cs.RONov 10, 2026

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

Authors: Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli

Organizations: The authors are with DEI - Department of Electrical, Electronic and Information Engineering, University of Bologna, 40136 Bologna, Italy.

Abstract

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

Figures & tables

Explore similar work

Sep 22, 2026

Manipulation with Stability Guarantees: Linear Deformable Objects with Non-negligible Physical Response Grasped at Multiple Location

Most research on the manipulation of deformable objects focuses on lightweight systems with negligible mechanical response, effectively restricting attention to quasi-static regimes. This assumption excludes a broad class of practically relevant objects, such as hoses, pipes, and wiring harnesses, whose dynamics cannot be ignored during manipulation. In this work, we address this limitation by introducing a closed-loop control architecture that explicitly accounts for object dynamics and recasts manipulation as a shape-regulation problem. Control is achieved by modulating forces and torques applied at multiple fixed points along the object. This approach builds on three methodological contributions: a fully dynamic model of linear deformable objects based on discrete strain parameterizations; an extension of the notion of actuation coordinates to SE(3), yielding a structured and inherently underactuated control architecture; and nonlinear feedback strategies providing explicit conditions for steady-state convergence to desired configurations. Extensive simulations on representative manipulation tasks demonstrate the performance gains enabled by the proposed modelbased formulation. We finally validate the approach experimentally through a real-time closed-loop implementation with online shape estimation, confirming its practical feasibility and effectiveness
Oct 25, 2026

PS-DLO: Property- and Spatially Aware Deformable Linear Object Manipulation Policy

Deformable linear objects (DLO) pose a coupled perception and control challenge: their slender geometry makes precise localization difficult, while their deformations depend on object-specific physical properties. To address this challenge, we propose PS-DLO, a property- and spatially aware DLO manipulation policy. First, contrastive image-text learning maps the initial observation to categorical descriptions of DLO properties, providing explicit physical and structural priors for action generation. Second, SAM3 extracts mask-guided features from future observations, which are distilled into the policy's action expert to encode task-relevant DLO regions and their subsequent configurations. We evaluate PS-DLO on nine real-world tasks across single-arm and bimanual platforms, training a shared multi-task policy for each embodiment. PS-DLO achieves an average success rate of 68.9%, exceeding the strongest baseline by 20.0 percentage points. In generalization experiments, PS-DLO achieves higher success rates than the baseline in six of seven visual-shift conditions on butterfly-knot untying. These results demonstrate that combining object-property priors with future spatial supervision improves multi-task DLO manipulation and robustness to visual variation.
Sep 11, 2026

Online Material Estimation for Conditioned Diffusion Policy in Shaping Deformable Linear Objects

Shape control of deformable linear objects (DLOs) is challenging for imitation learning because deformation behavior varies with material properties such as stiffness and elasticity, so a single policy must generate different action sequences for different objects even when the goal shape is identical. We propose a diffusion policy conditioned on material labels that are estimated online during manipulation. A recurrent estimation network predicts the material label of the grasped object from the time series of multi-view images and robot joint states, and the predicted label conditions the diffusion policy at every inference step. We collected 480 real-robot demonstrations covering four DLO materials and three groove-placement tasks, and compared per-material specialist policies, a task-conditioned policy without material labels, a policy conditioned on ground-truth material labels, and the proposed policy. Conditioning on ground-truth material labels improved the average success rate from 45.8% to 60.0% over the task-only policy, and the proposed policy reached 60.8% without any prior material information, matching the policy given ground-truth labels. A post-hoc analysis shows that the estimator extracts material-related information from the manipulation observations and that the diffusion policy responds to the resulting conditioning signal, while the one pronounced failure case is associated with persistent confusion between two similar materials.