cs.LGNov 9, 2026

TACTUS: A Robotic Palpation System for Spatially Heterogeneous Hardness Mapping of Woody Breast Myopathy

Authors: Chaitanya Pallerla, Yihong Feng, Avisekh Tripathy, Yang Tian, Pouya Sohrabipour, Amirreza Davar, Casey M. Owens, Cengiz Koparan, 

Organizations: Department of Biological and Agricultural Engineering, University of Arkansas, Fayetteville, AR, USA, 72701. · Department of Food Science, University of Arkansas, Fayetteville, AR, USA, 72701. · Department of Poultry Science, University of Arkansas, Fayetteville, AR, USA, 72701.

Abstract

Woody breast (WB) myopathy is a spatially heterogeneous fibro-degenerative condition of the broiler Pectoralis major muscle. Existing mechanical reference methods rely on single-point or sequential compression measurements, limiting characterization of spatial hardness variability. This study presents TACTUS (Tactile Adaptive Conformal 3D Uniform Sensing), an automated tactile array that generates thickness-normalized, three-dimensional hardness maps at 20 anatomically distributed locations within approximately 30 s. TACTUS integrates 20 independently motorized tactuators with force-sensing resistors and encoder-driven linear actuators, alongside a LiDAR depth camera for surface profiling and adaptive compression. The system was evaluated using 100 broiler breast fillets across four WB severity classes (Normal, Mild, Moderate, Severe). TACTUS identified significant force differences among severity classes (ANOVA, p < 0.001), with the strongest differentiation in the cranial region and a significant caudal effect not detected by texture-analyzer measurements. Fillet-level TACTUS force showed moderate but significant correlation with texture-analyzer measurements (Pearson r = 0.441, p < 0.001). Semivariogram, local change entropy, and heterogeneity analyses revealed increasing and anatomically structured hardness variability with WB severity. These findings demonstrate TACTUS as an automated, operator-independent platform for spatially resolved mechanical characterization and ground-truth generation to support hyperspectral and near-infrared spectroscopy-based WB classification systems.

Figures & tables

Explore similar work

Nov 9, 2026

Smartphone-Enabled Depth-Aware Transillumination Imaging for Detection of Chicken Breast Fillet Myopathies in Chicken Fillets

Woody Breast (WB) myopathy is a major quality defect in broiler chickens characterized by fibrosis, increased tissue hardness, and altered structural properties that affect product quality. Conventional palpation is subjective and labor-intensive, while many non-destructive methods require specialized equipment or substantial computational resources. This study developed a smartphone-based transillumination and 3D point-cloud framework for non-destructive WB severity classification. A total of 267 chicken breast fillets, including normal breast (NB, n = 87), mild WB (MWB, n = 85), and severe WB (SWB, n = 95), were evaluated using RAW transillumination images and 3D point clouds acquired with an iPhone 16 Pro. A total of 91 features, comprising 14 image-derived, 76 geometric, and one physics-informed Beer-Lambert attenuation feature, were extracted. Partial correlation controlling for thickness revealed a significant association between image characteristics and WB severity (r = 0.413, p < 0.0001), indicating optical information independent of fillet geometry. SWB tissue exhibited approximately 26% greater light attenuation per unit thickness than NB. The 2D-only models achieved approximately 82% test accuracy, while the multimodal ensemble combining Fusion-DGCNN, XGBoost, and physics-guided logistic regression (PGLR) achieved approximately 90% accuracy. These findings demonstrate the complementary value of optical, geometric, and physics-informed features and establish the feasibility of smartphone-based, non-destructive WB severity assessment.
Jun 15, 2026

Simulation-Based Multi-Fillet Evaluation of Woody Breast Poultry Fillets

Woody breast (WB) is a myopathy in modern broiler chickens that causes the breast muscle to become unusually stiff and fibrous, leading to decreased meat quality and significant economic losses. State-of-the-art automated WB detection relies on a side-view imaging system to analyze the bending behavior of a single fillet as it falls off a conveyor belt. While highly accurate, this approach is constrained by its single-fillet field of view, creating throughput bottlenecks on commercial processing lines. In this paper, we address this limitation via a novel multi-fillet detection architecture utilizing a top-down camera configuration. To validate our approach, we first develop a high-fidelity digital twin of an industrial conveyor system. Next, we synthesize a diverse dataset of 3D fillet meshes and model their viscoelastic bending dynamics using a physics-based simulation engine. Lastly, a continuous 2D shape deformation score is extracted from the top-down perspective as the simulated fillets traverse the roller precipice. Experimental results demonstrate that the top-down shape score effectively captures the contour changes of the fillets as it bends, providing a robust and scalable alternative to a side-view imaging system for simultaneous multi-fillet WB evaluation.
Oct 14, 2025

Vision-Based Tactile Sensing for the Perception of the Object's Compliance and Hardness

Object compliance perception enables the identification of soft materials, supporting tasks such as fruit detection and assisted medical palpation. Compliance perception requires sensing an object's deformation and contact forces. Existing vision-based tactile sensing for compliance perception usually depends only on force or deformation. However, deformation-based approaches cannot reliably quantify object compliance, while force-based methods are overly sensitive to geometric variations. To address these limitations, this paper presents a framework that fuses temporal force sequences and deformation field information. Specifically, time-varying contact forces are inferred from tactile image sequences via a neural network, while deformation characteristics are encoded using depth maps. Crucially, the temporal force sequence is used as a dynamic force-response feature for compliance recognition. In standard experiments, the force prediction error reaches 0.06 N within a measurement range of 12 N. The proposed method achieves a 98.0% Shore-hardness classification accuracy for samples ranging from 10 HA to 80 HA. In practical scenarios, including abnormal fruit detection and soft matter, the overall accuracy exceeds 98.5%. This method improves the compliance perception ability of artificial tactile systems and facilitates their deployment in embodied perception applications.