cs.LGNov 6, 2026

Transferring local rib responses to new component geometries in sheet forming with a graph-based Transformer

Authors: Yingxue Zhao, Haoran Li, Haosu Zhou, Tobias Pfaff, Nan Li

Organizations: Dyson School of Design Engineering, Imperial College London, London, UK · Prometheus, UK

Abstract

Sheet metal components often consist of a global geometry, such as the corner radii and forming depth of a corner component, and local features added to it. During forming, both affect material flow. A surrogate learning all their combinations may need large training data. However, the same local feature type is often used on many global geometries. This study therefore partly decouples local features from the global geometry. The local-feature effect is first learned on one global geometry, needing fewer simulations than learning all combinations, then transferred to other global geometries via transfer learning, which can need fewer target simulations than training from scratch. A baseline-conditioned residual surrogate, R-BiLoGo, is proposed for ribs on the side walls of hot-stamped corner components. Its inputs are the baseline response and the geometric perturbation introduced by the ribs. Its outputs are the changes in displacement and thinning from the baseline. R-BiLoGo gave lower errors than a hierarchical graph-based model and a Transolver-based model on the source geometry, and on two of three selected target geometries after transfer. Across the 22 target geometries, transfer learning with 20 target simulations gave errors similar to or lower than training from scratch with 80 target simulations for about half of the targets. With the same 80 target simulations, transfer learning reduced errors for 95% of targets. The effect of the global geometry on transfer was studied with four parameter-free geometric descriptors and controlled variations across 4 corner subclasses. The benefit of transfer decreased with increasing surface distance and high-curvature change between source and target, and for targets shallower than the source. These trends were also seen in other corner types with a different magnitude.

Figures & tables

Appendix figures & tables4 assets

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Nov 6, 2026

BiLoGo: Reducing the smoothing of localised responses in Transformer-based neural operators for sheet forming

Trial-and-error FE simulation of sheet forming could be computationally expensive, neural-network-based learned simulators are used to accelerate design. These simulators should accurately capture localised responses, such as thinning around sharp radii or near ribs, which determine formability. Transformer-based neural operators propagate information efficiently across the mesh but tend to smooth such localised responses. This study develops BiLoGo, a Bipartite Local-Global learned simulator with an FE-guided design that connects local node-element message passing with a Transformer-based neural operator for long-range information exchange. BiLoGo has three modules: a bidirectional node-element GraphSAGE model that learns nodal-elemental coupling on a bipartite graph and predicts each quantity on its native FE entity without interpolation; a dual-stream Transformer-based neural operator that processes blank deformation and tool contact with separate token sets, preventing localised contact information from being averaged with the whole-blank state; and a fusion and element update module that combines global and local features via gated residual fusion and updates element features conditioned on element-node kinematics. Evaluated on a dome-shaped cold forming case and two corner-shaped hot stamping cases (one with ribs), BiLoGo achieves the lowest positional and threshold-based thinning errors on all three cases compared with single-level and hierarchical graph-based models and Transformer-based neural operators. Near the ribs, the smoothing index of predicted thinning increases from 0.41-0.56 for Transformer-based neural operators to 0.94 for BiLoGo-U. Compared with the hierarchical graph network CAtt-BiUGNN, BiLoGo-T reduces mean positional error by 15.5% on the Corner case and BiLoGo-U by 8.3% on the Corner+Rib case, with 66-69% less training memory.
Oct 19, 2026

Open-Form Geometric Style Transfer

A geometric style learned from one family of shapes is typically applied to new shapes from the same family. We consider a more challenging setting: learning the geometric design language of a stylized Latin alphabet and applying it to new forms, from Greek glyphs to entirely different structures such as human poses. We introduce Open-Form Geometric Style Transfer, where the forms to which a learned geometric style can be applied are not restricted to the shape family in which that style was observed. This setting is deceptively challenging: the difficulty is not merely learning a style, but learning the style without learning the shape family in which it was observed. We represent target forms by structural sketches and disentangle structural adherence from style realization using a Geometry LoRA and a style-specific LoRA. Critically, open-form transfer requires the Geometry LoRA to be universal. To achieve this, we devise a geometry-enrichment strategy that constructs a large and purposefully diverse collection of synthetic structural sketches spanning a broad range of unfamiliar geometries. Our experiments and ablations demonstrate the importance of both disentanglement and this universal geometry prior, enabling geometric styles learned from glyphs, pictograms, and other shape families to be transferred to substantially different, unseen forms.
May 13, 2026

StampFormer: A Physics-Guided Material-Geometry-Coupled Multimodal Model for Rapid Prediction of Physical Fields in Sheet Metal Stamping

Traditional sheet metal forming relies on time-consuming and expensive Finite Element Analysis (FEA) for design validation, a process that significantly prolongs design cycles. While surrogate models offer faster iteration, current approaches have limitations: scalar-based methods cannot capture comprehensive field-based FEA results, while existing image-based models often ignore the critical role of material properties by focusing solely on geometry. To address this gap, we develop a physics-guided deep learning framework, namely StampFormer, which simultaneously uses component geometry and material stress-strain responses to predict FEA outcomes. The StampFormer framework uses three core components to process data. A Material-Augmented Geometric Network (MAGN) first fuses geometric and material data. This information is then integrated at various levels by a Hierarchical Material Embedding Injection Unit (HMEIU) before being processed by the primary network backbone, an adapted Swin-UNet. We evaluated our model on the stamping of a crossmember panel with two simulation datasets for steel and aluminium panels, and results demonstrate that StampFormer provides high-fidelity predictions of critical physical fields - including thinning, major strain, minor strain, plastic strain, and displacement - in under a second. Compared with ground truth FEA, our model achieved an average relative error of less than 8.5% on the four 2D fields and a mean squared error of less than 1.2 mm2 for the 3D displacement field. In summary, we introduce a practical and efficient framework that integrates multimodal information, namely geometry and material properties, to provide fast and accurate predictions, enabling designers to perform real-time manufacturability assessments.