Authors: Taro Tako, Takanori Jin, Hiroshi Kaminaga, Taisuke Kobayashi
Organizations: National Institute of Informatics (NII) and with The Graduate University for Advanced Studies (SOKENDAI), 2-1-2 Hitotsubashi, Chiyoda-ku, Tokyo, 101-8430, Japan · CNRS-AIST JRL (Joint Robotics Laboratory), IRL 3218, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
Variable stiffness mechanisms that achieve both flexibility and rigidity are important technologies for robotic systems. Recently, wire-based jamming mechanisms have attracted significant attention. In the wire-based jamming mechanisms, modules are chained by a wire, and the overall stiffness is controlled by changing the friction between the modules through wire tension. These mechanisms have been widely studied due to their simple structure and controllability. However, conventional wire-based jamming mechanisms mainly focus on holding torque along the joint axis, and the resistance against disturbances in other directions has not been sufficiently explored. In this study, we propose a wedge-jamming mechanism that introduces wedge-shaped contact surfaces into the modules of wire-based jamming structures. By changing the wedge angle, the holding characteristics against disturbances in different directions can be adjusted. Experimental results show that an out-wedge configuration improves resistance to vertical disturbances, while an in-wedge configuration enhances resistance to torsional disturbances. These results demonstrate that the anisotropic holding performance of wire-based jamming mechanisms depend on wedge geometry.
Figures & tables
Figure 1: Principle of wire-based jamming mechanism
Figure 2: Two types of jamming mechanism
Figure 3: Perspective and side view of bead module
Figure 4: Perspective and side view of wedge module
Figure 5: Side view of bead and wedge module
Figure 6: Design illustration of proposed modules
Figure 7: Force test bench used to evaluate the holding torque of the wire-based jamming mechanism
Figure 8: Torsion test bench used to evaluate the torsional holding torque of the wire-based jamming mechanism. The series elastic actuator applies a torsional torque to the module, and the angular displacement is measured using the motor encoder.
Figure 9: The image of three types of disturbance directions: joint-axis direction, perpendicular to joint-axis direction and torsional
Figure 10: Relationship between wire tension and holding torque in the joint-axis direction disturbance
Figure 11: Relationship between wire tension and holding torque in the perpendicular to joint-axis direction disturbance
Figure 12: The experiment environment of relationship between the number of joints and average holding torque. In this image, it shows the example of pivot position 7th.
Figure 13: Holding torque in the joint-axis direction disturbance direction with different pivot position
Figure 14: Holding torque in the perpendicular to joint-axis disturbance direction with different pivot position
Figure 15: The figure shows the behavior of bead and out-wedge modules in slow motion when a perpendicular to joint-axis disturbance is applied with the pivot position set at the 7th from the base plate. The upper figure shows the bead modules, and the lower figure shows the out-wedge modules.
Figure 16: Relationship between torsional torque, angular displacement, and wire tension
The utility of flexible continuum mechanisms for dexterous navigation is often impaired by their low stiffness, making them ineffective at manipulation in high-force scenarios. To address this challenge, we propose a novel continuum mechanism that achieves both flexible and rigid behavior by antagonistic extension and contraction of a rod-driven continuum helical structure. The helical design combines variable-length capacity with force locking for workspace and stiffness enhancement. In this article, we present the detailed design of the proposed mechanism and characterize its performance through experiments that quantify bending and stiffness. The results demonstrate 180 degree bending range of motion with an average distal positioning error of <10%. Further tests demonstrate that force locking directly improves axial stiffness and thus indirectly increases bending stiffness anisotropically, with maximum bending stiffness along load paths with a large axial component. Tensioning the driving rods provides additional stiffness tunability in the force-locked state, where increasing rod tension proportionally increases bending stiffness with a dimensionless gain of 0.56.
Katelyn King, Veronica Fish, Allison M. Okamura
Department of Mechanical Engineering, Stanford University, Stanford, CA 94305, USA
Compliant mechanisms provide compact and intrinsic structural compliance for regulating physical interactions between mechanisms and environments. However, different tasks demand distinct stiffness characteristics, often requiring task-specific optimization and redesign due to limited geometric design space and inherent coupling among multiple stiffness components. This paper presents a Lego-like stiffness configuration approach using stackable planar compliant modules. Three complementary module geometries are introduced, with their stiffness characteristics further regulated through beam width, plate thickness, and module orientation. A unified stiffness model is established for quantitative analysis of individual and composed modules. Further, a two-stage optimization method is presented to achieve desired stiffness profiles, combining a genetic algorithm for configuration and sequential quadratic programming for parameter refinement. Experimental verification shows deviations below 6.5% for simulated stiffness. A flexible wrist is further developed as a representative implementation, exhibiting distinct compliant and dynamic responses under different stiffness characteristics. An optimized modular composition realizes prescribed stiffness values and maintains compliant obstacle interaction during high-speed motion at 1 m/s, with a maximum tested angular compliance of approximately 15∘. The proposed framework provides a systematic approach for constructing flexible interfaces with task-specific stiffness characteristics.
Siyue Yao, Xiaochi Xie, Shixuan Zhao +4
State Key Laboratory of Mechanical Systems and Vibration, Shanghai Jiao Tong University, Shanghai 200240, China · Department of Mechanical Engineering, Stanford University, USA · Shanghai Key Laboratory of Intelligent Robotics; META Robotics Institute, Shanghai Jiao Tong University, Shanghai 200240, China +1
Compliant mechanisms are important in robotics because they can improve adaptability, safety, and energy efficiency while reducing hardware complexity. This paper presents SPiralRoll, a novel torsion-spring-based underactuated compliant mechanism for rolling robots and compliant robotic actuation. The mechanism uses arc-distributed elastic members and two motor inputs to realize three physically observable output motions: rotational motion, radial expansion/contraction, and axial spin induced by nonlinear compliant deformation. Two configurations, namely full-arc and single-arc designs, are developed and experimentally evaluated. Beyond benchtop validation, the mechanism is integrated into a spherical rolling robot, where proof-of-concept experiments demonstrate forward rolling and turning. The results show that the full-arc design provides better structural support and smoother deformation, whereas the single-arc design yields larger deformation and stronger inertial excitation, making it more suitable for pendulum-driven rolling locomotion. Overall, SPiralRoll provides a low-cost, compact, and fully 3D-printable solution for underactuated compliant rolling robots and adaptive robotic joints.
Louis Keith, George Ripper, and Seyed Amir Tafrishi
Geometric Mechanics and Mechatronics in Robotics (gm2R) Lab, the School of Engineering, Cardiff University, Cardiff, CF24 3AA, United Kingdom