cs.CVNov 9, 2026

RAPA: Ray-Aware Physics Augmentation for Robust Camera-LiDAR Calibration

Authors: Kyung-Rin Oh, Ji-Hoon Kim, TaeJoon Ha, Jae-Sang Hyun

Organizations: Department of Mechanical Engineering, Yonsei University, Seoul, Republic of Korea · Yonsei Institute for Embodied Intelligence, Yonsei University, Seoul, Republic of Korea

Abstract

Camera-LiDAR calibration is essential for reliable perception in robotic and autonomous systems. Most target-based calibration methods rely on checkerboard observations, but accurate checkerboard feature extraction from LiDAR point clouds remains challenging due to measurement sparsity. Existing approaches either require manual annotation of 3D corners or depend on geometric feature extraction methods, both of which can become unreliable when checkerboard features are insufficiently observed. In this paper, we formulate checkerboard localization as a 2D detection problem using cylindrical LiDAR reflectivity images. To overcome the limited availability of labeled training data, we propose ray-aware physics augmentation (RAPA), which generates diverse synthetic samples from a single checkerboard observation. The generated data are used to improve detector robustness and generalization under varying sensing conditions. Across four independently captured indoor and outdoor locations, the proposed synthetic augmentation exceeds the strongest evaluated image-space augmentation baseline by 16.1-43.1 percentage points in [email protected]. Compared with training-free target-based methods on 242 observations, RAPA yields the largest number of valid target localizations, with 96.4% of its returned detections yielding valid target poses. These reliable localizations support downstream camera-LiDAR calibration across all four evaluated locations. Overall, RAPA addresses a key bottleneck in target-based calibration by enabling automated LiDAR-side target localization with only a single annotated target observation.

Figures & tables

Explore similar work

Sep 7, 2026

P2^2Calib: Utilizing Pattern Priors for LiDAR-Camera Extrinsic Calibration

Target-based LiDAR-camera extrinsic calibration is a prerequisite for multi-sensor fusion in robotics. However, in the widely adopted four-hole pipeline, \rt{calibration accuracy is limited by hole-center extraction in the LiDAR side, where sparse angular coverage and mixed-pixel returns displace the estimated centers}. This paper presents P2^2Calib, which exploits pattern priors, geometric constraints specified by the CAD model of the target board, to improve calibration accuracy. First, we incorporate the known hole radius as a fitting constraint to prevent center estimates from degrading under sparse angular coverage. Building on the improved hole estimates, we further enforce the rigid rectangular layout of the four holes as a global consistency constraint to correct residual errors across holes. Both priors are integrated into an \rt{interactive tool that runs the pipeline from target detection to the final extrinsic}. Experiments on simulated and real datasets show that P2^2Calib reduces the joint registration residual by 90% and 82% and the held-out reprojection error by 96% and 77% over the baseline. \rt{We will release the code and data\codelink{} to facilitate future research.
Oct 27, 2026

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.
Oct 20, 2026

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.