cs.ARNov 16, 2026

ThermLeT: Transformer-based Temperature Prediction for 2.5D Chiplet Architecture

Authors: Varun Darshana Parekh, Anusha Devulapally, Sivani Devarapalli, Cassius Henderson, Shimeng Yu, Vijaykrishnan Narayanan

Organizations: The Pennsylvania State University · Georgia Institute of Technology

Abstract

The drive toward heterogeneous 2.5D chiplet packages promises unmatched performance and customization, yet the resulting density amplifies thermal challenges. To facilitate rapid design space exploration, we present ThermLeT, a multimodal transformer-based, scale invariant surrogate that integrates power density maps, spatial coordinate embeddings, material properties and heat transfer rate to predict steady state temperature in 13 ms, about four orders of magnitude faster than conventional finite element solvers such as ANSYS. To train the transformer model, we also create a dataset of 6,221 chiplet layouts perturbed from three representative architectures. On a 150 sample test set, ThermLeT achieves an RMSE of 3.16°C and an MAE of 2.24°C, improving accuracy by 35% over ThermEDGe and by 71% over HotSpot, while running approximately 6x and 11x lower inference latencies respectively. Ablation studies confirm robust generalization to unseen floorplans. Code and dataset available at https://github.com/MicroSystemsDesignLab/ThermLeT

Figures & tables

Explore similar work

Aug 22, 2026

TherMapNet Attention-Guided Runtime Full-Chip Thermal Map Prediction from Performance Metrics

Runtime thermal management of high-performance chips depends on fast and accurate full-chip thermal maps. Conventional simulators typically estimate power traces from performance metrics first, which adds overhead. This work proposes TherMapNet, an attention-guided thermal simulator that predicts full-chip thermal maps directly from performance metrics. A Transformer encoder captures temporal evolution by treating the time series of each metric as a token, improving modeling of dynamic workloads. A CNN then extracts fine-grained spatial features. For the CNN, a dual-branch channel-spatial attention convolution module (DACM) and a triplet loss are used to improve spatial learning and reconstruction accuracy. TherMapNet is applied to a multi-core CPU (AMD Ryzen 7 4800U) and a many-core GPU (NVIDIA GeForce RTX 4060). Experiments show that it outperforms prior thermal simulators, with RMSE below 0.26 C and inference under 2.4 ms on an NVIDIA GeForce RTX 3090 GPU. These results indicate that TherMapNet can support high-quality runtime thermal management of modern multi-core chips.
Jul 28, 2026

Recursive transformers for semiconductor thermo-mechanical reliability

Transformer-based surrogate models are increasingly used to replace expensive first-principles simulation in engineering design. But conventional transformer architectures are often over parameterized for the small, low-dimensional datasets typical of engineering design spaces, where large simulation data is expensive to generate. Under these conditions, excess parameter capacity leads to overfitting rather than improved accuracy, while also incurring unnecessary memory and compute overhead. This motivates a shift towards architectures that focus on additional compute rather than additional learnable parameters. This paper presents a hardware-aware evaluation of three recursive transformer paradigms for surrogate thermo-mechanical analysis of advanced packages: a)Tiny Recursive Model, b) our proposed Depth Recursive transformer, c) and a simple recursive transformer. We systematically compare their predictive performance (Recall, Mean Reciprocal Rank), parameter count, computational complexity (FLOPs), providing practical design guidelines for selecting recursive transformer architectures under resource-constrained scenarios. We validate this principle on two low-dimensional engineering prediction tasks: 1) thermo-mechanical reliability analysis of advanced semiconductor packages, where stress and warpage from thermal cycling must be evaluated repeatedly across a design-of-experiments sweep under costly finite element analysis (FEA). 2) Laplace PDE iterative numerical solver for capacitance field. Overall, recursive weight-sharing transformers provide an effective and generalizable trade-off between prediction accuracy, parameter efficiency, and computational cost for small data engineering surrogate modeling.
Oct 1, 2026

A Composable AI-Accelerated Iterative Solver for 3D-IC Thermal Modeling

Accurate thermal analysis of heterogeneous 2.5D/3D-IC packages is essential yet computationally prohibitive. A single full-package FEM simulation can take hours, while AI-based surrogates treat the entire stack as a monolithic prediction target and must be retrained whenever the die count or topology changes. To address this limitation, this work proposes Domain-Decomposed AI-Accelerated Iterative Solver for Thermal Analysis (DAIST), a composable thermal solver that decomposes the global package simulation into block-level subdomain problems, replaces subdomain solvers with neural operators, and couples them through iterative exchanges of interfacial temperature and heat flux. This local-to-global architecture eliminates the topology lock-in of monolithic models: block-level neural operators can be directly reused in unseen package assemblies without retraining. The iterative coupling strategy further provides a controllable accuracy-runtime tradeoff, where the iteration budget can be adjusted to trade accuracy for runtime. Evaluated on a multi-chiplet system and an advanced packaging system, DAIST achieves up to 178×178\times speedup over traditional FEM solvers with mean temperature errors of 0.068% and 0.323%, respectively, while demonstrating cross-topology reuse of block-level models across structurally distinct package assemblies.