rotation gain is not a six-degree-of-freedom correction success. A zero-injection check moves away from the true extrinsic, and solver-disagreement AUROC on selected splits does not yield a validated nonzero-coverage risk-coverage operating point. In a 15-log final system role, the locked conservative policy admits no candidate and equals Raw, whereas Always-correct increases trajectory error. These results support an auditable separation of correction, confidence, and recursive contamination; they do not establish a deployable calibration gate, positive odometry or SLAM improvement, map consistency, or closed-loop safety.

Figures & tables

Appendix figures & tables13 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Mar 31, 2026

Native-Domain Cross-Attention for Camera-LiDAR Extrinsic Calibration Under Large Initial Perturbations

Accurate camera-LiDAR fusion relies on precise extrinsic calibration, which fundamentally depends on establishing reliable cross-modal correspondences under potentially large misalignments. Existing learning-based methods typically project LiDAR points into depth maps for feature fusion, which distorts 3D geometry and degrades performance when the extrinsic initialization is far from the ground truth. To address this issue, we propose an extrinsic-aware cross-attention framework that directly aligns image patches and LiDAR point groups in their native domains. The proposed attention mechanism explicitly injects extrinsic parameter hypotheses into the correspondence modeling process, enabling geometry-consistent cross-modal interaction without relying on projected 2D depth maps. Extensive experiments on the KITTI and nuScenes benchmarks demonstrate that our method consistently outperforms state-of-the-art approaches in both accuracy and robustness. Under large extrinsic perturbations, our approach achieves accurate calibration in 88% of KITTI cases and 99% of nuScenes cases, substantially surpassing the second-best baseline. We have open sourced our code on https://github.com/gitouni/ProjFusion to benefit the community.
Oct 20, 2026

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...
Oct 3, 2026

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.