Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education
Organizations: Department of Agricultural and Biological Engineering, Mississippi State University, Mississippi State, MS 39762, USA. · Agricultural Autonomy Institute
Abstract
Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.
Figures & tables
| Platform | Mobility | Onboard Computing | Primary Sensors | Manipulation | Validation Environment | Demonstrated Functions |
| Thymio [ 11 ] | Differential drive | PIC24F MCU | IR proximity and ground sensors | None | Desktop and tabletop | P, C |
| Mona [ 12 ] | Differential drive | ATmega328; optional Pi Zero | Five IR proximity sensors | None | Indoor arena | P, C |
| SMARTmBOT [ 13 ] | Differential drive with chain-linked front and rear wheels | Raspberry Pi 4; ROS 2 | Eight ToF sensors, camera, and IR line sensors | Optional 5-DOF arm | Indoor laboratory with motion-capture tracking | P, C |
| ROBOTONT [ 14 ] | Three-wheel Kiwi omnidirectional drive | Intel NUC and STM32 | RealSense RGB-D camera | None | Indoor classroom and laboratory | P, C, Pl |
| ROMR [ 10 ] | Differential drive with hoverboard BLDC motors | Jetson Nano and Arduino Mega | RGB-D camera, tracking camera, LiDAR, and IMU | None | Indoor environment | P, C, Pl a |
| MBot [ 15 ] | Differential, omnidirectional, or Ackermann drive | Raspberry Pi 4 or Jetson Nano; tier-dependent | LiDAR and camera; tier-dependent | None | Indoor courses and laboratories | P, C, Pl |
| Category | Component | Function |
| Vision | Logitech C270 (upper) | Navigation and task validation |
| Logitech C270 (lower) | Task detection | |
| Proximity | VL53L1X ToF sensor ( 7) | Obstacle and target ranging |
| Inertial | LSM6DSOx + LIS3MDL IMU | Orientation and heading |
| Proprioceptive | AS5048A magnetic encoder ( 4) | Wheel rotation feedback |
| STS3215 built-in encoder ( 9) | Joint angle feedback |
| Metric | YOLOv8n-seg | YOLO11n-seg |
| Mask | 0.950 | 0.958 |
| Valid centerlines | 66/68 | 66/68 |
| Near-field MAE (px) | 2.471 | 3.051 |
| Far-field MAE (px) | 0.756 | 0.731 |
| Path-angle MAE ( ∘ ) | 0.795 | 0.893 |
| Mean centerline jitter (px) | 3.110 | 2.763 |
| Model | GPU time (ms) | BEV/navigation (ms) | Total latency (ms) |
| YOLOv8n-seg | 2.167 | 142.879 | 159.208 |
| YOLO11n-seg | 2.537 | 143.776 | 161.269 |
| Gain | Speed | Lateral RMSE | Angular RMSE | Max. lateral error | Completion time | Mean course completion |
| Nominal | Low | 34.58 px | 1.20° | 294.00 px | 194.09 s | 100% |
| Nominal | High | 44.18 px | 1.98° | 257.00 px | 132.62 s | 95% |
| Nominal | Nominal | 42.92 px | 1.59° | 228.00 px | 141.51 s | 100% |
| High | Nominal | 58.75 px | 2.35° | 289.00 px | 143.85 s | 100% |
| Low | Nominal | 31.50 px | 1.15° | 175.00 px | 139.80 s | 100% |
| Condition | Verification | Successful Trials | Course Completion (%) | Successful Actions per Trial | Execution Time (s) |
| Low light | No | 5/5 | 100 | 25.6 | 526.67 |
| Low light | Yes | 5/5 | 100 | 26.0 | 595.39 |
| High light | No | 5/5 | 100 | 25.2 | 526.42 |
| High light | Yes | 5/5 | 100 | 25.8 | 589.25 |
| No soil | No | 5/5 | 100 | 25.4 | 484.89 |
| No soil | Yes | 5/5 | 100 | 25.6 | 552.15 |
Appendix figures & tables5 assets
Supplementary material from the paper’s appendix.
Appendix
| Target | Setting | Final error | Overshoot | Settle time |
| Platform align. | Too small | 1.62 px | 91.52 px | 22.48 s |
| Nominal | 2.54 px | 80.28 px | 7.15 s | |
| Too large | 7.89 px | 87.33 px | 4.21 s | |
| Centerline align. | Too small | 1.05 px | 109.17 px | 9.18 s |
| Nominal | 1.99 px | 110.78 px | 4.66 s | |
| Too large | 3.60 px | 112.52 px | 3.31 s |
| Target | Gain | Final error | Overshoot | Settle time |
| Platform align. | Low | 2.21 px | 53.67 px | 9.29 s |
| Nominal | 2.54 px | 80.28 px | 7.15 s | |
| High | 3.15 px | 140.74 px | 15.47 s | |
| Centerline align. | Low | 1.82 px | 89.43 px | 5.63 s |
| Nominal | 1.99 px | 110.78 px | 4.66 s | |
| High | 2.16 px | 125.75 px | 11.20 s |
| Task | Trial | T/A/S | Success (%) | Wrong/ misplaced | Time (s) |
| Plant toppling | 1 | 9/9/9 | 100.0 | 0 | 3.61 |
| 2 | 9/8/8 | 100.0 | 0 | 3.17 | |
| 3 | 9/9/9 | 100.0 | 0 | 3.14 | |
| 4 | 9/9/9 | 100.0 | 0 | 3.30 | |
| 5 | 9/8/8 | 100.0 | 0 | 3.45 | |
| Mean | – | 100.0 | – | 3.33 |
Agricultural Robotics
Agricultural robotics develops autonomous machines that sense, navigate, and perform tasks such as monitoring, weeding, spraying, and harvesting crops.
See all 101 papers