cs.RONov 13, 2026

Modeling the Frictional Contact of Continuum Robots with Environments through Linear Complementarity Problem

Authors: Jia Shen, Junhyoung Ha, Yue Chen

Organizations: The Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology/Emory University, Atlanta, GA, USA. · Department of Mechanical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea.

Abstract

Accurate friction modeling in continuum robots is essential for precise motion control and path planning. However, current approaches make predictions only for the mechanism's internal friction that is limited by the boundary forces of the Coulomb friction cone, which fail to characterize the static friction and motion hysteresis. In this paper, we propose a novel friction model based on complementarity constraints under the Coulomb friction assumption. This model predicts various friction effects caused by environmental interactions, including both static and sliding frictions and hysteresis behavior, as well as the corresponding robot deformation induced by these interactions, which are crucial for the practical motion planning and control of continuum robots. Additionally, real-time implementation of this model can be achieved, meeting the demand for computational efficiency in robotic applications. Experimental validations demonstrated that this model is able to reduce the maximum tip position error from 45.4 mm in the frictionless model to 5.85 mm in our friction-included model with a 287.9 mm-long tendon-driven continuum robot.

Figures & tables

Appendix figures & tables1 asset

Supplementary material from the paper’s appendix.

Appendix

Explore similar work

Apr 17, 2026

Contact-Aware Planning and Control of Continuum Robots in Highly Constrained Environments

Continuum robots are well suited for navigating confined and fragile environments, such as vascular or endoluminal anatomy, where contact with surrounding structures is often unavoidable. While controlled contact can assist motion, unfavorable contact can degrade controllability, induce kinematic singularities, or introduce safety risks. We present a contact-aware planning approach that evaluates contact quality, penalizing hazardous interactions, while permitting benign contact. The planner produces kinematically feasible trajectories and contact-aware Jacobians which can be used for closed-loop control in hardware experiments. We validate the approach by testing the integrated system (planning, control, and mechanical design) on anatomical models from patient scans. The planner generates effective plans for three common anatomical environments, and, in all hardware trials, the continuum robot was able to reach the target while avoiding dangerous tip contact (100% success). Mean tracking errors were 1.9 +/- 0.5 mm, 1.2 +/- 0.1 mm, and 1.7 +/- 0.2 mm across the three different environments. Ablation studies showed that penalizing end-of-continuum-segment (ECS) contact improved manipulability and prevented hardware failures. Overall, this work enables reliable, contact-aware navigation in highly constrained environments.
Feb 24, 2026

Unified Complementarity-Based Contact Modeling and Planning for Soft Robots

Soft robots were introduced in large part to enable safe, adaptive interaction with the environment, and this interaction relies fundamentally on contact. However, modeling and planning contact-rich interactions for soft robots remain challenging: dense contact candidates along the body create redundant constraints and rank-deficient LCPs, while the disparity between high stiffness and low friction introduces severe ill-conditioning. Existing approaches rely on problem-specific approximations or penalty-based treatments. This letter presents a unified complementarity-based framework for soft-robot contact modeling and planning that brings contact modeling, manipulation, and planning into a unified, physically consistent formulation. We develop a robust Linear Complementarity Problem (LCP) model tailored to discretized soft robots and address these challenges with a three-stage conditioning pipeline: inertial rank selection to remove redundant contacts, Ruiz equilibration to correct scale disparity and ill-conditioning, and lightweight Tikhonov regularization on normal blocks. Building on the same formulation, we introduce a kinematically guided warm-start strategy that enables dynamic trajectory optimization through contact using Mathematical Programs with Complementarity Constraints (MPCC) and demonstrate its effectiveness on contact-rich ball manipulation tasks. In conclusion, CUSP provides a new foundation for unifying contact modeling, simulation, and planning in soft robotics.
Nov 6, 2026

Locating Contact on Tendon-Driven Continuum Robots From Tendon Measurements Alone via Constrained Moving Horizon Estimation

Tendon-driven continuum robots can reach through constrained spaces, but contact along their bodies is invisible to the sensors at their motors. We show that this is a structural limitation rather than a tuning problem: the map from contact forces to tendon measurements has a null space of dimension at least seven, so no estimator that leaves the contact support free can locate contact. When the obstacle geometry is known, however, non-penetration and complementarity make the contact force locally identifiable, and we prove that the resulting system with unknown contact inputs is locally exponentially strongly detectable. We present a constrained moving horizon estimator (MHE) that encodes these conditions and runs in real time as one quadratic program per sample, and we give a local, mode-wise robust stability result for it. In a finite- element benchmark of a two-section robot pressing and sliding on a wall, the estimator located contact to 0.9 mm and estimated contact force to 0.22 N, compared with 65 mm and 0.72 N for a tuned extended Kalman filter (EKF) with state projection. The estimator tolerated millimeter- level errors in the obstacle position and unmodeled wall friction, under which the projected EKF failed. Under randomized model mismatch over 40 trials, including unmodeled tendon friction, it remained better in force and location in every trial. Without contact, the MHE offered no advantage over the EKF, which confirms that its benefit comes from the contact constraints. This report extends a letter submitted to IEEE Control Systems Letters with complete proofs and additional experiments.